KIWI AHC-5035 Aprilla Professional Hair Clipper User Manual

1. Introduction

Thank you for choosing the KIWI AHC-5035 Aprilla Professional Hair Clipper. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new hair clipper. Please read these instructions thoroughly before first use and retain them for future reference.

2. Important Safety Information

Always observe the following safety precautions to reduce the risk of electric shock, injury, or fire.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not use this appliance near bathtubs, showers, basins, or other vessels containing water.
• The appliance is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. However, always ensure the charging port is dry before connecting to power.
• Only use the charger supplied with the appliance.
• Do not operate the appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
• Keep the appliance away from heated surfaces.
• Do not attempt to repair the appliance yourself. Contact authorized service personnel for repairs.

3. Product Overview

3.1 Key Features

• IPX7 Waterproof: Fully washable for easy cleaning.
• Stainless Steel Blade: Durable and precise cutting.
• Fine Adjustment Function: Integrated dial for 0.5 / 1.0 / 1.5 / 2.0 mm cutting lengths.
• Long Runtime: Up to 120 minutes of operation on a full charge.
• Battery Powered: Cordless operation for convenience.

3.2 Components

Familiarize yourself with the parts of your hair clipper:

Image 1: Front view of the KIWI AHC-5035 Aprilla Professional Hair Clipper, showing the blade, power button, and cutting length adjustment dial.

Image 2: The KIWI AHC-5035 Aprilla Professional Hair Clipper shown with two guide combs and a representation of its lithium battery.

• Cutting Blade: Stainless steel blade for precise trimming.
• Power Button: Turns the clipper on and off.
• Cutting Length Adjustment Dial: Allows fine-tuning of cutting length from 0.5mm to 2.0mm.
• Guide Combs: Attachments for achieving various hair lengths beyond the dial's range.
• Charging Port: Located at the bottom of the clipper.

4. Setup

4.1 Initial Charging

1. Before first use, fully charge the hair clipper.
2. Ensure the clipper is switched off.
3. Connect the charging cable to the charging port on the clipper and plug the adapter into a suitable power outlet.
4. The charging indicator light will illuminate. Allow the clipper to charge for the recommended time (refer to specifications for full charge time) until the indicator shows a full charge.
5. A full charge provides approximately 120 minutes of cordless operation.

4.2 Attaching Guide Combs

1. Ensure the clipper is switched off before attaching or removing guide combs.
2. Select the desired guide comb for your preferred hair length.
3. Align the guide comb with the clipper blade and slide it firmly into place until it clicks.
4. To remove, gently push the comb upwards and away from the blade.

5. Operating Instructions

5.1 Turning On/Off

• To turn on the clipper, press the power button once.
• To turn off the clipper, press the power button again.

5.2 Adjusting Cutting Length

The KIWI AHC-5035 offers two methods for adjusting cutting length:

1. Fine Adjustment Dial: For precise short lengths, rotate the dial on the clipper body to select 0.5mm, 1.0mm, 1.5mm, or 2.0mm. This adjustment works directly on the blade without a comb.
2. Guide Combs: For longer hair lengths, attach one of the provided guide combs as described in Section 4.2. The guide combs will provide fixed cutting lengths.

5.3 Hair Cutting Tips

• For best results, use the clipper on clean, dry hair.
• Always start with a longer cutting length than desired to avoid cutting too short.
• Move the clipper slowly and steadily against the direction of hair growth.
• Overlap strokes to ensure an even cut.
• Regularly clear hair from the blade during use to maintain performance.

6. Maintenance and Cleaning

Proper maintenance ensures the longevity and performance of your hair clipper.

6.1 Cleaning After Each Use

1. Turn off the clipper and disconnect it from the power source if charging.
2. Remove any attached guide combs.
3. Use the cleaning brush (if provided) to brush away loose hairs from the blade and the clipper body.
4. Since the clipper is IPX7 waterproof, you can rinse the blade head and the entire clipper under running water. Ensure the charging port cover is securely closed before rinsing.
5. Allow the clipper to air dry completely before storing or recharging.

6.2 Blade Care

• Periodically apply a small drop of clipper oil (not included) to the blades to ensure smooth operation and prevent rust. Apply oil after cleaning and before storage.
• Never use abrasive cleaners or harsh chemicals on the clipper.

6.3 Storage

• Store the clipper in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep the clipper and its accessories out of reach of children.

7. Troubleshooting

If you encounter issues with your KIWI AHC-5035 hair clipper, refer to the table below for common problems and solutions.

8. Specifications

9. Warranty and Customer Support

For warranty information, service, or support, please refer to the warranty card included with your product or contact the KIWI customer service department. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the official KIWI website or contact their authorized service centers.