GRADO GT220

GRADO GT220 True Wireless Earbuds Instruction Manual

Model: GT220

Introduction

This manual provides detailed instructions for the GRADO GT220 True Wireless Earbuds. Please read this manual thoroughly before using your earbuds to ensure proper operation and to maximize your listening experience.

What's in the Box

Upon unboxing, verify that all the following items are present:

  • GT220 in-ear headphones (Left and Right)
  • Charging case
  • USB cable (USB-C to USB-A)
  • Multiple silicon tips (various sizes)
  • Owner's guide (this document)
GRADO GT220 Earbuds and Charging Case

Image: The GRADO GT220 True Wireless Earbuds resting inside their charging case.

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the GT220 earbuds and their charging case.

  • Using the USB-C Cable: Connect the provided USB-C to USB-A cable to the charging case and a compatible USB power source. The indicator lights on the case will show charging status.
  • Wireless Charging: The charging case supports wireless charging. Place the case on a compatible wireless charging pad. The indicator lights will confirm charging.
  • Battery Life: The earbuds provide approximately 6 hours of playback per charge. The charging case holds an additional 5 full charges, extending total listening time to about 30 hours.
GRADO GT220 Earbuds and Charging Case on a surface

Image: The GRADO GT220 earbuds and their charging case, illustrating their compact design.

2. Achieving a Proper Fit

A secure and comfortable fit is crucial for optimal sound quality and to prevent the earbuds from falling out.

  • Silicon Tips: Experiment with the multiple silicon tips provided to find the size that creates a good seal in your ear canal.
  • Twist to Lock Mechanism: Insert the earbud into your ear and gently twist it to secure it in place. This "twist to lock" design helps ensure stability during use.
Person wearing a GRADO GT220 earbud

Image: A person wearing a GRADO GT220 earbud, demonstrating the in-ear fit.

3. Bluetooth Pairing

To connect your GT220 earbuds to a device:

  1. Ensure the earbuds are charged and removed from the charging case. They will automatically enter pairing mode.
  2. On your device (smartphone, tablet, computer), go to the Bluetooth settings.
  3. Select "GRADO GT220" from the list of available devices.
  4. Once connected, you will hear an audio confirmation, and the indicator lights on the earbuds may change.

Operating Instructions

Touch Sensitive Controls

The GT220 earbuds feature touch-sensitive commands for easy control of music playback and calls. Specific tap patterns control various functions:

  • Play/Pause: Single tap on either earbud.
  • Next Track: Double tap on the right earbud.
  • Previous Track: Double tap on the left earbud.
  • Answer/End Call: Single tap on either earbud during an incoming call.
  • Reject Call: Press and hold either earbud during an incoming call.
  • Activate Voice Assistant: Triple tap on either earbud (e.g., Siri, Google Assistant).

Built-in Microphone

The integrated microphone allows for hands-free calls. Ensure the earbuds are properly seated for optimal microphone performance.

Audio Performance

The GT220 earbuds are equipped with 8mm polyethylene terephthalate full-range dynamic drivers, designed to deliver a frequency range of 20Hz-20000Hz. The high-density acoustically optimized polycarbonate construction contributes to the sound quality.

Maintenance

Proper care extends the life of your GRADO GT220 earbuds.

  • Cleaning: Regularly wipe the earbuds and charging case with a soft, dry cloth. For the silicon tips, remove them and clean with mild soap and water, then dry thoroughly before reattaching.
  • Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged.
  • Water Resistance: The earbuds are water resistant. Avoid submerging them in water or exposing them to heavy rain. Dry them completely if they get wet.
  • Charging Port: Keep the USB-C charging port free of dust and debris.

Troubleshooting

If you encounter issues with your GT220 earbuds, refer to the following common solutions:

ProblemSolution
Earbuds not pairing or disconnecting frequently.
  • Ensure both earbuds are charged.
  • Place earbuds back in the case, close it, then open it again to reset.
  • On your device, forget/unpair "GRADO GT220" from Bluetooth settings and attempt to pair again.
  • Ensure no other Bluetooth devices are interfering.
No sound or low volume.
  • Check the volume level on both your device and the earbuds.
  • Ensure earbuds are properly paired.
  • Clean any debris from the earbud nozzles and ensure silicon tips are correctly attached.
Earbuds do not fit securely or fall out.
  • Try different sizes of silicon tips to find the best seal.
  • Ensure you are using the "twist to lock" mechanism correctly when inserting the earbuds.
Microphone not working or poor call quality.
  • Ensure the earbuds are properly connected and selected as the audio input device on your phone.
  • Check for any obstructions around the microphone openings.
  • Test in a quieter environment to rule out excessive background noise.
Charging case not charging.
  • Verify the USB-C cable is securely connected to both the case and the power source.
  • Try a different USB-C cable or power adapter.
  • If using wireless charging, ensure the case is correctly positioned on the charging pad.

Specifications

FeatureDetail
BrandGRADO
Model NameGT220
ColorBlack
Ear PlacementIn Ear
Form FactorIn Ear
Impedance32 Ohms
Built-In MediaCharging Case, Cable
MaterialPolycarbonate (PC)
Control TypeTouch Control
Carrying Case Weight0.5 Pounds
Earbud Battery Life (per charge)6 Hours
Total Battery Life (with case)30 Hours
Noise ControlSound Isolation
Frequency Range20Hz-20000Hz
Audio Driver TypeDynamic Driver
Audio Driver Size8 Millimeters
Water Resistance LevelWater Resistant
Connectivity TechnologyBluetooth
Bluetooth Version5.0
UPC850929008560

Warranty and Support

For warranty information and technical support, please refer to the official GRADO website or contact their customer service directly. Keep your proof of purchase for any warranty claims.

Official Product Video

Video: An official overview of the Grado GT220 True Wireless Earbuds, showcasing their features and design.

© 2023 GRADO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.