NPAUTO UF242 90919-02247 ignition coils pack
NPAUTO Ignition Coil Pack Instruction Manual
Model: UF242 90919-02247 Ignition Coils Pack
Product Overview
This manual provides detailed instructions for the installation and maintenance of your NPAUTO Ignition Coil Pack. These coils are designed as direct replacements for specific Honda and Acura V6 models, ensuring optimal engine performance and reliability.
Image: A complete set of six NPAUTO ignition coils with their product packaging.
Compatibility
The NPAUTO Ignition Coil Pack (Model UF242 90919-02247) is compatible with various V6 Honda and Acura models. Please verify your vehicle's specific engine type and year against the list below to ensure proper fitment.
Image: Detailed compatibility chart for various Acura and Honda V6 models.
- 2001-2003 Acura CL 3.2L V6
- 2005-2008 Acura RL 3.5L V6
- 1999-2008 Acura TL 3.2L V6
- 2007-2008 Acura TL 3.5L V6
- 2000-2007 Honda Accord 3.0L V6
- 1999-2007 Honda Odyssey 3.5L V6
- 2008-2010 Honda Odyssey LX 3.5L V6 (ONLY fit for J35A6 Engine)
- 2008-2010 Honda Odyssey EX 3.5L V6 (ONLY fit for J35A6 Engine)
Note: For 2008-2010 Honda Odyssey 3.5L, this coil pack is only compatible with vehicles equipped with the J35A6 Engine.
Product Features and Benefits
NPAUTO ignition coils are engineered to address common issues associated with failing coils and enhance overall engine performance.
Image: Infographic detailing the benefits of NPAUTO ignition coils, including faster start-up and improved fuel efficiency.
- Faster Start-up: Contributes to quicker engine ignition.
- Solves Engine Shudder: Helps eliminate rough engine idle and misfires.
- Energy Efficient & Fuel Saving: Optimizes combustion for better fuel economy.
- Extensive Testing: Ensures product stability and long lifespan.
Construction and Quality Materials
The ignition coils are constructed with premium quality materials to ensure durability, stability, and resistance to operational stresses.
Image: Cross-section diagram of an ignition coil showing internal components like the spring, center iron core, circuit board, high voltage sheath, and connector.
- High Quality Resin: Provides insulation and protection.
- Upgraded High Voltage Sheath: Enhances electrical insulation and safety.
- OE Design Connector: Ensures a precise and secure fit with the vehicle's wiring harness.
Installation Guide
Pre-Installation Check
Before proceeding with installation, compare your new ignition coils with the old ones to confirm they have the same physical dimensions and connector type (3-pin connector).
Image: Close-up view of the 3-pin connector on the ignition coil, highlighting its design for plug-and-play installation.
Installation Steps
Follow these steps for proper installation of the new ignition coils:
Image: Visual guide demonstrating the five steps for installing new ignition coils in an engine bay.
- Turn Off the Engine: Ensure the engine is completely off and the ignition key is removed from the vehicle.
- Disconnect the Battery: Detach the negative terminal of the vehicle's battery to prevent electrical hazards.
- Remove Old Coils: Locate the existing ignition coils near the spark plugs. Unplug their electrical connectors, remove any securing bolts, and carefully pull out the old coils.
- Install New Coils: Insert the new NPAUTO ignition coils into their respective positions. Secure them with bolts and reconnect the electrical connectors firmly.
- Reconnect Battery: Reattach the negative terminal of the battery.
It is recommended to consult a professional mechanic if you are unsure about any step of the installation process.
Maintenance and Troubleshooting
Maintenance
NPAUTO ignition coils are designed for long-term reliability. Regular maintenance involves ensuring proper spark plug condition and checking for any loose connections or visible damage during routine vehicle inspections. Replace spark plugs according to your vehicle manufacturer's recommendations.
Troubleshooting Common Issues
| Symptom | Possible Cause | Solution |
|---|---|---|
| Engine Misfire / Rough Idle | Faulty ignition coil, worn spark plug, or wiring issue. | Verify coil connections. Inspect and replace spark plugs if necessary. If issue persists, test individual coils. |
| Decrease in Power / Poor Fuel Economy | One or more coils not firing efficiently. | Check for diagnostic trouble codes (DTCs). Replace affected ignition coils. |
| Check Engine Light (CEL) On | Engine misfire detected by vehicle's computer. | Retrieve DTCs using an OBD-II scanner. Address the specific code, which may indicate a coil issue. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | NPAUTO |
| Model | UF242 90919-02247 ignition coils pack |
| OEM Part Numbers | 30520P8EA01, 30520P8FA01, 30520RCAA02, 90919-02247, UF242, UF-242, C1221 |
| Installation Type | Bolt-On |
| Connector Gender | Male |
| Voltage | 12 Volts (DC) |
| Item Weight | 2.93 pounds (for the pack) |
| Package Dimensions | 8.43 x 7.28 x 3.39 inches |
| Country of Origin | China |
Warranty and Support
NPAUTO provides a 2-Year Warranty for this ignition coil pack. If you encounter any concerns or problems with the product, please do not hesitate to contact NPAUTO customer service for assistance.
For further support, you may visit the official NPAUTO store on Amazon: NPAUTO Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.