AccuPoint Active Stylus Instruction Manual

1.1 Initial Charging

Before first use, fully charge your AccuPoint Active Stylus. The stylus features a built-in battery that provides up to 12 hours of continuous use on a full charge. To charge, connect the included MicroUSB cable to the stylus's charging port and plug the other end into any standard USB power source (e.g., computer USB port, wall adapter).

Figure 1.1: Charging Indicator Lights. This image illustrates the different light indicators for power on (blue), charging (red), and full charge (green).

Figure 1.2: Convenient Charging. The stylus is shown connected to a MicroUSB cable, ready for charging from a laptop's USB port.

1.2 Powering On

The AccuPoint Active Stylus does not require any form of Bluetooth pairing with your device. Simply press the power button located on the stylus barrel to turn it on. An indicator light will illuminate, typically blue, to confirm it is active.

Figure 1.3: Stylus Overview. A close-up of the stylus showing the power button and indicator light.

2.1 Basic Operation

Once powered on, the AccuPoint Active Stylus emits small electronic pulses to interact with your device's touchscreen. Use the stylus as you would a traditional pen: draw, write, tap, and swipe directly on the screen. The ultra-accurate 2mm pen tip allows for precise input.

Figure 2.1: Interacting with Applications. The stylus is shown precisely selecting an application icon on a tablet screen.

Figure 2.2: Precision Tip in Use. This image highlights the fine tip of the stylus making contact with the screen for detailed input.

2.2 Important Considerations

• Palm Rejection: The AccuPoint Active Stylus does not support palm rejection. Avoid resting your palm on the screen while using the stylus to prevent unintended input.
• Pressure Sensitivity: This stylus does not support pressure sensitivity. Input will be consistent regardless of the pressure applied.
• Device Compatibility: This stylus is designed for use with capacitive touchscreens. While compatible with Teclast P20HD, it may work with other devices.

3.1 Cleaning

To clean the stylus, gently wipe the barrel and tip with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or immerse the stylus in water.

3.2 Storage

Store the stylus in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the stylus is turned off to conserve battery life.

4.1 Stylus Not Responding

• Check Power: Ensure the stylus is turned on. Press the power button and observe the indicator light.
• Charge Battery: If the indicator light does not illuminate or is dim, the battery may be low. Charge the stylus using the provided MicroUSB cable.
• Clean Tip: A dirty tip can affect responsiveness. Gently clean the stylus tip with a soft cloth.
• Device Compatibility: Confirm that your device has a capacitive touchscreen. While designed for Teclast P20HD, some older or specialized screens may not be fully compatible.

4.2 Inaccurate Input

• Screen Cleanliness: Ensure your device's screen is clean and free of smudges or debris.
• Stylus Tip Condition: Inspect the stylus tip for any damage or wear.

6.1 Warranty Information

Specific warranty details for the BoxWave AccuPoint Active Stylus are not provided in this manual. Please refer to the product packaging or visit the official BoxWave website for the most current warranty policy and registration information.

6.2 Technical Support

Limited third-party technical support for the compatible Teclast P20HD device is included with your purchase (up to 3 inquiries via electronic messaging). This support is not affiliated with or endorsed by Teclast.

For general inquiries or support regarding your BoxWave AccuPoint Active Stylus, please visit the BoxWave Corporation website or contact their customer service directly.