Ledvance LED Floodlight GEN 3 (Model 239586) Instruction Manual

1. Introduction

Welcome to the instruction manual for your new Ledvance LED Floodlight GEN 3. This document provides essential information for the safe and efficient installation, operation, and maintenance of your floodlight. Please read this manual thoroughly before installation and retain it for future reference.

2. Safety Information

• General Safety: Always disconnect power before installation or maintenance. Ensure all electrical connections are secure and comply with local electrical codes. This product is designed for outdoor use and is rated IP65, indicating protection against dust and low-pressure water jets. Do not immerse in water.
• Electrical Safety: The floodlight operates on 100-277 VAC. Installation should be performed by a qualified electrician if you are unsure. Ensure proper grounding.
• Handling: Do not look directly into the LED light source when illuminated. Avoid touching the floodlight immediately after operation as it may be hot.

3. Package Contents

Verify that all items listed below are present in your package:

• 1x Ledvance LED Floodlight GEN 3
• 1x Mounting Bracket (pre-attached)
• 1x 1m Flexible Cable (H05RN-F, 3 x 1.0 mm²) (pre-installed)

4. Product Overview

Figure 4.1: Front view of the Ledvance LED Floodlight GEN 3, showcasing its compact black aluminum housing, integrated LED panel, and robust adjustable mounting bracket.

Figure 4.2: Technical drawing illustrating the physical dimensions of the floodlight: 131 mm in width, 122 mm in height (including bracket), and 36 mm in depth. These measurements are crucial for planning installation space.

Figure 4.3: The product packaging highlights essential features and certifications, including its 10W power consumption, 3000K warm white color temperature, 1100 lumens output, IP65 ingress protection, IK07 impact protection, and a 5-year warranty.

Figure 4.4: This diagram illustrates the symmetrical light distribution pattern of the floodlight, detailing the cone diameter and illuminance levels (in lux) at different distances from the light source. It indicates a 100° x 100° beam angle.

Figure 4.5: A polar diagram representing the light intensity distribution, showing how light is emitted in different directions. This symmetrical pattern confirms the 100° x 100° beam angle.

5. Setup and Installation

Follow these steps for proper installation:

1. Mounting: The floodlight comes with a pre-attached mounting bracket. Secure the bracket to a stable surface using appropriate fasteners (not included). The bracket allows for a 30° angle adjustment and a wide rotation area to direct the light as needed.
2. Electrical Connection: The floodlight is equipped with a 1-meter flexible cable (H05RN-F, 3 x 1.0 mm²). Connect this cable to your main power supply (100-277 VAC) ensuring correct polarity and proper grounding. It is recommended to use a waterproof junction box for outdoor connections to maintain the IP65 rating. If you are not confident with electrical wiring, consult a qualified electrician.
3. Positioning: Ensure the floodlight is positioned to illuminate the desired area without causing glare to pedestrians or drivers.

6. Operating Instructions

Once properly installed and connected to the power supply, the Ledvance LED Floodlight GEN 3 will illuminate when power is supplied. There are no user-adjustable controls on the unit itself. Operation is typically controlled via an external switch or timer connected to the power circuit.

7. Maintenance

To ensure optimal performance and longevity of your floodlight, follow these maintenance guidelines:

• Cleaning: Periodically clean the floodlight's diffuser and housing with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
• Inspection: Regularly inspect the cable and housing for any signs of damage. Ensure all mounting screws remain tight.
• Light Source: The LED light source is integrated and not user-replaceable. The product is designed for long-term, maintenance-free operation.

8. Troubleshooting

If you encounter issues with your floodlight, refer to the following common problems and solutions:

• No Light:
  • Check the power supply to the floodlight.
  • Ensure all electrical connections are secure.
  • Verify the external switch or timer is in the 'ON' position.
• Dim Light or Flickering:
  • Check for stable power supply.
  • Ensure connections are not loose.
  • If the issue persists, contact customer support.

For any issues not listed, please contact Ledvance customer support.

9. Specifications

10. Warranty and Support

This Ledvance product is covered by a manufacturer's warranty. Please refer to the product packaging or the official Ledvance website for specific warranty terms and conditions. For technical support or warranty claims, please contact Ledvance customer service through their official channels.