1. Introduction
This manual provides instructions for the safe and effective use of your Nerf DinoSquad Tricera-Blast Dart Blaster. Please read all instructions carefully before operating the blaster. This blaster is designed for users aged 8 years and older.
Figure 1.1: The Nerf DinoSquad Tricera-Blast Dart Blaster, showcasing its Triceratops-inspired design and included 12 Nerf Elite darts.
2. Safety Information
WARNING: TO AVOID EYE INJURY:
- Do not aim at eyes or face.
- Use of eyewear is recommended for players and people within range.
- Use only official NERF darts. Other darts may not meet safety standards. Do not modify darts or blaster.
Always ensure a clear play area and be aware of your surroundings when operating the blaster.
3. What's in the Box
Your Nerf DinoSquad Tricera-Blast Dart Blaster package should contain the following items:
- 1x Nerf DinoSquad Tricera-Blast Blaster
- 12x Nerf Elite Foam Darts
Figure 3.1: The Nerf DinoSquad Tricera-Blast Blaster as it appears in its retail packaging.
4. Setup
The Nerf DinoSquad Tricera-Blast Blaster requires minimal setup. No batteries are needed for operation.
4.1 Loading Darts into the Blaster
- Open the Barrel: Locate the front horn on the blaster's head. Push this horn downwards to cause the barrel to swing open, revealing the dart chambers.
Figure 4.1: A user inserting a Nerf Elite dart into one of the three open chambers of the blaster.
- Insert Darts: Load up to three (3) Nerf Elite darts into the exposed dart chambers. Ensure darts are fully seated.
- Close the Barrel: Swing the barrel back up until it clicks securely into place.
4.2 Storing Spare Darts
The blaster features onboard storage for up to 12 additional Nerf Elite darts on its stock. This allows for quick reloading during play.
Figure 4.2: Demonstrating how to store spare Nerf Elite darts on the blaster's stock for easy access.
5. Operating Instructions
Once darts are loaded, follow these steps to fire your Nerf DinoSquad Tricera-Blast Blaster:
- Prime the Blaster: Pull back the hammer located at the rear of the blaster until it locks into place. This action prepares the blaster to fire.
Figure 5.1: A user pulling back the hammer mechanism to prime the blaster for firing.
- Aim: Point the blaster safely away from eyes and faces, towards your intended target.
- Fire: Press the trigger to launch one (1) dart.
- Repeat: To fire another dart, repeat steps 1-3. The blaster fires one dart at a time from the loaded chambers.
Figure 5.2: A child demonstrating the proper grip and stance while holding the primed Nerf DinoSquad Tricera-Blast Blaster.
6. Maintenance
To ensure the longevity and optimal performance of your Nerf DinoSquad Tricera-Blast Blaster, follow these simple maintenance guidelines:
- Cleaning: Wipe the blaster with a clean, damp cloth to remove dust and debris. Do not submerge the blaster in water or use harsh chemicals.
- Dart Care: Use only official Nerf Elite darts. Inspect darts regularly for damage. Bent or torn darts can affect performance and potentially jam the blaster.
- Storage: Store the blaster in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dart does not fire or fires weakly. | Blaster not fully primed. Dart is damaged or not fully inserted. Non-official darts used. | Ensure hammer is pulled back until it clicks. Check dart for damage and proper insertion. Use only official Nerf Elite darts. |
| Barrel does not close properly. | Obstruction in the barrel mechanism. | Check for any foreign objects or damaged darts preventing the barrel from closing. Remove any obstructions carefully. |
If you encounter issues not listed here, please refer to the Warranty and Support section for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | F0803 |
| Product Dimensions | 32 x 3 x 10.73 inches |
| Item Weight | 0.019 ounces |
| Recommended Age | 8 years and up |
| Dart Capacity | 3 darts (barrel), 12 darts (onboard storage) |
| Manufacturer | Hasbro |
| Release Date | January 1, 2021 |
9. Warranty and Support
For warranty information or product support, please contact Hasbro customer service. Details can typically be found on the product packaging or the official Hasbro website.
Manufacturer: Hasbro
Website: shop.hasbro.com (Please note: This link is for general information and may not lead directly to support for this specific product. Refer to your product packaging for the most accurate support contact information.)
