1. Product Overview
The OSRAM LEDriving SMART CANBUS is designed to ensure compatibility for LED upgrades in vehicles. It functions by bypassing the vehicle's defective bulb detection system when an H7 LED retrofit bulb is installed. This control unit facilitates easy installation and is suitable for most vehicles equipped with an automatic defective bulb detection system. An additional benefit of this device is the elimination of flickering in the vehicle's headlights.
Figure 1: OSRAM LEDriving SMART CANBUS module and its retail packaging.
2. Key Features
- Compatibility: Specifically designed for use with OSRAM NIGHT BREAKER H7-LED retrofit lamps.
- Error-Free Operation: Prevents the display of error messages on the vehicle's on-board computer that can be triggered by the installation of H7 LED bulbs.
Figure 2: Visual indicator for error-free functionality.
- Flicker-Free Performance: Eliminates flickering of H7 LED bulbs caused by vehicle electronics, ensuring a stable and aesthetically pleasing headlight beam. Suitable for 55W LED replacement bulbs.
Figure 3: Visual indicator for flicker-free headlight output.
- Enhanced Lighting: Allows users to fully benefit from the superior performance and efficiency of LED retrofit technology compared to traditional halogen lamps.
Figure 4: Example of vehicles utilizing LED headlights for improved night visibility.
3. Setup and Installation
The OSRAM LEDriving SMART CANBUS is designed for straightforward installation. It acts as an intermediary between the vehicle's wiring harness and the H7 LED retrofit bulb.
3.1 Important Considerations
- Vehicle Compatibility: The OSRAM NIGHT BREAKER H7-LED and associated accessories are only legally approved for specific vehicle models. Always verify that the product is approved for your vehicle before installation.
- Additional Components: Depending on your vehicle, an OSRAM LEDriving ADAPTER and/or the LEDriving SMART CANBUS may be required in addition to the H7 LED bulbs. Consult OSRAM's official compatibility list or your vehicle's manual.
- Professional Installation: If you are unsure about the installation process, it is recommended to seek assistance from a qualified automotive technician.
3.2 General Installation Steps (Consult specific vehicle instructions for details)
- Ensure the vehicle's ignition is off and the battery is disconnected for safety.
- Locate the existing H7 bulb in your vehicle's headlight assembly.
- Remove the traditional H7 bulb.
- Connect the OSRAM LEDriving SMART CANBUS module between the vehicle's wiring harness and the OSRAM NIGHT BREAKER H7-LED bulb. The module typically has connectors that match the bulb and the vehicle's socket.
Figure 5: Detailed view of the OSRAM LEDriving SMART CANBUS module and its connection points.
- Secure the SMART CANBUS module in a safe location within the engine bay, away from excessive heat or moving parts.
- Reconnect the vehicle battery and test the new LED headlights.
4. Operating Instructions
The OSRAM LEDriving SMART CANBUS operates automatically once correctly installed. Its primary function is to manage the electrical signals between the vehicle's system and the LED retrofit bulbs to prevent compatibility issues.
- The module simulates the electrical load of a traditional halogen bulb, preventing the vehicle's on-board computer from detecting a "bulb out" error.
- It stabilizes the power supply to the LED bulbs, eliminating the rapid on-off cycles (flickering) that can occur with some vehicle electrical systems.
- No user interaction is required after installation. The device works passively to ensure optimal performance of your LED headlights.
5. Maintenance
The OSRAM LEDriving SMART CANBUS is a sealed unit designed for maintenance-free operation. No regular servicing or cleaning is required for the module itself.
- Ensure the module and its connections remain securely fastened and free from physical damage.
- Periodically inspect the wiring for any signs of wear, fraying, or corrosion, especially if the vehicle operates in harsh environments.
- Keep the area around the module clean and free of debris to prevent overheating, although the unit is designed to be robust.
6. Troubleshooting
If you encounter issues after installing the OSRAM LEDriving SMART CANBUS, consider the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Error message on dashboard (e.g., "bulb out") | Incorrect installation or module not fully compatible with specific vehicle system. |
|
| LED headlights are flickering | Module not functioning correctly or vehicle's electrical system has unusual characteristics. |
|
| Headlights not turning on | Loose connection, faulty bulb, or power supply issue. |
|
7. Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | OSRAM |
| Brand | OSRAM |
| Model | OSRAM LEDriving SMART CANBUS LEDSC02-1 |
| Item Weight | 237 g |
| Product Dimensions (L x W x H) | 4.19 x 2.24 x 1.42 cm |
| Item Model Number | LEDSC02 |
| Manufacturer Part Number | LEDSC02 |
| Bulb Type | LED |
| Mirror Lighting Type | H7 |
| Voltage | 12 Volts |
| Wattage | 16 Watts (for the module, designed for 55W LED replacement bulbs) |
| Quantity in Package | 1 |
| Color | LEDSC02-1 |
| Fit Type | Vehicle Specific Fit |
Figure 6: OSRAM LEDriving SMART CANBUS product packaging.
8. Warranty and Support
OSRAM stands behind the quality of its products. The OSRAM LEDriving SMART CANBUS comes with a comprehensive 3-year warranty from the date of purchase.
Figure 7: Symbol indicating a 3-year warranty period.
This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact OSRAM customer service or visit the official OSRAM website. Keep your proof of purchase for warranty validation.
For the most up-to-date information, compatibility lists, and support resources, please refer to the official OSRAM website or contact their customer service department.
