HIKOKI C10RJWAZ Table Saw User Manual

1. Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your HIKOKI C10RJWAZ Table Saw. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage. Keep this manual in a safe place for future reference.

2. General Safety Instructions

WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

2.1 Work Area Safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2.2 Electrical Safety

• Power tool plugs must match the outlet. Never modify the plug in any way.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

2.3 Personal Safety

• Always wear eye protection. Use safety glasses, goggles, or a face shield.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
• Use appropriate safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection.

3. Product Overview and Components

The HIKOKI C10RJWAZ is a powerful 1500W table saw designed for precise cutting of wood. It features a robust construction with a large, extendable table surface for handling various workpiece sizes.

Figure 3.1: Overall view of the HIKOKI C10RJWAZ Table Saw, showcasing its robust stand and integrated wheels for portability.

Key Features:

• High-Performance Motor: 1500W motor for efficient cutting.
• Overload Protection: Protects the motor from damage during heavy use.
• Electric Brake: Stops the saw blade within 3 seconds for enhanced safety.
• Extendable Table Surface: Main table dimensions of 730 x 559 mm, extendable up to 880 x 709 mm, with extensions to the right (880 mm) and left (445 mm).
• Integrated Mobility: Robust universal low table with wheels for easy transport.
• Precise Adjustments: Easy adjustment of miter angle and cutting depth via large control knobs.
• Tool Storage: Convenient compartment for storing included tools and accessories.
• Dust Extraction: Adapter for external dust extraction (36 mm inner diameter).
• Stable Parallel Fence: Double-sided clamping for accurate longitudinal cuts.
• Soft Start: Integrated soft start function to protect fuses and the motor.

Figure 3.2: Detail of the extendable table and the precise parallel fence mechanism.

Figure 3.3: The dust extraction port, designed for connection to an external vacuum system.

4. Setup and Assembly

Your HIKOKI C10RJWAZ Table Saw comes partially assembled. Follow these steps to complete the setup.

4.1 Unpacking

1. Carefully remove all components from the packaging.
2. Verify that all included components are present: main saw unit, stand with wheels, parallel fence, miter gauge, saw blade, blade guard, anti-splinter protection, push stick, table enlargement, 2 Allen keys.
3. Inspect the saw for any shipping damage. Report any damage immediately to your dealer.

4.2 Stand Assembly

Attach the saw unit to the folding stand. Ensure all bolts are securely tightened. The stand is designed for stability and portability.

Figure 4.1: The robust wheels and handle facilitate easy movement of the table saw.

4.3 Blade Installation and Guard

Ensure the saw is unplugged before installing or changing the blade.

1. Raise the blade fully.
2. Remove the throat plate.
3. Use the provided wrenches to loosen the arbor nut and install the 255mm saw blade with a 30mm bore. Ensure the blade teeth are pointing towards the front of the saw.
4. Tighten the arbor nut securely.
5. Install the blade guard and anti-splinter protection.
6. Replace the throat plate.

Figure 4.2: Top view showing the saw table and various accessories, including the push stick and miter gauge.

5. Operating Instructions

Before operating, ensure you have read and understood all safety instructions.

5.1 Power Connection

• Connect the saw to a 240V power supply.
• The integrated soft start function will ensure a smooth power-up, protecting your electrical circuit.

5.2 Adjusting Cutting Depth and Angle

• Use the large control knobs to easily adjust the blade height for cutting depth (max 79mm at 90°, 57mm at 45°).
• Rotate the blade tilt mechanism to set the desired miter angle.

5.3 Using the Parallel Fence and Miter Gauge

• For rip cuts, position the parallel fence using the double-sided clamping mechanism for stability and precision.
• For cross-cuts and angled cuts, use the miter gauge.

Figure 5.1: A user demonstrating the table saw in operation, highlighting the importance of safety glasses and a connected dust extraction system.

5.4 Dust Extraction

Connect a suitable dust extraction system to the 36mm adapter to maintain a clean work environment and improve visibility.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your table saw. Always unplug the saw before performing any maintenance.

• Blade Cleaning: Regularly clean the saw blade to remove resin and sawdust buildup. A clean blade cuts more efficiently and reduces kickback risk.
• Table Cleaning: Keep the table surface clean and free of debris. Apply a thin coat of paste wax to the table to reduce friction and prevent rust.
• Dust Removal: Periodically clear sawdust from inside the saw cabinet.
• Inspection: Check all moving parts, fasteners, and electrical cords for wear or damage. Replace worn parts immediately.
• Lubrication: Lubricate height and bevel adjustment mechanisms as needed with a dry lubricant.

7. Troubleshooting

This section provides solutions to common issues you might encounter.

8. Specifications

9. Storage and Transport

The HIKOKI C10RJWAZ is designed for easy storage and transport.

• Folding Mechanism: The stand can be folded for compact storage.
• Wheels: Utilize the integrated wheels and handle to easily move the saw around your workshop or job site.
• Secure Storage: When not in use, store the saw in a dry, secure location, out of reach of children.

Figure 9.1: The table saw folded into a compact, upright position, ready for storage or transport.

Figure 9.2: A user easily moving the table saw across a paved surface, demonstrating its portability.

10. Warranty and Support

Information regarding the product warranty and customer support was not provided in the product details. For warranty claims, technical support, or spare parts, please contact your authorized HIKOKI dealer or visit the official HIKOKI website for the most up-to-date information.

Always ensure to use genuine HIKOKI spare parts for repairs to maintain product performance and safety.