1. Introduction
This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your HAUSHOF Cordless Hot Glue Gun, model HH20006AE. Please read this manual thoroughly before first use and retain it for future reference.
Image: The HAUSHOF Cordless Hot Glue Gun, model HH20006AE, shown with its detachable battery base and a bundle of full-size glue sticks. The gun is white with teal accents, featuring a comfortable grip and a precision nozzle.
2. Important Safety Instructions
Always observe the following safety precautions to prevent injury or damage to the product.
- Keep the glue gun away from children.
- Do not touch the nozzle or melted glue, as they reach high temperatures and can cause severe burns.
- Use only recommended glue sticks.
- Do not operate the glue gun in damp or wet conditions.
- Ensure proper ventilation when using the glue gun.
- Never pull out a melting glue stick from the gun after use; allow it to cool and remain inside for the next use.
- Charge the battery in a power-off state for optimal battery life and safety.
- Do not use the glue gun while it is charging.
- Disconnect the charger once the battery is fully charged.
Image: A close-up view highlighting the safety features of the HAUSHOF Cordless Hot Glue Gun, including the protective cover over the nozzle, the insulated nozzle itself, the anti-slip grip, the spill-proof design, and the safe trigger mechanism.
3. Product Overview
The HAUSHOF Cordless Hot Glue Gun HH20006AE is a versatile tool designed for various DIY projects, arts, crafts, quick repairs, and home use. It features a cordless design for portability and a fast preheating system.
Key Features
- Cordless design with a built-in standing base.
- Fast preheating: 2-3 minutes warm-up time.
- 60W power for efficient melting.
- Uses full-size glue sticks (0.44" x 5-1/8").
- Protective cover and insulated nozzle for safety.
- Safe trigger for controlled glue flow.
- Drip-free nozzle to prevent spills.
- Powered by a 12V Lithium-Ion battery.
Image: The HAUSHOF Cordless Hot Glue Gun with text indicating "2-3 Minutes Fast Preheat," emphasizing its quick readiness for use.
Image: A diagram illustrating the dimensions of the full-size glue sticks (0.44" diameter, 5-1/8" length) and highlighting their super adhesive, eco-friendly, odor-free, and impurity-free qualities.
4. Setup
4.1. Charging the Battery
- Ensure the glue gun is powered off.
- Connect the charger to the battery pack.
- Plug the charger into a power outlet.
- Charge the 2.2Ah lithium-ion battery for approximately 1-1.5 hours. The indicator light will show charging status (refer to charger instructions for specific light indications).
- Unplug the charger once charging is complete.
Important: The glue gun will not heat when charging. Always charge the battery in the power-off state and use it without charging for optimal performance and battery longevity.
Image: A four-panel instructional image. Panel 1 shows the glue gun's battery being charged by connecting it to the AC adapter.
5. Operating Instructions
5.1. Inserting a Glue Stick
- Ensure the glue gun is off and cool.
- Insert a full-size glue stick (0.44" diameter) into the opening at the back of the glue gun. Push it firmly until it stops.
Image: A four-panel instructional image. Panel 2 shows a hand inserting a glue stick into the back of the HAUSHOF Cordless Hot Glue Gun.
5.2. Powering On and Preheating
- Press and hold the power button for 3 seconds to turn on the glue gun. The indicator light will illuminate.
- Allow the glue gun to preheat for 2-3 minutes. The indicator light may change color or stop blinking when ready (refer to specific model indications).
Image: A four-panel instructional image. Panel 3 shows a finger pressing and holding the power button on the base of the HAUSHOF Cordless Hot Glue Gun to turn it on.
5.3. Applying Glue
- Once preheated, gently squeeze the trigger to dispense melted glue.
- Apply glue to the desired surface.
- Release the trigger to stop the glue flow.
- For continuous application, gently push the glue stick further into the gun as needed.
Image: A four-panel instructional image. Panel 4 shows the glue gun preheating for 2-3 minutes and then being used to apply glue, with a red 'X' indicating not to pull out the glue stick.
5.4. Powering Off
Press and hold the power button for 3 seconds to turn off the glue gun. Allow it to cool completely before storing.
Attention: Do not pull out the melting glue stick from the glue gun after finishing work. Keep it inside for next use to prevent damage and ensure proper function.
6. Maintenance
- Cleaning: Ensure the glue gun is completely cool before cleaning. Wipe the exterior with a clean, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the glue gun in a dry, cool place, out of reach of children. Ensure no glue sticks are partially pulled out.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge when the power is low. If storing for extended periods, charge the battery to approximately 50% every 3-6 months.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Glue gun does not heat up. | Battery not charged. | Charge the battery fully. |
| Glue gun does not heat up. | Power button not held long enough. | Press and hold the power button for 3 seconds. |
| Glue gun does not heat up. | Using while charging. | Disconnect charger; use only when not charging. |
| Glue not dispensing. | Not preheated sufficiently. | Allow 2-3 minutes for preheating. |
| Glue not dispensing. | Glue stick not fully inserted. | Push glue stick firmly into the gun. |
| Glue drips excessively. | Nozzle not fully heated or faulty. | Ensure full preheating. If problem persists, contact support. |
| Battery indicator light issues. | Refer to charger/battery specific instructions. | Ensure proper charging sequence (power off, then charge). |
8. Specifications
| Feature | Detail |
|---|---|
| Model | HH20006AE |
| Brand | HAUSHOF |
| Power Supply | 12V DC |
| Wattage | 60 Watts |
| Battery Type | Lithium-Ion |
| Battery Capacity | 2.2Ah |
| Charging Time | 1-1.5 Hours |
| Battery Life (Operating) | Approximately 50 Minutes |
| Preheating Time | 2-3 Minutes |
| Glue Stick Diameter | 0.44 inches (Full Size) |
| Glue Stick Length | 5-1/8 inches |
| Item Weight | 916 g |
| Dimensions (Approx.) | 7" x 6-7/8" x 2-1/2" (Gun) |
| Charger Cable Length | 40" |
| Compatible Materials | DIY, Paper, Glass, Fabric, Packing, Toys |
Image: A detailed infographic displaying the technical specifications of the HAUSHOF Cordless Hot Glue Gun, including power supply, battery type, capacity, charging time, battery life, wattage, and dimensions.
Image: An image showcasing various applications and compatible materials for the glue gun, such as DIY projects, paper, glass, fabric, packing, and toys.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact HAUSHOF customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Manufacturer: HAUSHOF
Model Number: HH20006AE
