Artist hand Barber Chair Instruction Manual

1. Introduction

Thank you for choosing the Artist hand Barber Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new barber chair. Please read these instructions thoroughly before use and retain them for future reference.

2. Safety Information

WARNING: Do not exceed the maximum weight capacity of 400 lbs. Always use the chair in the intended manner and follow the assembly instructions carefully. This product is intended for indoor use only.

• Ensure all components are securely fastened before use.
• Keep hands and feet clear of moving parts during adjustment.
• Do not allow children to play on or around the chair unsupervised.
• Place the chair on a stable, level surface.

3. Product Overview

The Artist hand Barber Chair is designed for comfort and functionality in professional salon, spa, or tattoo shop environments. Key features include adjustable height, reclining backrest, 360-degree swivel, and a comfortable, durable design.

Product Dimensions

Figure 1: Artist hand Barber Chair Dimensions

The chair features a wide seat and high-density sponge padding for maximum comfort, covered in skin-friendly, wear-resistant, and easy-to-clean PVC artificial leather. The heavy-duty metal base with a galvanized, rust-resistant surface ensures stability and longevity, with rubber pads to protect flooring.

4. Assembly Instructions

The salon chair is designed for easy installation. Detailed installation steps are included in the manual, and all accessories are provided in the carton. Assembly can typically be completed within 15 minutes.

1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the packing list are present.
2. Attach Base: Secure the chair's main body to the hydraulic pump and base assembly.
3. Install Armrests: Fasten the armrests to the chair frame using the provided hardware.
4. Assemble Footrest: Attach the footrest to the designated points on the chair.
5. Insert Headrest: Slide the adjustable headrest into its slot at the top of the backrest.
6. Final Check: Ensure all screws and bolts are tightened and the chair is stable before use.

5. Operating Instructions

5.1. Height Adjustment

Figure 2: Height Adjustment Mechanism

To adjust the chair's height, locate the hydraulic lever, typically on the side of the seat. Pressing the lever down while seated will lower the chair. To raise the chair, stand up and press the lever down; the chair will rise automatically. Release the lever to lock the height.

5.2. Reclining Function

Figure 3: Reclining Backrest

The backrest can recline up to 135 degrees. To recline, locate the recline lever (usually on the side, opposite the hydraulic lever). Pull the lever and lean back to achieve the desired angle. Release the lever to lock the backrest in position. To return to an upright position, pull the lever and lean forward.

5.3. 360-Degree Swivel

Figure 4: 360-Degree Swivel and Lock

The chair features a 360-degree swivel for easy maneuverability. To rotate the chair, simply push or pull the seat in the desired direction. Some models may include a locking mechanism on the base to prevent unwanted rotation; consult your specific model for details.

5.4. Adjustable Headrest

Figure 5: Adjustable Headrest

The headrest can be adjusted vertically to accommodate clients of different heights. Simply pull the headrest up or push it down to the desired position. It will lock into place automatically.

5.5. Comfort Footrest

Figure 6: Comfort Footrest

The integrated footrest provides additional support for clients. It is designed to allow for easy rotation of the chair while providing a stable resting place for feet.

6. Maintenance

• Cleaning: Wipe the PVC artificial leather with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners that may damage the material.
• Base Care: The galvanized metal base is rust-resistant. Clean with a soft, dry cloth. Avoid prolonged exposure to moisture.
• Lubrication: Periodically check and lubricate moving parts of the hydraulic system and reclining mechanism as needed to ensure smooth operation.
• Fastener Check: Regularly inspect all screws and bolts to ensure they are tight. Re-tighten if necessary to maintain stability and safety.

7. Troubleshooting

• Chair not adjusting height: Check the hydraulic lever for proper engagement. Ensure there is no obstruction in the hydraulic cylinder. If the issue persists, contact customer support.
• Chair wobbles: Verify that all assembly fasteners are securely tightened. Ensure the chair is placed on a flat, stable surface.
• Reclining mechanism stiff: Apply a small amount of lubricant to the pivot points of the reclining mechanism. Ensure the lever is fully engaged.

8. Specifications

9. Warranty & Support

For any problems encountered during assembly or use, please feel free to contact the seller or manufacturer directly. They will respond immediately to assist you with any issues or warranty claims.