Kask WHP00001.203
Kask SC3 Orange Ear Defenders User Manual
Model: WHP00001.203
1. Introduction
The Kask SC3 Orange Ear Defenders are designed to provide effective hearing protection in noisy environments. These ear defenders are specifically engineered for seamless integration with KASK Super Plasma and Zenith helmets, offering a secure and comfortable fit. They meet ANSI S3.19 / EN 352 / CSA A standards and provide up to 27dB of noise reduction. This manual will guide you through the proper installation, use, and maintenance of your ear defenders to ensure maximum safety and longevity.
2. Safety Information
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always inspect ear defenders for damage before each use. Do not use if damaged.
- Ensure a proper seal around the ears for effective noise reduction.
- Do not modify the ear defenders in any way.
- Store in a clean, dry place away from direct sunlight and extreme temperatures.
- These ear defenders are intended for hearing protection only and should not be used for other purposes.
3. Components
The Kask SC3 Orange Ear Defenders consist of the following primary components:
- Ear Cups: The main protective shells that cover the ears, containing sound-absorbing material.
- Cushions: Soft, padded rings around the ear cups that create a seal against the head.
- Attachment Arms: Adjustable arms that connect the ear cups to the helmet mounting points.
- Helmet Mount Adapters: Specific connectors designed to fit KASK Super Plasma and Zenith helmets, and other helmets accepting Peltor/3M style ear muffs.

Figure 3.1: Inside view of the ear defender, highlighting the cushion and internal structure.
4. Setup
Follow these steps to properly attach the Kask SC3 Ear Defenders to your compatible helmet:
- Identify Mounting Slots: Locate the accessory mounting slots on the sides of your KASK Super Plasma or Zenith helmet. These are typically near the temples.
- Align Adapters: Take one ear defender and align its helmet mount adapter with the corresponding slot on the helmet. Ensure the adapter is oriented correctly for a secure fit.
- Insert and Secure: Firmly push the adapter into the helmet's mounting slot until it clicks into place. You should hear and feel a positive engagement.
- Repeat for Second Side: Attach the second ear defender to the opposite side of the helmet following the same procedure.
- Verify Attachment: Gently pull on each ear defender to ensure it is securely fastened and does not easily detach.

Figure 4.1: Side view illustrating the helmet attachment point.

Figure 4.2: Kask SC3 Ear Defenders ready for attachment.
5. Operating
To achieve optimal hearing protection, ensure the ear defenders are worn correctly:
- Position Ear Cups: Once attached to the helmet, pivot the ear cups downwards so they fully cover your ears.
- Adjust for Fit: The attachment arms allow for vertical adjustment. Slide the ear cups up or down until they comfortably enclose your entire ear and create a firm seal against your head. There should be no gaps around the ear cups.
- Check Seal: If you wear glasses, ensure the temples of your glasses do not break the seal of the ear cushions. Adjust as necessary.
- Remove: To remove, pivot the ear cups upwards and away from your ears. They can remain attached to the helmet for storage or be detached completely if needed.
6. Maintenance
Proper maintenance will extend the life of your Kask SC3 Ear Defenders:
- Cleaning: Clean the ear cups and cushions regularly with a mild soap and water solution. Use a soft cloth. Do not immerse the ear defenders in water.
- Drying: Allow the ear defenders to air dry completely before storage. Do not use heat to dry them.
- Inspection: Periodically inspect the ear cushions for cracks, hardening, or other signs of wear. Worn cushions can compromise the seal and reduce effectiveness. Replace cushions if necessary.
- Storage: Store the ear defenders in a clean, dry environment, away from direct sunlight, chemicals, and extreme temperatures.
7. Troubleshooting
If you encounter issues with your ear defenders, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor noise reduction | Improper fit; Worn cushions; Hair/glasses breaking seal | Adjust ear cups for snug fit; Replace cushions; Adjust hair/glasses |
| Ear defenders feel loose on helmet | Not fully engaged in mounting slot; Damaged adapter | Push firmly until click; Inspect adapter for damage, replace if necessary |
| Discomfort during use | Incorrect adjustment; Prolonged use | Re-adjust position; Take breaks from wearing |
8. Specifications
| Attribute | Detail |
|---|---|
| Model Number | WHP00001.203 |
| Manufacturer | Kask |
| Color | Orange |
| Material | Polymer |
| Item Weight | 14.4 ounces |
| Product Dimensions | 11.02 x 11.02 x 9.06 inches |
| Noise Reduction Rating (NRR) | Up to 27dB |
| Standards Met | ANSI S3.19 / EN 352 / CSA A |
| Compatibility | KASK Super Plasma & Zenith helmets, and helmets accepting Peltor/3M style ear muffs |
9. Warranty and Support
For information regarding warranty coverage and customer support for your Kask SC3 Orange Ear Defenders, please refer to the official Kask website or contact your authorized Kask dealer. Keep your proof of purchase for any warranty claims.
Kask Official Website: www.kask.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.




