1. Introduction and Overview
This manual provides essential information for the proper use and maintenance of your Bang & Olufsen Beolit 20 portable Bluetooth speaker. Please read these instructions carefully before operating the device.
Figure 1: Bang & Olufsen Beolit 20 Speaker
What's in the Box:
- Beolit 20 Wireless Speaker
- USB-C to USB-A cable (1.25m)
- Plug Adapter
- Quick Start Guide
2. Setup
2.1 Charging the Speaker
Before first use, fully charge your Beolit 20 speaker. Connect the supplied USB-C to USB-A cable to the speaker's USB-C port and the plug adapter to a power outlet. A full charge typically takes approximately 3 hours. The battery provides up to 8 hours of playback at typical listening volumes.
Figure 2: USB-C Charging Port and Audio Input
2.2 Powering On/Off
To power on the Beolit 20, press and hold the power button located on the top panel until the indicator light illuminates. To power off, press and hold the power button again until the light extinguishes.
2.3 Bluetooth Pairing
- Ensure the Beolit 20 is powered on.
- Press the Bluetooth button on the top panel. The indicator light will begin to flash blue, indicating pairing mode.
- On your device (smartphone, tablet, etc.), navigate to the Bluetooth settings and select "Beolit 20" from the list of available devices.
- Once connected, the Bluetooth indicator light on the speaker will turn solid blue.
2.4 Bang & Olufsen App Setup
For enhanced control and customization, download the Bang & Olufsen App from your device's app store. The app allows you to adjust sound profiles, manage stereo pairing, and receive software updates.
3. Operating Instructions
3.1 Control Buttons
The top panel of the Beolit 20 features intuitive control buttons:
Figure 3: Top Panel Controls
- Power Button: Press and hold to turn the speaker on or off.
- Bluetooth Button: Press to enter Bluetooth pairing mode.
- Play/Pause Button: Press to play or pause audio.
- Volume Up (+): Press to increase volume.
- Volume Down (-): Press to decrease volume.
3.2 Wireless Qi Charging
The Beolit 20 features a built-in wireless Qi charging pad on its top surface. Place your Qi-compatible device (e.g., smartphone, earbuds) on the designated area to initiate charging. Ensure the speaker is powered on for this feature to function.
Figure 4: Wireless Qi Charging
3.3 Stereo Pairing
For an enhanced audio experience, two Beolit 20 speakers (or a Beolit 20 and a Beolit 17) can be paired for stereo sound. This feature is managed through the Bang & Olufsen App.
3.4 Sound Customization (Beosonic EQ)
Utilize the Beosonic equalizer within the Bang & Olufsen App to customize your listening experience. Adjust sound profiles to match your preferences and the acoustic environment.
4. Maintenance
4.1 Cleaning
To clean the speaker, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or sprays directly on the device. Do not immerse the speaker in water.
4.2 Battery Care
To prolong battery life, avoid fully discharging the speaker frequently. Store the speaker in a cool, dry place when not in use for extended periods. Charge the battery periodically if stored for a long time.
5. Troubleshooting
If you encounter issues with your Beolit 20 speaker, refer to the following common solutions:
- No Power: Ensure the speaker is charged. Connect it to a power source using the provided USB-C cable and adapter.
- No Bluetooth Connection: Verify that Bluetooth is enabled on your device and the speaker is in pairing mode (flashing blue light). Try unpairing and re-pairing the device.
- No Sound: Check the volume levels on both the speaker and your connected device. Ensure the correct audio source is selected on your device.
- Poor Sound Quality: Move the speaker closer to your connected device to reduce interference. Adjust the equalizer settings in the Bang & Olufsen App.
- Wireless Charging Not Working: Ensure the speaker is powered on and your device is Qi-compatible and correctly positioned on the charging pad.
For further assistance, consult the Bang & Olufsen App or visit the official Bang & Olufsen support website.
6. Specifications
| Feature | Detail |
|---|---|
| Model Name | Beolit 20 |
| Item Model Number | 1253300 |
| Brand | Bang & Olufsen |
| Speaker Type | Bookshelf |
| Special Feature | Stereo pairing, Portable |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth |
| Power Source | Battery Powered |
| Battery Capacity | 3.2 Milliampere Hour (mAh) |
| Charging Time | 3 Hours |
| Speaker Maximum Output Power | 70 Watts |
| Signal-to-Noise Ratio | 93 dB |
| Product Dimensions | 5.3"D x 9"W x 7.4"H |
| Item Weight | 5.95 pounds |
| Color | Anthracite |
| Control Method | Touch |
| Maximum Range | 10 Meters (Bluetooth) |
| Is Waterproof | FALSE |
7. Warranty and Support
7.1 Warranty Information
The Bang & Olufsen Beolit 20 speaker comes with a limited warranty. Please refer to the warranty card included in your product packaging or visit the official Bang & Olufsen website for detailed terms and conditions.
7.2 Customer Support
For technical support, service, or additional information, please visit the official Bang & Olufsen support website or contact their customer service department. Contact details can typically be found on the brand's website or in the product documentation.
