1. Introduction
This manual provides comprehensive instructions for the ElloGear Replacement Audio Cable with Volume Control. This cable is designed to replace the original audio cable for compatible gaming headsets, offering reliable audio transmission and convenient volume adjustment. Please read this manual thoroughly before use to ensure proper installation and operation.
Image 1.1: Overview of the ElloGear Replacement Audio Cable, showing both 3.5mm connectors and the in-line volume control module.
2. Compatibility
The ElloGear Replacement Audio Cable is compatible with the following gaming headsets and devices:
- Astro A10 Gaming Headset
- Astro A40 Gaming Headset
- Astro A40TR Gaming Headset
This cable is also compatible with various devices that utilize a standard 3.5mm audio jack, including:
- Xbox One consoles
- PlayStation 4 (PS4) consoles
- Personal Computers (PCs)
- Most smartphones and tablets
Image 2.1: Illustration showing various Astro A10 headsets, indicating compatibility with the replacement audio cable.
Image 2.2: Visual representation of compatible devices including a PlayStation 4 console, a smartphone, a laptop, and a gaming headset connected with the ElloGear cable.
3. Key Features
The ElloGear Replacement Audio Cable offers several features designed to enhance your gaming and audio experience:
- In-line Volume Control: Easily adjust audio levels directly from the cable using the integrated volume wheel.
- High-Quality Materials: Constructed from oxygen-free copper and equipped with gold-plated connectors for optimal signal transmission and clear 3D stereo sound.
- Durable Design: Features reinforced plastic at stress points to enhance longevity and prevent wear.
- Optimal Length: The cable measures 6.5 feet (2.0 meters), providing ample length for comfortable use.
Image 3.1: Detailed view highlighting the in-line volume control, reinforced plastic construction, and gold-plated 3.5mm jack of the cable.
4. Setup and Installation
Follow these steps to connect your ElloGear Replacement Audio Cable to your headset and device:
- Identify Connectors: The cable has two distinct 3.5mm connectors. One connector has a GRAY tip with four black stripes, and the other has a BLACK tip with three black stripes.
- Connect to Headset: Insert the 3.5mm connector with the GRAY tip (four black stripes) into the audio input port on your Astro Gaming Headset (A10, A40, or A40TR). Ensure it is fully seated.
- Connect to Device: Insert the 3.5mm connector with the BLACK tip (three black stripes) into the audio output port of your gaming console (Xbox One, PS4), PC, smartphone, or other compatible device.
- Verify Connection: Once both ends are connected, ensure the cable is not kinked or strained. Your headset should now be ready for use.
No additional drivers or software are required for installation. This is a plug-and-play accessory.
5. Operating the Volume Control
The ElloGear Replacement Audio Cable features an in-line volume control wheel for convenient audio adjustment during use.
- Adjusting Volume: Locate the small wheel on the in-line control module. Rotate the wheel upwards (towards the '+' symbol) to increase the volume. Rotate the wheel downwards (towards the '-' symbol) to decrease the volume.
- Mute Function: This cable provides volume control only. For microphone mute functionality, please refer to your headset's built-in controls or your device's audio settings.
Ensure your device's master volume is set to an appropriate level before making fine adjustments with the in-line control.
6. Care and Maintenance
To ensure the longevity and optimal performance of your ElloGear Replacement Audio Cable, follow these maintenance guidelines:
- Storage: When not in use, store the cable in a clean, dry place. Avoid tightly coiling the cable or bending it sharply, as this can damage internal wires.
- Cleaning: Use a soft, dry cloth to gently wipe the cable and connectors. Do not use harsh chemicals or abrasive materials.
- Handling: Always grasp the connector housing when plugging or unplugging the cable. Avoid pulling directly on the cable itself.
- Avoid Extreme Conditions: Do not expose the cable to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
7. Troubleshooting
If you encounter issues with your ElloGear Replacement Audio Cable, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| No audio or intermittent sound |
|
| Volume control not working |
|
| Poor audio quality (static, distortion) |
|
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | ElloGear |
| Model Number | 887276359946 |
| Cable Type | AUX (Auxiliary) |
| Connector Type | 3.5mm Jack (TRRS and TRS compatible) |
| Cable Length | 6.5 feet (2.0 meters) |
| Material | Oxygen-free copper, gold-plated connectors |
| Features | In-line volume control |
| Package Dimensions | 5.63 x 4.17 x 0.51 inches |
| Item Weight | 1.13 ounces |
Image 8.1: The ElloGear Replacement Audio Cable illustrating its total length of 6.5 feet (2 meters).
9. Warranty and Customer Support
ElloGear is committed to customer satisfaction. For any questions, concerns, or support needs regarding your replacement audio cable, please contact ElloGear customer service. Information regarding specific warranty terms can be found on the official ElloGear website or through your purchase documentation.
We strive to provide premium quality products and ensure your satisfaction. Do not hesitate to reach out for assistance.