Sinperne B08G4QLP3L

Sinperne 3-in-1 Hair Dryer & Volumizer Instruction Manual

Model: B08G4QLP3L

Product Overview

The Sinperne 3-in-1 Hair Dryer & Volumizer is a versatile styling tool designed to dry, straighten, curl, and volumize hair. It features interchangeable brush heads, negative ion technology, and ceramic coating for enhanced hair care.

Key Features:

Sinperne 3-in-1 Hair Dryer and Volumizer with three interchangeable brush heads displayed.

Image: The Sinperne 3-in-1 Hair Dryer and Volumizer showing its main handle and three distinct interchangeable brush heads, including a large oval brush, a medium round brush, and a smaller round brush.

Safety Information

This section contains important safety guidelines for the Sinperne Hair Dryer & Volumizer. Please read carefully before use.

Setup and Assembly

Follow these steps to set up your Sinperne Hair Dryer & Volumizer and attach the desired brush head.

Attaching Brush Heads:

  1. Select the desired brush head and align it with the card slot on the handle.
  2. Twist the brush head left with slight effort until it clicks securely into place.

Detaching Brush Heads:

  1. Ensure the device is unplugged and cooled down.
  2. Press the release button located on the handle.
  3. Twist the brush head right to remove it from the handle.
Diagram showing steps to install and disassemble the brush heads on the hair dryer.

Image: Visual guide illustrating the installation and disassembly process for the interchangeable brush heads.

Power Connection:

  1. Plug the ALCI safety plug into a suitable power outlet.
  2. Press the yellow "test" button on the plug to turn off the power.
  3. Press the red "reset" button to connect power and ensure the device is ready for use.
Steps to connect power to the hair dryer, showing the test and reset buttons on the ALCI plug.

Image: A step-by-step visual guide on how to properly connect the hair dryer to power using its ALCI safety plug.

Installation Video:

Video: This video demonstrates the installation process for the interchangeable brush heads, showing how to securely attach them to the main unit.

Operating Instructions

Achieve your desired hairstyle by following these operating guidelines.

General Usage:

  1. For best results, towel dry hair to remove excess water before styling.
  2. Use the blow dryer head for quick drying of wet hair.
  3. Select and install the appropriate brush head for your desired hair style (straightening, curling, volumizing).
  4. To curl ends, place the hair brush UNDER the ends and hold for 2 to 3 seconds before rotating.

Temperature and Speed Settings:

The device features three temperature/speed levels:

Diagram showing the three temperature level settings: High, Middle, and Low, with corresponding fan and heat icons.

Image: A visual representation of the three temperature and speed settings available on the hair dryer, indicating their recommended uses.

Styling Demonstration Video:

Video: This video provides a demonstration of the hair dryer brush in action, showcasing its ability to style hair.

Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your hair dryer and volumizer.

Troubleshooting

If you encounter any issues with your Sinperne Hair Dryer & Volumizer, refer to the following common troubleshooting tips.

ProblemPossible CauseSolution
Device does not turn on.Not properly plugged in; ALCI safety plug tripped; Power outage.Ensure plug is fully inserted. Press the red "reset" button on the ALCI plug. Check household power supply.
Brush head detaches during use.Brush head not securely locked.Ensure the brush head is twisted left until it clicks firmly into place during installation.
Reduced airflow or overheating.Air vents blocked by dust or hair.Unplug and allow to cool. Clean any debris from the air intake and brush bristles.
Hair not styling as desired.Incorrect temperature setting; Hair too wet; Improper technique.Adjust temperature setting. Towel dry hair more thoroughly. Review operating instructions for proper technique.

Specifications

Detailed technical specifications for the Sinperne 3-in-1 Hair Dryer & Volumizer.

SpecificationDetail
Product Dimensions19 x 25 x 34 inches; 2.36 Pounds
Wattage1000 watts
Voltage110 volts
MaterialCeramic
Power SourceCorded Electric
Model Number (ASIN)B08G4QLP3L
ManufacturerDongguan Shengming Industrial Co., Ltd
First Available DateAugust 18, 2020
Diagram showing the dimensions of the hair dryer handle and its three brush heads, compared to a smartphone.

Image: A detailed diagram illustrating the dimensions of the hair dryer handle and each of its three interchangeable brush heads.

Warranty and Support

For warranty information or product support, please contact Sinperne customer service through their official channels. Refer to your purchase documentation for specific warranty terms and conditions.

You can visit the Sinperne Store on Amazon for more information and contact options.

Related Documents - B08G4QLP3L

Preview Sinperne SM-525 Professional Interchangeable Hair Dryer Brush User Manual and Safety Guide
Comprehensive user manual and safety instructions for the Sinperne SM-525 Professional Interchangeable Hair Dryer Brush, covering features, usage, maintenance, and important safety warnings.