1. Introduction
Thank you for choosing the XTU J10 Action Camera. This manual provides essential information for setting up, operating, and maintaining your device. Please read it thoroughly before use to ensure optimal performance and safety.
2. Product Overview
The XTU J10 is a versatile action camera designed to capture high-quality photos and videos in various environments. It features multiple recording modes, advanced settings, and robust construction for durability.
3. Safety Information
WARNING:
- Use only the specified charger for the 3.7V Li-ion Battery 1350mAh 4.995Wh.
- Batteries must be disposed of properly according to local regulations.
- Do not disassemble the battery.
- Avoid crushing, puncturing, or shorting external contacts of the battery.
- Batteries may explode if damaged or disposed of in fire or water.
4. Setup
4.1. Battery Installation and Charging
The XTU J10 Action Camera uses 3.7V Li-ion batteries. Ensure batteries are fully charged before first use.
Image: Two XTU Max 3.7V Li-ion 1350mAh batteries and a dual-slot charger (CH1, CH2). The charger allows simultaneous charging of two batteries.
- Insert the 3.7V Li-ion batteries into the dual charger slots (CH1 and CH2).
- Connect the charger to a power source using a compatible USB cable.
- The charging indicator will typically show red while charging and turn blue when fully charged.
- Ensure batteries are firmly pressed into their slots for proper contact.
4.2. Memory Card Installation
Insert a compatible microSD card (not included) into the camera's memory card slot. Ensure the card is inserted correctly until it clicks into place.
5. Operating Instructions
5.1. Power On/Off
- To power on: Press and hold the Power button.
- To power off: Press and hold the Power button again.
5.2. Mode Selection
Navigate through different modes (Video, Photo, Playback, Settings) using the Mode button.
5.3. Recording Video
In Video mode, press the Shutter/OK button to start recording. Press it again to stop.
5.4. Taking Photos
In Photo mode, press the Shutter/OK button to capture a still image.
5.5. Advanced Features
- Voice Control: The camera supports voice commands for hands-free operation, such as 'Record Video' to start recording.
- USB Powered: The camera can be powered via a USB cable, useful for extended recording sessions like time-lapses when connected to a power bank.
- Webcam Functionality: Connect the camera to a computer via USB to use it as a webcam.
- Dash Cam Mode: Features loop recording for use as a dash camera in a vehicle.
- Separate Photo/Video Settings: Adjust settings like white balance, exposure, and ISO independently for photo and video modes.
- Distortion Correction (LDC): This feature helps to correct the barrel distortion common with wide-angle lenses, providing a more natural image.
- Time Lapse: Capture sequences of images at set intervals (e.g., 1/2, 1, 2, 5, 10, 30, or 60 seconds) to create time-lapse videos.
- Still Photo Modes: Includes Burst Photo mode, Self-Timer mode, and a Slow Shutter setting for night photography. Photos can be captured in various resolutions (3, 5, 8, 12, 16, or 20 megapixels).
- Slow Motion: Record slow-motion video at various resolutions and frame rates, such as 720p at 120fps, 1080p at 120fps, or 720p at 240fps for ultra-slow motion effects.
6. Maintenance
- Keep the camera lens clean using a soft, lint-free cloth.
- Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
- Regularly back up your footage and format the memory card to maintain optimal performance.
- Ensure all ports and covers are securely closed when using the camera in wet or dusty conditions.
7. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Camera does not power on | Ensure the battery is fully charged and correctly inserted. Try a different battery if available. |
| Video/Photo quality is poor | Check lens cleanliness. Adjust resolution, exposure, and white balance settings. Ensure adequate lighting. |
| Memory card error | Ensure the memory card is compatible and correctly inserted. Try formatting the card (this will erase all data). Replace the card if the issue persists. |
| Camera freezes | Remove and reinsert the battery to reset the camera. Update firmware if available. |
8. Specifications
- Model: XTU J10
- Brand: XTU
- Battery Type: 3.7V Li-ion 1350mAh 4.995Wh
- Weight: 3.84 ounces
- Dimensions: 4.21 x 4.13 x 1.34 inches (Package Dimensions)
- Input Voltage: 240 Volts (for charger)
- Number of Ports: 1 (for charger, likely referring to input port)
- Features: Voice Control, USB Power, Webcam Mode, Dash Cam Mode, Distortion Correction, Time Lapse, Slow Motion, Various Photo Modes.
9. Warranty and Support
For warranty information and customer support, please refer to the official XTU website or contact your retailer. Keep your purchase receipt as proof of purchase.
