1. Product Overview
The LituFoto R16 is a compact and versatile RGB video light designed for photography and video applications. It features a combination of bi-color and RGB lighting capabilities, allowing for precise control over color temperature, hue, saturation, and brightness. The durable aluminum shell houses a built-in 4040mAh lithium battery, providing portable power for extended use. The R16 also includes a USB Type-A port for powering external devices.
Image 1: Front view of the LituFoto R16 RGB Video Light, showing the display screen and controls.
2. Package Contents
- LituFoto R16 RGB Video Light
- USB Charging Cable
- User Manual
Image 2: The LituFoto R16 light shown with its USB charging cable and a size comparison to a smartphone, highlighting its portability and power output feature.
3. Setup and Charging
3.1 Initial Charging
Before first use, fully charge the LituFoto R16. Connect the provided USB charging cable to the 5V in USB-C port on the side of the light and to a standard USB power adapter (not included). The built-in battery takes approximately three hours to fully charge.
3.2 Mounting the Light
The LituFoto R16 features two 1/4"-20 threaded mounting holes, one on the bottom and one on the side. This allows for flexible mounting options on camera cages, light stands, or other accessories.
Image 3: Side view of the LituFoto R16, illustrating the 5V in (USB-C) and 5V out (USB-A) ports, along with the control dials.
4. Operating Instructions
4.1 Power On/Off
Press and hold the power button (usually marked with O/M or a power symbol) located on the side of the light to turn it on or off.
4.2 Display Screen Overview
The built-in display screen provides real-time information on the light's settings, including:
- H: Hue (0-360°)
- S: Saturation (0-100%)
- %: Brightness (0-100%)
- K: Color Temperature (3200K-7500K)
- Light effect mode
- Battery power remaining
Image 4: Close-up of the LituFoto R16 display screen, detailing the various parameters shown.
4.3 Mode Selection
The LituFoto R16 offers three main operating modes:
- Bi-color Mode: Adjust color temperature from 3200K (warm) to 7500K (cool) and brightness from 0% to 100%.
- RGB Mode: Select colors across the 0-360° hue range, and control saturation and brightness from 1% to 100%.
- Scene Effects Mode: Choose from nine built-in special lighting effects.
Use the mode button (often combined with the power button or a dedicated 'M' button) to cycle through these modes.
4.4 Adjusting Settings
Use the control dials or buttons on the side of the light to adjust parameters within each mode:
- Brightness: Adjusts the light intensity from 0% to 100%.
- Color Temperature: In bi-color mode, adjust from 3200K to 7500K.
- Hue (H): In RGB mode, select a color from 0° to 360°.
- Saturation (S): In RGB mode, control the intensity of the selected color from 0% to 100%.
Image 5: Angled view of the LituFoto R16, highlighting the physical control dials and buttons for adjusting settings.
4.5 Special Lighting Effects
The R16 includes nine pre-programmed lighting effects for creative scenarios:
- Intermittent Flash
- Frequent Flash
- Monitor Simulation
- Slow-Speed Color Cycle
- Hi-Speed Color Cycle
- Candle Light
- Police Lights
- Ambulance Lights
- Fire Truck Lights
Image 6: The LituFoto R16 showcasing several of its nine built-in lighting effects, such as police vehicle and fire fighting truck simulations.
Image 7: Another view of the LituFoto R16 demonstrating additional scene effects, including intermittent flash and candlelight simulation.
4.6 Power Output Function
The LituFoto R16 features a 5V out USB Type-A port, allowing it to function as a power bank to charge other devices, such as smartphones or cameras, while on location.
5. Maintenance
- Keep the light clean using a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not expose the light to water or high humidity.
- Store the light in a cool, dry place when not in use.
- Avoid dropping or subjecting the light to strong impacts.
6. Troubleshooting
6.1 Light Not Turning On
- Ensure the battery is charged. Connect the light to a USB power source and allow it to charge for at least 30 minutes before attempting to power on again.
- Press and hold the power button firmly for a few seconds.
6.2 Inconsistent Brightness or Color
- Check the battery level. Low battery can affect performance.
- Ensure no obstructions are blocking the light output.
- Reset the light by turning it off and on again.
6.3 External Device Not Charging
- Verify the external device is properly connected to the 5V out USB-A port.
- Ensure the LituFoto R16 has sufficient battery charge to power an external device.
- Check the charging cable for the external device for any damage.
7. Specifications
| Feature | Detail |
|---|---|
| Model | R16 |
| Color Temperature Range | 3200K to 7500K |
| RGB Hue Range | 0 to 360° |
| Brightness Adjustment | 0% to 100% |
| Saturation Adjustment | 1% to 100% (in RGB mode) |
| LEDs | 145 |
| CRI Ra | 96 (in bi-color mode) |
| Battery Capacity | 4040mAh Integrated Lithium Battery |
| Battery Life (100% brightness) | Approximately 2 hours |
| Charging Time | Approximately 3 hours |
| Power Output Port | 5 VDC, 2A USB Type-A |
| Mounting Threads | Two 1/4"-20 threads |
| Chassis Material | Aluminum |
| Parcel Dimensions | 20.8 x 12.8 x 3.7 cm |
| Weight | 361 g |
| Country of Origin | China |
8. Warranty Information
The LituFoto R16 RGB Camera and Video Light comes with a 6-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims. This warranty covers manufacturing defects and does not cover damage caused by misuse, accidents, or unauthorized modifications.
9. Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Litufoto customer support. Refer to the contact information provided with your product packaging or visit the official Litufoto website.
Manufacturer Contact Information: 4164946369