1. Introduction
Thank you for choosing the VASAGLE KDT077B01 Foldable Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new table. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Warnings
- Assembly may involve small parts. Keep all components out of reach of children during assembly.
- Do not exceed the recommended maximum weight capacity of 50 kg (110 lbs) to ensure stability and prevent damage.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Avoid standing or sitting on the table.
2. Package Contents
Before assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop components (main section and drop leaves)
- Table legs (4 units)
- Assembly hardware kit (screws, bolts, washers, Allen key)
- Instruction manual
3. Assembly Instructions
Assembly requires approximately 30-60 minutes and is recommended for two people. A screwdriver is the only additional tool recommended.
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Refer to the included illustrated instructions and numbered parts to identify each piece.
- Attach Table Legs: Securely attach the four table legs to the main tabletop section using the provided screws and Allen key. Ensure all connections are firm.
- Install Drop Leaf Mechanisms: Attach the folding support mechanisms to the underside of the main tabletop and the drop leaves as indicated in the diagram. Ensure the hinges operate smoothly.
- Attach Drop Leaves: Connect the drop leaves to the main tabletop using the installed mechanisms. Test the folding and extending action to ensure proper alignment.
- Adjust Feet: The table features adjustable feet. Once assembled, place the table in its desired location and adjust the feet to ensure the table is level and stable on uneven floors.
4. Operating the Foldable Mechanism
The VASAGLE KDT077B01 table is designed for versatility, allowing you to easily adjust its size to suit your needs.
Extending the Table
- Locate the drop leaves on either side of the main tabletop.
- Gently lift one drop leaf upwards until it is level with the main tabletop.
- Pull out the support arm located underneath the drop leaf until it locks into place, providing stable support.
- Repeat for the other drop leaf if full extension is desired.
Folding the Table
- Push the support arm back underneath the drop leaf to unlock it.
- Gently lower the drop leaf downwards until it hangs vertically alongside the table legs.
- Repeat for the other drop leaf if a compact configuration is desired.
5. Care and Maintenance
Proper care will help maintain the appearance and longevity of your table.
- Cleaning: Wipe the table surface with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, which can damage the finish.
- Spills: Clean up spills immediately to prevent staining, especially on the engineered wood surface.
- Heat and Moisture: Use coasters and placemats to protect the surface from hot items and moisture.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
- Hardware: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
6. Troubleshooting
If you encounter any issues with your table, please refer to the following common solutions:
- Table is Wobbly: Ensure all assembly screws are fully tightened. Adjust the leveling feet on the bottom of each leg to compensate for uneven floor surfaces.
- Drop Leaves Not Level: Check that the support arms are fully extended and locked into place. Ensure the hinges are correctly installed and not bent.
- Difficulty Removing Stickers: Some identification stickers may leave residue. Use a mild adhesive remover or rubbing alcohol on a soft cloth to gently clean the area. Test on an inconspicuous spot first.
- Greasy Mechanical Parts: Some mechanical parts may have a protective grease. Wipe off any excess grease with a paper towel or cloth before handling to avoid transfer.
- Missing Parts: If any parts are missing from the assembly kit, please contact VASAGLE customer support with your product model number and a description of the missing parts.
7. Product Specifications
| Feature | Specification |
|---|---|
| Brand | VASAGLE |
| Model Name | VASAGLE KDT077B01 |
| Model Number | KDT077B01 |
| Material | Engineered Wood (Tabletop), Alloy Steel (Frame) |
| Color | Rustic Brown and Ink Black |
| Dimensions (Fully Extended) | 120 cm (L) x 78 cm (W) x 75 cm (H) |
| Dimensions (Folded) | 84.5 cm (L) x 78 cm (W) x 75 cm (H) |
| Weight | 20.9 Kilograms |
| Maximum Weight Capacity | 50 Kilograms |
| Seating Capacity (Extended) | 4 People |
| Seating Capacity (Folded) | 2 People |
| Special Features | Extendable, Foldable, Adjustable Feet |
| Assembly Required | Yes (2 people recommended) |
8. Warranty and Customer Support
For any questions, concerns, or issues regarding your VASAGLE KDT077B01 Foldable Dining Table, please contact VASAGLE customer support. Details regarding warranty coverage can typically be found on the product packaging or the official VASAGLE website.
Please have your model number (KDT077B01) and purchase information ready when contacting support to ensure efficient service.