MADER SAURIUM 48523 2-in-1 Manual and Battery Pressure Sprayer (16L) User Manual

1. Product Overview

The MADER SAURIUM 48523 is a versatile 16-liter pressure sprayer designed for various applications. It offers dual operation modes: a manual lever pump and an automatic battery-powered pump, providing flexibility and efficiency for your spraying needs. This sprayer includes three different nozzles for diverse spraying patterns.

Key Features:

• 16-liter capacity tank.
• Dual operation: Manual pump or 12V - 8A battery-powered pump.
• Battery autonomy: 6 to 8 hours.
• Extendable stainless steel lance.
• Includes 3 different nozzles.

2. Safety Instructions

WARNING: Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Keep the product away from heat sources and open flames.
• Do not use the sprayer while it is charging.
• Keep out of reach of children and pets.
• In case of contact with skin or eyes, rinse thoroughly with water and consult a doctor if necessary.
• Do not mix different chemical products in the tank.
• Dispose of the product and its components safely according to local regulations.
• Always wear appropriate personal protective equipment (PPE) such as gloves, eye protection, and a mask when handling chemicals.
• Ensure the area is well-ventilated when spraying.
• Do not spray flammable liquids or strong acids/alkalis.

3. Package Contents

Verify that all components are present and undamaged upon unpacking.

Figure 1: Included Components. This image displays the main components of the sprayer kit: the extendable stainless steel lance, the battery charger, a filter basket, and three different spray nozzles.

• 1 x 16L Sprayer Tank with integrated battery and pump
• 1 x Extendable Stainless Steel Lance
• 1 x Battery Charger (12V)
• 3 x Assorted Nozzles
• 1 x Filter Basket
• 1 x Shoulder Strap Assembly

4. Setup

4.1. Charging the Battery

1. Locate the charging port on the sprayer unit.
2. Connect the charger to the charging port.
3. Plug the charger into a standard electrical outlet.
4. Allow the battery to charge fully before first use. The charging indicator light (if present) will change color or turn off when charging is complete. Do not use the sprayer while charging.

4.2. Assembling the Sprayer

1. Attach Shoulder Straps: Securely fasten the shoulder straps to the designated attachment points on the sprayer tank. Ensure they are adjusted for comfortable carrying.
2. Connect Lance: Screw the extendable stainless steel lance firmly onto the sprayer's hose connection point.
3. Select and Attach Nozzle: Choose the desired nozzle for your application and screw it onto the end of the lance.
4. Insert Filter: Place the filter basket into the tank opening before filling to prevent debris from entering the pump system.

Figure 2: Sprayer Details. This image highlights key features of the sprayer, including the power switch, charging port, battery indicator gauge, and the ergonomic design of the shoulder straps for comfortable use.

5. Operating Instructions

5.1. Filling the Tank

1. Ensure the sprayer is on a stable, level surface.
2. Unscrew and remove the tank lid.
3. Carefully pour the desired liquid (water, herbicide, pesticide, etc.) into the tank, ensuring it does not exceed the 16-liter capacity mark. Use the filter basket to prevent debris.
4. Securely replace and tighten the tank lid.

5.2. Manual Operation

1. Ensure the battery power switch is in the "OFF" position.
2. Operate the manual lever pump handle repeatedly to build pressure inside the tank.
3. Once sufficient pressure is built, press the trigger on the lance to begin spraying.
4. Continue pumping the lever as needed to maintain pressure during spraying.

5.3. Battery-Powered Operation

1. Ensure the battery is sufficiently charged.
2. Flip the power switch to the "ON" position. The pump will activate and build pressure automatically.
3. Monitor the pressure gauge (if available) to ensure optimal operating pressure.
4. Press the trigger on the lance to begin spraying. The pump will automatically maintain pressure as you spray.
5. To stop spraying, release the trigger. To turn off the pump, flip the power switch to the "OFF" position.

5.4. Adjusting Spray Pattern

The included nozzles offer different spray patterns. To change the pattern, twist the nozzle head or replace the nozzle with a different type as required for your application (e.g., fine mist, jet stream).

6. Maintenance

6.1. After Each Use

1. Empty Tank: Completely empty any remaining liquid from the tank.
2. Rinse Tank: Fill the tank with clean water and spray it through the lance until the tank is empty. Repeat this process several times to thoroughly clean the pump, hose, and lance.
3. Clean Nozzles: Remove the nozzle and clean any residue or blockages. Use a soft brush or needle if necessary.
4. Clean Filter: Remove and rinse the filter basket.
5. Dry Components: Allow all components to air dry completely before storage.

6.2. Battery Care

• Charge the battery fully after each use, especially before long-term storage.
• If storing for extended periods, charge the battery every 3-6 months to maintain its lifespan.
• Store the sprayer and battery in a cool, dry place, away from direct sunlight and extreme temperatures.

6.3. General Care

• Inspect hoses, connections, and seals regularly for wear or damage. Replace any worn parts immediately.
• Do not use abrasive cleaners or solvents on any part of the sprayer.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official MADER website. Keep your proof of purchase for warranty claims.

Note: Spare parts availability information is currently unavailable. Please contact customer support for assistance with parts.