Edison Professional iRocker iR300B

1. Introduction

This manual provides essential information for the safe and efficient operation of your Edison Professional iRocker iR300B Portable Bluetooth Speaker. Please read these instructions thoroughly before using the device and retain them for future reference.

The iRocker iR300B is a portable and rechargeable Bluetooth speaker designed for audio playback from various sources, including Bluetooth-enabled devices, USB drives, and SD cards. Its rugged design and integrated carry handle enhance portability.

2. Safety Information

• Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not disassemble, repair, or modify the unit. This may void the warranty and pose a safety risk.
• Keep the speaker away from water or other liquids. This product is not waterproof.
• Use only the charging cable provided or a certified equivalent.
• Ensure proper ventilation when operating or charging the speaker.
• The speaker may emit loud voice prompts (e.g., "BLUETOOTH READY TO PAIR") at a fixed volume when powered on or changing modes. Be aware of this characteristic, especially in quiet environments.

3. Package Contents

Please check that the following items are included in your package:

• Edison Professional iRocker iR300B Portable Bluetooth Speaker
• USB Charging Cable
• Instruction Manual

4. Product Overview

Familiarize yourself with the speaker's components and controls.

Figure 1: Angled view of the iRocker iR300B speaker, showing the rugged design and integrated carry handle.

Figure 2: Front view of the iRocker iR300B speaker, highlighting the speaker grilles.

Figure 3: Rear view of the iRocker iR300B speaker, displaying the control panel with USB, SD card, and charging ports.

Control Panel (Refer to Figure 3)

• Power Button: Press and hold to turn the speaker ON/OFF.
• Mode Button: Press to switch between Bluetooth, USB, SD Card, and AUX modes.
• Play/Pause Button: Press to play or pause audio.
• Previous/Volume Down Button: Press to go to the previous track. Press and hold to decrease volume.
• Next/Volume Up Button: Press to go to the next track. Press and hold to increase volume.
• USB Port: For USB drive playback.
• SD Card Slot: For SD card playback.
• AUX Input: For connecting external audio devices via a 3.5mm audio cable (not included).
• Charging Port: For connecting the USB charging cable.
• LED Indicator: Displays charging status and Bluetooth pairing status.

5. Setup

5.1 Initial Charging

Before first use, fully charge the speaker. Connect the provided USB charging cable to the speaker's charging port and the other end to a USB power adapter (not included) or a computer's USB port. The LED indicator will show charging status and turn off or change color when fully charged. A full charge takes approximately 3 hours.

5.2 Powering On/Off

Press and hold the Power Button for approximately 3 seconds to turn the speaker ON or OFF. A voice prompt will indicate the power status.

6. Operating Instructions

6.1 Bluetooth Pairing

1. Turn on the iRocker iR300B speaker. It will automatically enter Bluetooth pairing mode, indicated by a voice prompt "BLUETOOTH READY TO PAIR" and a flashing LED indicator.
2. Enable Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
3. Search for available Bluetooth devices and select "iRocker iR300B" from the list.
4. Once paired, the speaker will confirm with a voice prompt and the LED indicator will stop flashing.
5. You can now play audio from your device through the speaker.

6.2 USB Playback

1. Insert a USB flash drive containing audio files into the USB port.
2. Press the Mode Button until the speaker enters USB mode. A voice prompt will confirm the mode change.
3. The speaker will automatically begin playing audio files from the USB drive.

6.3 SD Card Playback

1. Insert an SD card containing audio files into the SD card slot.
2. Press the Mode Button until the speaker enters SD card mode. A voice prompt will confirm the mode change.
3. The speaker will automatically begin playing audio files from the SD card.

6.4 AUX Input

1. Connect one end of a 3.5mm audio cable (not included) to the AUX input port on the speaker.
2. Connect the other end of the audio cable to the headphone jack or audio output of your external device.
3. Press the Mode Button until the speaker enters AUX mode. A voice prompt will confirm the mode change.
4. Play audio from your external device. The speaker will output the sound.

6.5 Volume Control

Press and hold the 'Previous/Volume Down' button to decrease the volume. Press and hold the 'Next/Volume Up' button to increase the volume.

7. Maintenance

• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Store the speaker in a cool, dry place when not in use.
• Avoid prolonged exposure to direct sunlight or extreme temperatures.

8. Troubleshooting

9. Specifications

10. Warranty and Support

The Edison Professional iRocker iR300B comes with a Limited Warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support or warranty inquiries, please contact Edison Professional customer service. Contact information can typically be found on the product packaging or the official Edison Professional website.