Introduction
The ARKRAY GLUCOCARD Vital Blood Glucose Test Strips are designed for use with the ARKRAY GLUCOCARD Vital Blood Glucose Monitoring System. These strips provide fast and accurate blood glucose readings, requiring a minimal blood sample and featuring automatic coding for ease of use. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your test strips to ensure reliable results.
Image: ARKRAY GLUCOCARD Vital Test Strip highlighting features like precision, quick results, and reliability.
Setup
The GLUCOCARD Vital Test Strips are designed for automatic coding, meaning no manual setup or calibration is required before use. Simply ensure your GLUCOCARD Vital Blood Glucose Meter is clean and ready.
Preparing for a Test:
- Wash your hands thoroughly with soap and warm water. Dry them completely.
- Prepare your lancing device and a new lancet according to its instructions.
- Remove a test strip from its vial. Close the vial cap immediately and tightly to protect the remaining strips from moisture.
Image: Visual instructions for inserting the strip, applying blood, and reading results.
Operating Instructions
Follow these steps to perform a blood glucose test using your GLUCOCARD Vital Test Strips and meter:
- Insert the Test Strip: With the meter turned off, insert the test strip into the test strip port of your GLUCOCARD Vital meter. The meter will automatically turn on and display a test strip symbol.
- Obtain a Blood Sample: Use your lancing device to get a blood drop. For accurate results, ensure the blood drop is sufficient (0.5 microliters).
- Apply Blood to the Strip: Touch the tip of the test strip to the blood drop. The blood will be drawn into the strip automatically. Do not apply blood to the top of the strip.
- Read Results: The meter will begin counting down. Your blood glucose result will appear on the display in approximately 7 seconds.
- Record and Discard: Record your result if necessary. Carefully remove the used test strip from the meter and dispose of it properly in a sharps container or according to local regulations.
Maintenance
Proper care and storage of your GLUCOCARD Vital Test Strips are crucial for accurate results.
- Storage: Store test strips in their original vial with the cap tightly closed. Keep them in a cool, dry place at room temperature, away from direct sunlight and heat. Do not refrigerate or freeze.
- Expiration Date: Check the expiration date printed on the test strip vial. Do not use strips past their expiration date.
- Vial Life: Once the vial is opened, the strips are typically good for a specific period (e.g., 3-6 months). Refer to the instructions on the vial or packaging for the exact duration. Write the discard date on the vial when you open it.
- Handling: Handle test strips with clean, dry hands. Do not bend, cut, or alter the test strips.
Troubleshooting
If you encounter issues during testing, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Meter does not turn on when strip is inserted. | Strip inserted incorrectly; meter batteries low or dead. | Reinsert strip correctly. Check or replace meter batteries. |
| Error message on meter display. | Insufficient blood sample; expired or damaged strip; meter malfunction. | Ensure adequate blood sample. Use a new, unexpired strip. Refer to meter manual for specific error codes. |
| Result seems inaccurate. | Improper strip storage; expired strip; contamination; incorrect testing procedure. | Review storage conditions and expiration date. Repeat test with a new strip. Consult your healthcare professional if concerns persist. |
For persistent issues, refer to your GLUCOCARD Vital Blood Glucose Meter's instruction manual or contact ARKRAY customer support.
Specifications
- Product Name: GLUCOCARD Vital Blood Glucose Test Strips
- Compatible Meter: ARKRAY GLUCOCARD Vital Blood Glucose Monitoring System
- Sample Volume: 0.5 microliters (µL)
- Test Time: Approximately 7 seconds
- Coding: Automatic (No coding required)
- Number of Pieces: 150 count (as per product listing)
- Manufacturer: Arkray USA
- Product Dimensions: 2.2 x 2.2 x 3.4 inches (vial dimensions, approximate)
- Date First Available: October 15, 2015
Important Safety Information
Please read all instructions carefully before using the GLUCOCARD Vital Test Strips. This product is intended for in vitro diagnostic use only. Do not use for diagnosis of diabetes or for screening of newborns.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. Always consult with a healthcare professional for diagnosis and treatment.
Warranty and Support
For specific warranty information regarding your ARKRAY GLUCOCARD Vital Blood Glucose Test Strips, please refer to the documentation included with your product or visit the official ARKRAY USA website. If you require technical assistance, have questions about product usage, or need to report an issue, please contact ARKRAY USA customer support directly.
Manufacturer: Arkray USA
Contact information can typically be found on the product packaging or the manufacturer's official website.
