Medline Steel Bariatric Commode User Manual

1. Introduction

This manual provides essential information for the safe and effective use, assembly, maintenance, and troubleshooting of your Medline Steel Bariatric Commode.

The Medline Steel Bariatric Commode features an extra-wide seating area and a reinforced frame designed to accommodate larger patients. It includes a platform seat and backrest for additional comfort and support. The commode comes with a pail, lid, and splash guard. Its clip-on seat can be easily removed for cleaning.

2. Safety Information

Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury.

• Ensure all parts are securely fastened before each use.
• Do not exceed the maximum weight recommendation of 300 pounds.
• Use on a flat, stable surface to prevent tipping.
• Regularly inspect the commode for any signs of wear or damage. Discontinue use if damage is found.
• Keep out of reach of children when not in use by an adult.

3. Package Contents

Verify that all components are present before beginning assembly:

• 1 x Commode Frame
• 1 x Commode Seat with Lid
• 1 x Pail
• 1 x Splash Guard

4. Setup and Assembly

The Medline Steel Bariatric Commode is designed for easy assembly without the need for special tools.

1. Unpack all components from the box.
2. Extend the commode frame to its full upright position. Ensure all locking mechanisms (if present) are engaged.
3. Attach the commode seat and lid to the frame. The clip-on design allows for secure attachment.
4. Insert the pail into the designated holder beneath the seat.
5. Place the splash guard into the pail opening, if desired.
6. Adjust the height of the commode legs to the desired level by pressing the push pins and sliding the legs up or down. Ensure all four legs are set to the same height for stability.

5. Operation

The Medline Steel Bariatric Commode is designed for ease of use and patient comfort.

5.1. Using the Commode

• Ensure the commode is placed on a level, non-slip surface.
• Carefully transfer to the commode, using the reinforced frame for support.
• The platform seat and backrest provide additional comfort during use.
• After use, close the lid.

5.2. Adjusting Height

The commode's height can be adjusted to suit individual user needs:

1. Locate the push pins on each leg of the commode.
2. Press the push pin and slide the inner leg tube up or down to the desired height.
3. Ensure the push pin fully re-engages in the adjustment hole.
4. Repeat for all four legs, ensuring they are set to the same height for stability.

6. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and hygiene of your commode.

6.1. Daily Cleaning

• After each use, remove the pail and dispose of contents appropriately.
• The clip-on seat can be easily removed for thorough cleaning.
• Clean the pail, splash guard, and seat with a mild disinfectant solution and warm water.
• Rinse thoroughly and dry all components before reassembly.

6.2. Periodic Inspection

• Periodically check all nuts, bolts, and connections to ensure they are tight and secure.
• Inspect the frame for any signs of rust, cracks, or damage.
• Check the rubber tips on the legs for wear. Replace if worn to maintain stability.

7. Troubleshooting

This section addresses common issues you might encounter with your Medline Steel Bariatric Commode.

8. Specifications

Key specifications for the Medline Steel Bariatric Commode:

• Brand: Medline
• Model Number: G1-201LBX1
• Material: Steel
• Color: Gray
• Maximum Weight Recommendation: 300 Pounds
• Package Dimensions: 29.7 x 28.3 x 9.3 inches
• Item Weight: Approximately 21.5 Pounds
• Date First Available: October 6, 2020

9. Warranty and Support

For warranty information, product support, or to order replacement parts, please contact Medline customer service.

Manufacturer Contact Information:

Phone: 800-633-5463

For additional resources, visit the official Medline website or your point of purchase.