Young YY-JVC-997

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Young JVC-997 Replacement Remote Control User Manual

Model: YY-JVC-997

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Young JVC-997 Replacement Remote Control. This universal remote is designed to be compatible with most JVC LCD LED Smart TVs, offering a seamless replacement experience.

Please read this manual thoroughly before using the remote control to ensure proper functionality and longevity of the device.

Product Overview

Front view of the Young JVC-997 Replacement Remote Control
Figure 1: Front view of the Young JVC-997 Replacement Remote Control. This image displays the full layout of the remote, including all buttons such as power, input, navigation, volume, channel, and numeric keypad.
Angled view of the Young JVC-997 Replacement Remote Control
Figure 2: Angled view of the Young JVC-997 Replacement Remote Control. This perspective highlights the ergonomic design and button placement from a side angle, showing the power button and top row of controls.

The Young JVC-997 Replacement Remote Control is designed for ease of use and direct compatibility with a wide range of JVC LCD LED Smart TVs. It features a standard button layout for intuitive navigation and control of your television.

Setup

1. Battery Installation

The remote control requires two (2) AAA alkaline batteries for operation. Follow these steps to install the batteries:

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards or outwards to open it.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Close the battery compartment cover by sliding it back into place until it clicks securely.

Note: Always use new batteries of the same type. Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote will not be used for an extended period.

2. Initial Use

This remote control is designed to work out of the box with most JVC LCD LED Smart TVs. No programming or pairing is typically required. Once batteries are installed, point the remote control towards your JVC TV and begin using it.

Operating Instructions

The JVC-997 remote control provides full functionality for your JVC television. Below are common functions and their corresponding buttons:

  • POWER (Red Button): Turns the TV on or off.
  • INPUT / SOURCE: Selects the input source (e.g., HDMI, AV, Component).
  • Numeric Keypad (0-9): Directly enters channel numbers.
  • CH +/-: Changes channels up or down.
  • VOL +/-: Adjusts the volume level.
  • MUTE: Mutes or unmutes the TV sound.
  • MENU: Accesses the TV's main menu.
  • Navigation Buttons (Up, Down, Left, Right): Navigates through menus and options.
  • OK / ENTER: Confirms selections in menus.
  • BACK / EXIT: Returns to the previous screen or exits a menu.
  • GUIDE: Displays the electronic program guide (if supported by your TV).
  • MEDIA: Accesses media playback functions.
  • HDMI / VIDEO / COMP / MUSIC / PC / TV: Direct input selection buttons.
  • Colored Buttons (Red, Green, Yellow, Blue): Functionality varies by TV model and application. Refer to your TV's manual for specific uses.

For specific advanced functions or smart TV features, refer to your JVC television's original user manual, as some functions may be TV-dependent.

Maintenance

Proper care and maintenance will extend the life of your remote control:

  • Cleaning: Wipe the remote control regularly with a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials.
  • Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time.
  • Storage: Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Avoid Drops: Protect the remote from physical impact. Dropping the remote can damage internal components.
  • Liquid Exposure: Do not expose the remote control to liquids. If liquid spills on the remote, remove batteries immediately and allow it to dry completely before reinserting them.

Troubleshooting

If you experience issues with your Young JVC-997 Replacement Remote Control, refer to the following common solutions:

ProblemPossible Cause / Solution
Remote not working at all.
  • Batteries: Check if batteries are installed correctly (polarity). Replace with new AAA batteries.
  • Line of Sight: Ensure there are no obstructions between the remote and the TV's infrared sensor.
  • Distance: Make sure you are within the effective range of the remote control.
Remote works intermittently.
  • Low Batteries: Replace batteries.
  • Interference: Other electronic devices might be causing interference.
  • Dirty Sensor: Clean the TV's IR sensor and the remote's IR emitter with a soft cloth.
Certain buttons do not work.
  • Compatibility: While universal, some very specific TV functions might not be supported by all replacement remotes. Refer to your TV's manual.
  • Stuck Button: Check if the button is physically stuck or damaged.
TV does not respond to remote.
  • TV Power: Ensure the TV is powered on and not in standby mode.
  • TV Sensor: The TV's infrared sensor might be blocked or faulty.
  • Remote Reset: Remove batteries, press all buttons a few times to discharge any residual power, then reinsert batteries.

If the problem persists after trying these solutions, please contact customer support.

Specifications

Model NumberYY-JVC-997
BrandYoung
Compatible DevicesJVC LCD LED Smart TV (most models)
Connectivity TechnologyInfrared (IR)
Power Source2 x AAA Alkaline Batteries (not included)
Product Dimensions9 x 2 x 1 inches (approximately)
Item Weight4 ounces (approximately)
Special FeatureUniversal Replacement

Warranty and Support

Warranty Information

This product comes with a one-year free quality guarantee from the date of purchase. This warranty covers manufacturing defects and ensures the remote control functions as intended under normal use.

The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or improper battery installation.

Customer Support

If you have any questions, concerns, or require assistance with your Young JVC-997 Replacement Remote Control, please do not hesitate to contact our customer support team. We are committed to providing satisfactory solutions.

For support, please refer to the contact information provided by your retailer or the manufacturer's official website.

© 2024 Young Electronics. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.