1. Introduction
This manual provides essential instructions for the safe and effective use of your Frewico X10 Wearable Bluetooth Speaker Watch. Please read this manual thoroughly before operating the device and retain it for future reference.
1.1 Package Contents
- Frewico X10 Wearable Bluetooth Speaker Watch
- USB Charging Cable
- Instruction Manual (this document)
2. Product Overview and Features
The Frewico X10 is a versatile wearable Bluetooth speaker designed for portability and convenience. It offers hands-free communication, music playback, and additional functionalities.
Image: The Frewico X10 Wearable Bluetooth Speaker Watch, showcasing its waterproof design with water splashing around it.
2.1 Key Features
- Bluetooth Connectivity: Seamless pairing with Bluetooth-enabled devices such as mobile phones, smartwatches, tablets, and laptops.
- Hands-Free Calling: Integrated microphone and speaker allow for answering calls directly from the watch.
- Micro SD Card Playback: Supports Micro SD cards for offline music playback (card not included).
- Voice Command Support: Compatible with intelligent voice assistants like Google Assistant and Siri.
- Selfie Function: Remote control for snapping photos from a connected smartphone.
- True Wireless Stereo (TWS): Ability to pair two X10 speakers for a stereo sound experience.
- Water Resistance: IP45 rated for dust and water resistance, suitable for daily splashes and rain.
- Long Playtime: Up to 10 hours of continuous audio playback on a single charge.
Image: Two Frewico X10 speaker watches illustrating the True Wireless Stereo (TWS) pairing capability for enhanced audio.
3. Setup
3.1 Charging the Device
- Connect the provided USB charging cable to the charging port on the Frewico X10.
- Connect the other end of the USB cable to a standard USB power adapter (5V DC) or a computer USB port.
- The charging indicator light will illuminate. A full charge typically takes approximately 1.5 hours.
- Once fully charged, the indicator light may change or turn off, depending on the device's design. Disconnect the charging cable.
3.2 Powering On/Off
- To Power On: Press and hold the Power button (usually marked with a power symbol) for a few seconds until you hear an audible prompt or see an indicator light.
- To Power Off: Press and hold the Power button again for a few seconds until you hear an audible prompt or the indicator light turns off.
4. Operation
4.1 Bluetooth Pairing
To connect your Frewico X10 to a Bluetooth-enabled device:
- Ensure the Frewico X10 is powered on and in pairing mode (it may automatically enter pairing mode when first turned on, or you may need to press a dedicated Bluetooth button). The indicator light will typically flash to indicate pairing mode.
- On your smartphone, tablet, or other device, navigate to the Bluetooth settings.
- Search for available devices. The Frewico X10 will appear as "Frewico X10" or a similar name.
- Select the Frewico X10 to initiate pairing. Once connected, you will hear a confirmation tone, and the indicator light will typically become solid.
Image: The Frewico X10 speaker watch worn on a wrist, with a smartphone displaying its Bluetooth settings, showing the speaker as an available device for pairing.
4.2 Music Playback
- Via Bluetooth: Once paired, play audio from your connected device. Use the volume buttons on the X10 or your device to adjust sound levels.
- Via Micro SD Card: Insert a Micro SD card (up to 32GB, MP3 format) into the designated slot. The speaker will automatically detect the card and begin playing music. Use the control buttons on the X10 to navigate tracks and adjust volume.
Image: A detailed view of the Frewico X10 speaker watch, highlighting the Micro SD card slot and USB port for charging and data transfer.
4.3 Hands-Free Calling
- When a call comes in on your paired phone, the X10 will ring.
- Press the Call/Play/Pause button (often a phone icon or multi-function button) once to answer the call.
- Speak into the integrated microphone.
- Press the Call/Play/Pause button again to end the call.
4.4 Voice Assistant
To activate your smartphone's voice assistant (Siri, Google Assistant):
- Ensure your X10 is paired with your smartphone.
- Press the dedicated Voice Assistant button (if available) or the Call/Play/Pause button twice quickly.
- You will hear a prompt, indicating the voice assistant is active. You can then issue commands through the X10's microphone.
Image: The Frewico X10 speaker watch on a user's wrist, demonstrating the activation of its voice command feature by pressing a button.
4.5 Selfie Function
To use the X10 as a remote shutter for your phone's camera:
- Ensure your X10 is paired with your smartphone.
- Open your smartphone's camera application.
- Press the Selfie button (often the volume up or down button, or a dedicated button) on the X10 to remotely trigger the camera shutter.
Image: A smartphone screen showing a camera application, with the Frewico X10 speaker watch on a wrist in the foreground, illustrating its remote selfie control capability.
5. Maintenance
5.1 Cleaning
- Wipe the device with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or strong chemicals.
5.2 Water Resistance (IP45)
The Frewico X10 is rated IP45, meaning it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for:
- Wearing while washing hands.
- Use in light rain or during showering.
- Protection against sweat.
Important: The device is not designed to be partially or fully submerged in water. Avoid prolonged exposure to heavy rain or direct water streams.
Image: The Frewico X10 speaker watch on a wrist, with water running over it, demonstrating its IP45 water resistance for everyday use.
5.3 Storage
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery periodically to maintain its health.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Battery is depleted. | Charge the device fully using the provided USB cable. |
| Cannot pair via Bluetooth. | Bluetooth is off on the source device; X10 is not in pairing mode; X10 is already connected to another device. | Ensure Bluetooth is enabled on your device. Put the X10 into pairing mode. Disconnect X10 from any other devices. |
| No sound or low volume. | Volume is too low on X10 or source device; device is not properly connected. | Increase volume on both the X10 and your connected device. Re-establish Bluetooth connection. |
| Micro SD card not playing. | Card not inserted correctly; unsupported file format; card is corrupted. | Ensure the card is fully inserted. Verify music files are in MP3 format. Try a different Micro SD card. |
| Selfie function not working. | Not paired with phone; camera app not open. | Ensure X10 is paired. Open your phone's camera app before pressing the selfie button. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | X10 |
| Brand | Frewico |
| Connectivity Technology | Bluetooth |
| Wireless Communication | Bluetooth |
| Bluetooth Range | Up to 33 feet (10 meters) |
| Speaker Type | Portable Bluetooth Speaker |
| Audio Output Mode | Mono |
| Speaker Maximum Output Power | 3 Watts |
| Frequency Response | 20 Hz (minimum, full range not specified) |
| Signal-to-Noise Ratio | 70 dB |
| Impedance | 4 Ohm |
| Power Source | Battery Powered (1 Lithium Polymer battery included) |
| Battery Capacity | 500 mAh |
| Charging Time | Approx. 1.5 Hours |
| Playtime | Up to 10 Hours |
| Water Resistance Level | IP45 (Waterproof) |
| Material | Plastic |
| Item Weight | 2.88 ounces (0.18 Pounds) |
| Product Dimensions | 0.8"D x 0.12"W x 0.17"H |
| Control Method | Buttons |
| Includes MP3 Player | Yes (via Micro SD card) |
| UPC | 736140095292 |
8. Warranty and Support
8.1 Warranty Information
The Frewico X10 Wearable Bluetooth Speaker Watch comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.
8.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your Frewico X10, please refer to the contact information provided with your purchase or visit the official Frewico website for support resources.
