Introduction
Thank you for choosing the Sunbeam LED Power Failure Night Light. This versatile 3-in-1 device functions as an automatic night light, a power failure light, and a portable flashlight. It features color-changing LED illumination, auto-dimming capabilities, and integrated motion and photo sensors for enhanced convenience and safety. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.
Image: Three Sunbeam 3-in-1 LED Night Lights.
Product Features
- 3-in-1 Functionality: Automatic Night Light, Power Failure Light, and Portable Flashlight.
- Color Changing LED: Adjustable LED colors to suit various preferences and environments.
- Auto-Dimming: Light intensity adjusts automatically based on ambient light conditions.
- Motion Sensor: Automatically turns on when motion is detected in low light conditions.
- Photo Sensor: Activates the night light function only when the room is dark.
- Rechargeable Battery: Provides up to 5 hours of flashlight use and 16 hours as a power failure light.
Setup and Installation
- Unpacking: Carefully remove the night light from its packaging. Ensure all components are present.
- Initial Charge: Before first use, plug the night light into a standard electrical outlet (120V AC) for at least 12 hours to fully charge the internal battery. The light will function as a night light during charging.
- Placement: Choose an outlet in a location where ambient light is desired or where motion detection is beneficial. Avoid placing near heat sources or in direct sunlight.
- Orientation: Ensure the night light is securely plugged into the outlet. The light can be oriented vertically.
Image: Side view of the night light showing controls and plug.
Operating Instructions
Mode Selection Switch
The night light features a slide switch on its side to select operating modes:
- OFF: Turns the unit off.
- MOTION SENSOR - ON: Activates the motion sensor and photo sensor functions. The night light will turn on automatically in dark conditions when motion is detected.
Night Light Function
When set to 'MOTION SENSOR - ON', the night light will illuminate automatically in low light conditions. The integrated photo sensor detects ambient light, ensuring the light only activates when needed. The motion sensor will trigger the light when movement is detected within its range.
Image: Night light providing ambient blue illumination in a bedroom.
Color Changing Feature
To change the color of the LED light, press the power button located on the top of the unit while it is operating as a night light. Each press will cycle through a variety of colors. Hold the button to select a specific color, or continue pressing to cycle through the options.
Image: Illustration of the night light's color changing capabilities.
Power Failure Light Function
In the event of a power outage, the night light will automatically turn on, providing emergency illumination. This feature is active when the unit is plugged into an outlet and the switch is set to 'MOTION SENSOR - ON'. The internal rechargeable battery powers the light during outages for up to 16 hours.
Image: Night light functioning during a power outage.
Portable Flashlight Function
To use the unit as a portable flashlight, simply unplug it from the wall outlet. The light will automatically turn on. Press the power button on the top of the unit to cycle through different brightness settings or to turn the flashlight off. The flashlight provides up to 5 hours of continuous light on a full charge.
Image: Night light used as a portable flashlight.
Maintenance
- Cleaning: Unplug the unit from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Care: To maintain battery life, ensure the unit is regularly plugged into an outlet. If stored for extended periods, charge the unit every 3-6 months.
- Storage: Store the night light in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Night light does not turn on in the dark. | 1. Unit is not plugged in or not receiving power. 2. Switch is in 'OFF' position. 3. Room is not dark enough (photo sensor). 4. No motion detected (motion sensor). | 1. Ensure unit is securely plugged into a working outlet. 2. Slide switch to 'MOTION SENSOR - ON'. 3. Test in a darker environment. 4. Ensure motion is within sensor range. |
| Flashlight does not turn on when unplugged. | 1. Battery is depleted. 2. Unit is faulty. | 1. Plug the unit into an outlet to recharge for at least 12 hours. 2. Contact customer support if issue persists after charging. |
| Power failure light does not activate during an outage. | 1. Unit is not plugged in. 2. Battery is depleted. 3. Switch is in 'OFF' position. | 1. Ensure unit is plugged into a working outlet. 2. Allow unit to charge fully. 3. Slide switch to 'MOTION SENSOR - ON'. |
| Cannot change LED color. | Power button not pressed correctly. | Press the power button on the top of the unit firmly to cycle through colors. |
Specifications
- Model Number: 30310906
- Brand: Sunbeam
- Light Source Type: LED
- Finish Type: Polished
- Shade Material: Plastic
- Shade Color: Multicolor
- Switch Type: Automatic
- Special Feature: Instant On, Operating time 5 hours (flashlight), 16 hours (power failure light)
- Power Source: AC Plug-in with rechargeable battery
- Dimensions: Approximately 29.59 x 29.49 x 4.09 cm (Parcel Dimensions)
- Weight: Approximately 458 g
Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or visit the official Sunbeam website. Keep your purchase receipt as proof of purchase.
For further assistance, you may contact Sunbeam customer service through their official channels.
