1. Introduction
Thank you for purchasing the allen + roth Remy Flushmount Ceiling Fixture. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Remy flushmount fixture features a textured black frame with weathered wood accents and a mesh design, creating an industrial aesthetic. It is designed for indoor use and requires three candelabra base bulbs (E12), 60 watts maximum each, which are sold separately.
2. Safety Information
For your safety, always remember to:
- WARNING: Disconnect power at the main fuse or circuit breaker box before beginning installation or performing any maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- Do not exceed the maximum wattage specified for the bulbs (60 watts per bulb).
- Handle the fixture with care to avoid damage.
- This fixture is designed for indoor use only.
3. Package Contents
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.
- Flushmount Ceiling Fixture (1)
- Mounting Hardware (e.g., mounting bracket, screws, wire nuts) (1 set)
- Instruction Manual (1)
Note: Bulbs are not included. This fixture requires three candelabra base (E12) bulbs, 60 watts maximum each.
4. Setup and Installation
Follow these steps for proper installation of your flushmount ceiling fixture.
4.1 Tools Required (Not Included)
- Screwdriver (Phillips and/or Flathead)
- Wire Strippers
- Electrical Tape
- Ladder
4.2 Pre-Installation
- Turn off power at the circuit breaker or fuse box.
- Carefully remove the old fixture (if applicable).
- Unpack the new fixture and lay out all parts on a clean, flat surface.
4.3 Mounting the Fixture
- Attach the mounting bracket to the junction box in the ceiling using the provided screws. Ensure the bracket is securely fastened.
- Connect the electrical wires:
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box using a wire nut.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Wrap electrical tape around each wire nut connection for added security.
- Carefully tuck all wires into the junction box.
- Align the fixture base with the mounting bracket and secure it with the provided screws.
4.4 Bulb Installation
- Screw three candelabra base (E12) bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.
Image 1: The allen + roth Remy Flushmount Ceiling Fixture showing its dimensions of 14 inches length, 14 inches width, and 6 inches height. This image provides a visual reference for planning installation space.
5. Operating Instructions
- Once installation is complete, restore power at the circuit breaker or fuse box.
- Turn on the light switch connected to the fixture.
- This fixture is dimmable and compatible with standard wall dimmers (sold separately). Ensure you use dimmable bulbs if you intend to use a dimmer switch.
- While the product specifications mention "App" and "Remote Control" for control methods, these typically refer to optional smart home integrations or accessories not included with the basic fixture. The primary control is via a standard wall switch.
6. Maintenance
To maintain the appearance and functionality of your fixture:
- WARNING: Always turn off power to the fixture before cleaning.
- Wipe the fixture with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Periodically check all electrical connections for tightness.
7. Troubleshooting
If you experience issues with your fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims improperly. |
|
|
If the problem persists after trying these solutions, contact a qualified electrician or customer support.
8. Specifications
Image 2: The allen + roth Remy Flushmount Ceiling Fixture, showcasing its industrial design with a black frame, weathered wood accents, and mesh details.
| Brand | allen + roth |
| Model Name | Remy |
| Fixture Type | Flush Mount Ceiling Light |
| Color | Black |
| Material | Alloy Steel, Wood |
| Product Dimensions | 14"L x 14"W x 6"H |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Number of Light Sources | 3 |
| Bulb Base Type | Candelabra (E12) |
| Max Wattage per Bulb | 60 Watts |
| Dimmable | Yes (compatible with standard wall dimmer) |
| Item Weight | 8.43 pounds |
| UPC | 782042315716 |
9. Warranty and Support
Specific warranty information for this product may vary. Please refer to the documentation included with your purchase or contact the retailer or manufacturer directly for details regarding warranty coverage and customer support.
For technical assistance or inquiries, please contact allen + roth customer service through their official website or the retailer where the product was purchased.
