GLOBBER Master Lights Tricycle Scooter User Manual

1. Introduction

Thank you for choosing the GLOBBER Master Lights Tricycle Scooter. This manual provides essential information for the safe assembly, operation, and maintenance of your scooter. Please read it thoroughly before first use and keep it for future reference.

The GLOBBER Master Lights scooter is a robust three-wheeled scooter designed for children aged 4 and above. It features a wide, comfortable handlebar, a spacious platform, a wheel rotation lock, and glowing LED front wheels for enhanced visibility and fun.

Image 1.1: The Globber Master Lights Tricycle Scooter, fully assembled.

2. Safety Information

Always prioritize safety when using the scooter. Failure to follow these instructions may result in serious injury.

• Protective Gear: Always wear a helmet, knee pads, elbow pads, and wrist guards.
• Supervision: Children should always be supervised by an adult.
• Weight Limit: Do not exceed the maximum weight capacity of 50 kg (110 lbs).
• Terrain: Use on smooth, dry, paved surfaces away from traffic. Avoid uneven surfaces, sand, gravel, or water.
• Braking: The scooter is equipped with a rear brake. Practice braking in a safe area before riding at speed.
• Pre-Ride Check: Before each use, ensure all clamps, bolts, and wheels are securely fastened and in good condition.
• Night Riding: The glowing LED wheels enhance visibility, but avoid riding at night or in low-light conditions unless absolutely necessary and with additional lighting.

3. Assembly Instructions

The GLOBBER Master Lights scooter comes partially assembled. Follow these steps to complete the setup:

1. Unpack Components: Carefully remove all parts from the packaging. Ensure all components listed in the 'Included Components' section are present.
2. Attach Handlebar: Insert the handlebar stem into the opening on the front of the scooter deck. Ensure it clicks securely into place. You may need to press a button or lever to fully engage the locking mechanism.
3. Adjust Handlebar Height: Loosen the quick-release clamp on the handlebar stem. Adjust the handlebar to one of the four height settings (74 cm, 79 cm, 84 cm, 89 cm, 94 cm) suitable for the rider's height. Ensure the handlebar is at hip level when the rider is standing on the deck. Tighten the quick-release clamp firmly.
4. Final Check: Verify that the handlebar is firmly attached and does not wobble. Check that the wheels spin freely and the brake functions correctly.

Image 3.1: Illustration of the handlebar height adjustment mechanism.

4. Operating Instructions

4.1 Riding the Scooter

• Place one foot firmly on the scooter deck.
• Push off with the other foot to gain momentum.
• To steer, lean in the desired direction. The scooter's lean-to-steer mechanism allows for intuitive control.
• To stop, press down on the rear brake with your foot.

Image 4.1: A child demonstrating proper riding posture on the scooter.

4.2 Wheel Rotation Lock

For beginners, the scooter features a wheel rotation lock. This mechanism locks the front wheels in a straight position, making it easier for young riders to learn balance without steering. To engage or disengage the lock, locate the button or lever on the front of the scooter deck, near the base of the handlebar stem, and press it accordingly.

4.3 Folding Mechanism (Trolley Mode)

The GLOBBER Master Lights scooter can be folded into 'trolley mode' for easy transport and storage. To fold:

1. Locate the folding button/lever mechanism, typically at the base of the handlebar stem or on the side of the deck.
2. Activate the mechanism (e.g., pull up, push down, or press a button) to release the handlebar from its upright position.
3. Fold the handlebar down until it locks into the horizontal position, parallel to the deck.
4. In trolley mode, the scooter can be easily pulled along on its wheels.

Image 4.2: The scooter in its compact, folded 'trolley mode'.

4.4 LED Wheels

The front wheels of the scooter feature integrated LED lights that illuminate when the wheels are in motion. These lights are powered by kinetic energy and do not require batteries. They enhance visibility and add a fun element to riding.

5. Maintenance

Regular maintenance will prolong the life of your scooter and ensure safe operation.

• Cleaning: Wipe the scooter clean with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Lubrication: Periodically check and lubricate moving parts such as wheel bearings if necessary.
• Inspections: Regularly inspect all bolts, nuts, and fasteners to ensure they are tight. Check the wheels for wear and tear. Replace worn parts immediately.
• Storage: Store the scooter in a dry place, away from direct sunlight and extreme temperatures, to prevent material degradation.

6. Troubleshooting

7. Product Specifications

• Model Name: Master Lights
• Model Number: GLB-662-110
• Brand: Globber
• Color: Pink
• Age Range: Youth (Recommended for 4+ years)
• Maximum Weight Capacity: 50 Kilograms (110 lbs)
• Number of Wheels: 3
• Handlebar Height Adjustment: 4 levels (74 cm, 79 cm, 84 cm, 89 cm, 94 cm)
• Frame Material: Aluminum
• Main Material: Plastic
• Wheel Material: Polyurethane
• Wheel Size: 121 Millimeters
• Brakes: Rear braking system
• Special Features: Glowing LED wheels, Foldable (Trolley Mode), Wheel rotation lock
• Product Dimensions (L x W x H): 65 x 40 x 95 cm (25.6 x 15.7 x 37.4 inches)
• Item Weight: 2.79 Kilograms (6.15 lbs)
• Battery(s) / Pile(s) included: No (LED wheels are kinetic powered)
• Included Components: Scooter
• Manufacturer: Authentic Sports

8. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or visit the official Globber website. If you have any questions, require technical assistance, or need to order replacement parts, please contact Globber customer support through their official channels.

You can typically find contact information on the manufacturer's website: www.globber.com