Nostalgia Electric Shave Ice Maker (Model: Electric) - Instruction Manual

1. Introduction

Welcome to the world of homemade icy treats! The Nostalgia Electric Shave Ice Maker is designed for effortless use, transforming regular ice cubes into flavor-absorbing snow in seconds. This manual provides essential information for the safe and efficient operation of your new appliance. Please read it thoroughly before first use and retain it for future reference.

This compact tabletop machine is perfect for creating a wide range of refreshing frozen treats like snow cones, Hawaiian shaved ice, daiquiris, and slushies. It includes 2 ice mold bowls and 1 reusable plastic cone to get you started.

2. Important Safety Information

To ensure safe operation and prevent damage, please adhere to the following safety guidelines:

• Electrical Safety: Always plug the appliance into a grounded outlet. Do not immerse the cord, plug, or any part of the main unit in water or other liquids.
• Sharp Blades: The stainless steel cutting blades are extremely sharp. Exercise extreme caution when handling, assembling, or cleaning the blade area. Keep fingers and utensils away from the blades during operation.
• Supervision: Close supervision is necessary when any appliance is used by or near children.
• Secure Lid: Ensure the lid is securely in place before operating the machine. The safety switch prevents operation if the lid is not properly closed.
• Proper Use: Use only ice cubes or frozen ice pucks made from the provided molds. Do not use frozen fruits or other hard items, as this may damage the blades or motor.
• Unplug When Not in Use: Always unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Avoid Damaged Cords: Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.

3. Parts and Features

Familiarize yourself with the components of your Nostalgia Electric Shave Ice Maker:

• Main Unit: The base and housing of the machine.
• Shaving Chamber: The upper section where ice is placed for shaving.
• Lid with Push Button: Covers the shaving chamber and activates the motor when pressed down.
• Stainless Steel Cutting Blades: Located inside the shaving chamber, designed for efficient ice shaving.
• Ice Mold Bowls (x2): Plastic containers for freezing water into ice pucks.
• Reusable Plastic Cone (x1): For serving shaved ice.
• Drip Tray/Base: Collects any melted ice or spills.

Figure 1: Nostalgia Electric Shave Ice Maker with a freshly made blue shaved ice cone and a bowl of rainbow shaved ice.

Figure 2: Product dimensions showing the machine is approximately 14.5 inches tall, 7.5 inches deep, and 7 inches wide.

4. Setup

Before first use, wash all removable parts (ice molds, reusable cone, lid) in warm, soapy water. Rinse thoroughly and dry. Wipe the main unit with a damp cloth.

Preparing Ice:

• Using Ice Molds: Fill the provided ice mold bowls with water (or a flavored beverage for pre-flavored ice pucks) and freeze for 8-12 hours until solid. This creates ideal ice pucks for the finest shave.
• Using Regular Ice Cubes: Standard ice cubes from your freezer can also be used. Ensure they are not too large to fit comfortably into the shaving chamber.

5. Operating Instructions

Follow these steps to create delicious shaved ice:

1. Place the reusable plastic cone (or your preferred serving bowl/cup) on the drip tray beneath the ice chute.
2. Lift the lid from the shaving chamber.
3. If using an ice puck, invert it from the mold and place it directly onto the cutting blades in the shaving chamber. If using regular ice cubes, add a handful of cubes into the shaving chamber.
4. Securely place the lid back onto the shaving chamber. Ensure it clicks into place to activate the safety switch.
5. Plug the appliance into a standard electrical outlet.
6. Press down firmly on the top push button of the lid. The motor will activate, and ice will begin to shave into your serving container.
7. Continue pressing until the desired amount of shaved ice is collected. Release the button to stop operation.
8. Unplug the appliance. Remove your shaved ice and add your favorite syrups or toppings.

Figure 3: Visual guide showing the three easy steps: 1. Add ice to shaving chamber, 2. Place lid and hold down to start, 3. Add your favorite flavor & enjoy!

Figure 4: Close-up view of an ice disk being placed into the shaving chamber, highlighting the stainless steel blade.

6. Maintenance and Cleaning

Regular cleaning ensures the longevity and hygiene of your appliance.

• Always Unplug: Before cleaning, always ensure the appliance is unplugged from the electrical outlet.
• Disassembly: Carefully remove the lid and any remaining ice from the shaving chamber.
• Hand Wash: Wash the lid, ice molds, and reusable plastic cone in warm, soapy water. Rinse thoroughly and dry completely.
• Wipe Main Unit: Wipe the exterior of the main unit and the inside of the shaving chamber (avoiding direct contact with blades) with a damp cloth. Do not immerse the main unit in water.
• Dry Thoroughly: Ensure all parts are completely dry before reassembling or storing.

7. Troubleshooting

If your shave ice maker encounters issues, try these common solutions:

• Machine Does Not Start:
  • Ensure the appliance is securely plugged into a working electrical outlet.
  • Verify that the lid is properly aligned and securely closed. The safety switch prevents operation if the lid is not correctly positioned.
  • Confirm that the push button on the lid is being pressed down firmly during operation.
• Ice Not Shaving Properly:
  • Check if the ice is too large or too hard. Use smaller ice cubes or allow ice pucks to temper slightly if they are excessively frozen.
  • Ensure the ice is making proper contact with the cutting blades.
• Excessive Noise:
  • Some noise is normal during operation. If the noise is unusually loud or grinding, check for any obstructions in the shaving chamber.

8. Specifications

9. Warranty and Support

For warranty information or customer support regarding your Nostalgia Electric Shave Ice Maker, please contact Nostalgia customer service directly. Refer to the product packaging or the official Nostalgia website for the most up-to-date contact details and warranty terms.