BOXY Night Stand BLDC Watch Winder NS-BLDC Instruction Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your BOXY Night Stand BLDC Watch Winder NS-BLDC. Please read these instructions carefully before use to ensure optimal performance and longevity of your device.

The BOXY Night Stand BLDC Watch Winder is engineered to keep your automatic watch accurately wound and ready for wear. It features an innovative BLDC motor, known for its reliability, energy efficiency, extended lifespan, and exceptionally quiet operation.

Product Features

• Innovation BOXY BLDC Motor: Offers reliable, power-saving, and quiet operation with a long lifespan.
• Eco-friendly USB Power: The included USB cable allows power from any compatible USB adapter or power bank with an output voltage of 3.3V-5V, eliminating the need for a dedicated adapter.
• Comprehensive Functionality: Features 3 direction settings (Clockwise, Counter-Clockwise, Bi-directional) and 4 Turns Per Day (TPD) settings (650, 950, 1250, 2500) to accommodate various automatic watch requirements.
• Compact Design: With dimensions of 5" x 3.35" x 5.7" (H), it is designed to fit discreetly on a nightstand or desk.
• Quality Manufacturing: Proudly Made in Taiwan.

Image: The BOXY Night Stand BLDC Watch Winder positioned on a nightstand, demonstrating its compact size and integration into a bedroom environment.

Image: The BOXY Night Stand BLDC Watch Winder displayed on a wooden surface, showcasing its elegant design suitable for various settings.

Image: A display of three BOXY Night Stand BLDC Watch Winders, illustrating the available color variations and consistent design.

Setup

Unpacking

Carefully remove the watch winder from its packaging. Ensure all components are present: the watch winder unit and the USB power cable.

Power Connection

The winder is powered via a USB cable. Connect the small end of the USB cable to the port located on the back of the winder. Connect the other end to a compatible USB power source (e.g., a USB wall adapter or a power bank) with an output voltage of 3.3V-5V.

Inserting Your Watch

Gently pull out the watch cushion from the winder. Secure your automatic watch onto the cushion, ensuring it is snug but not overly tight. Insert the cushion with the watch back into the winder, making sure it is seated correctly.

Image: The BOXY Night Stand BLDC Watch Winder with an automatic watch properly inserted, ready for operation on a bedside table.

Operating Instructions

The BOXY Night Stand BLDC Watch Winder offers customizable settings for winding direction and Turns Per Day (TPD) to suit the specific requirements of your automatic watch.

Direction Settings

Use the direction switch, located on the front panel of the winder, to select the desired winding mode:

• Clockwise (CW): The winder rotates exclusively in a clockwise direction.
• Counter-Clockwise (CCW): The winder rotates exclusively in a counter-clockwise direction.
• Bi-directional (CW+CCW): The winder alternates between clockwise and counter-clockwise rotations.

Turns Per Day (TPD) Settings

Use the TPD switch to select the appropriate number of turns per day for your watch. It is recommended to consult your watch manufacturer's specifications for the precise TPD requirement. Available settings are:

• 650 TPD
• 950 TPD
• 1250 TPD
• 2500 TPD

Starting and Stopping

Once the power is connected and your preferred settings are selected, the winder will automatically begin its operation cycle. To stop the winder, either disconnect the power cable or set the direction switch to the "OFF" position.

Image: A detailed front view of the BOXY Night Stand BLDC Watch Winder, highlighting the clearly labeled TPD and direction control switches for easy adjustment.

Maintenance

Cleaning

To maintain the appearance of your watch winder, wipe the exterior surfaces with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, chemical solvents, or harsh detergents, as these can damage the finish of the unit.

Storage

If the watch winder will not be used for an extended period, disconnect it from the power source. Store the unit in a clean, dry environment, away from direct sunlight and extreme temperatures.

Troubleshooting

Winder Not Operating

• Ensure the USB power cable is securely connected to both the winder and a functional power source.
• Verify that the power source provides the correct output voltage of 3.3V-5V.
• Check that the direction switch on the winder is not set to the "OFF" position.

Excessive Noise

• The BOXY BLDC motor is designed for quiet operation. If you notice unusual noise, ensure the winder is placed on a stable, flat surface.
• Check that the watch is properly secured on the cushion and is not rubbing against the winder's interior or any other part of the unit.

Watch Not Winding

• Confirm that your watch is an automatic movement that requires a winder. Manual-wind watches do not benefit from a winder.
• Verify that the selected TPD (Turns Per Day) and direction settings are appropriate for your specific watch model. Consult your watch manufacturer's manual for recommended winding specifications.
• Ensure the watch is fully seated on the cushion and the cushion is correctly inserted into the winder.

Specifications

Image: A side profile of the BOXY Night Stand BLDC Watch Winder, illustrating its height and depth measurements.

Warranty and Support

The BOXY Night Stand BLDC Watch Winder is backed by a comprehensive warranty:

• Winder Unit: 36-month warranty from the date of purchase.
• BLDC Motor: 60-month warranty from the date of purchase.

For warranty claims, technical assistance, or any product-related inquiries, please contact BOXY customer service through their official channels. Please retain your proof of purchase for warranty validation.

This product is manufactured in Taiwan, ensuring high standards of quality and craftsmanship.