1. Introduction and Overview
The Donner M-10 is a versatile 10W portable electric guitar amplifier designed for practice, recording, and small gigs. It features a unique APP effects input, a wide range of tone controls, and multiple input interfaces for diverse musical needs. Its sturdy construction ensures durability and stability.
Image: Front view of the Donner M-10 amplifier, showcasing its compact design and speaker grille.
2. Product Features
- Unique APP Effector Input: The M-10 includes a 1/8" TRRS guitar interface, allowing connection to a mobile phone for utilizing software effects for practice, playing, and recording. Users can build custom effector chains on software to achieve desired tones.
- Tone Control for Heavy Music: This 10-watt electric guitar amplifier provides extreme distortion sounds through intuitive controls, specifically tailored for heavy music players.
- Extensive Tone Control: Features controls for Gain, a distortion selection switch, Volume, Treble, Midrange, and Bass, offering a broad range of tonal adjustments.
- Diversified Input Interfaces: Equipped with a 1/4" Instrument Input, 3-Band EQ, a 1/8" Auxiliary Input Jack for playing along with media players or CDs, and a 1/8" Headphone Output Jack for silent practice.
- Durable Construction: The amplifier's edges are reinforced with hard material to protect against damage, and rubber pads ensure safe and stable placement.
Image: Close-up of the Donner M-10 control panel, highlighting the input jacks and control knobs.
3. Setup and Getting Started
- Unpacking: Carefully remove the amplifier from its packaging. Inspect for any signs of damage.
- Power Connection: Connect the amplifier to a power source using the provided USB-C cable. The charging port is located on the rear panel. A red indicator light will show charging status, turning off when fully charged.
- Initial Placement: Place the amplifier on a stable, flat surface. Ensure adequate ventilation around the unit.
Image: Rear view of the Donner M-10 amplifier, showing the USB-C charging port, headphone jack, and AUX input.
4. Operating Instructions
- Power On/Off: Locate the power switch on the amplifier's control panel and switch it to the 'ON' position.
- Connecting Your Instrument: Plug your electric guitar or bass into the 1/4" Instrument Input jack.
- Adjusting Volume: Use the 'Volume' knob to control the overall output level of the amplifier.
- Tone Shaping:
- 'Gain' knob: Controls the amount of input signal, affecting the level of distortion.
- 'Distortion Selection Switch': Toggle between clean and distorted tones.
- 'Treble', 'Midrange', 'Bass' knobs: Adjust the high, mid, and low frequencies of your tone.
- Using APP Effects: Connect your mobile phone to the 1/8" TRRS guitar interface. Use compatible software effects applications (e.g., Amplitube, Deplike, Tone-bridge, Bias, TC Guitar Rack) to customize your sound.
- Auxiliary Input: Connect an external audio device (e.g., MP3 player, CD player) to the 1/8" Auxiliary Input Jack to play along with backing tracks.
- Headphone Use: For silent practice, plug headphones into the 1/8" Headphone Output Jack. This will mute the main speaker output.
Image: Detailed view of the Donner M-10 amplifier's control panel, showing all knobs and input/output jacks.
Official Product Videos
Video: "Donner M-10 Guitar AMP" - An official product video from Donner showcasing the M-10 amplifier's features and sound capabilities.
Video: "Electric Guitar Amp Portable with APP Effector Input" - An official product video from DonnerDirect demonstrating the M-10 amplifier's portability and APP effector input functionality.
Video: "Donner M-10 10W Guitar Amplifier, Electric, Bass and Acoustic Guitar Amp, with APP Effector In" - An official product video from DonnerDirect highlighting the M-10 amplifier's compatibility with electric, bass, and acoustic guitars, and its APP effector input.
5. Maintenance
- Cleaning: Use a soft, dry cloth to wipe down the amplifier's exterior. Avoid using abrasive cleaners or solvents.
- Storage: Store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Always use the built-in handle for transport. Avoid dropping or subjecting the amplifier to strong impacts.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output | Amplifier not powered on; Volume knob too low; Instrument cable faulty; Headphones plugged in. | Ensure power is on; Increase Volume; Check/replace instrument cable; Unplug headphones. |
| Distorted sound (unintended) | Gain knob too high; Distortion switch engaged; Faulty instrument/cable. | Reduce Gain; Disengage Distortion switch; Check instrument/cable. |
| APP effects not working | Phone not connected correctly; Incompatible APP; Software settings incorrect. | Ensure secure connection to 1/8" TRRS jack; Verify APP compatibility; Check APP settings. |
| Battery not charging | USB-C cable faulty; Power adapter faulty; Charging port damaged. | Try a different USB-C cable/power adapter; Contact customer support if issue persists. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | M-10 |
| Output Wattage | 10 Watts |
| Item Weight | 11.08 pounds |
| Product Dimensions | 12.2 x 7.09 x 5.51 inches |
| Color | Black |
| Material Type | Rubber |
| Compatible Devices | Guitar |
| Connector Type | 3.5mm Jack, 6.35mm Jack |
| Power Source | Electric |
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Donner website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.
