Introduction
This manual provides instructions for the AikTryee Outdoor/Indoor Thermometer Hygrometer, Model 192817325503. This device is designed to accurately measure both temperature and humidity in various indoor and outdoor environments without requiring batteries. Its mechanical design ensures long-term reliability and ease of use.
Image: Front view of the AikTryee Outdoor/Indoor Thermometer Hygrometer, showing the temperature scale in Fahrenheit and Celsius, and the humidity dial.
Setup
The AikTryee Thermometer Hygrometer requires no assembly or batteries. It is ready for use directly out of the packaging.
- Unpacking: Carefully remove the device from its packaging.
- Placement Options:
- Wall Mounting: Use the integrated hanging hole at the top of the device. Secure it to a wall using a suitable screw or hook (not included).
- Surface Placement: Utilize the durable kickstand located on the back of the device to place it on any flat surface, such as a table, shelf, or desk.
- Optimal Location: For accurate readings, place the device in a location that is representative of the area you wish to measure. Avoid direct sunlight, heat sources, or areas with strong drafts, as these can affect accuracy.
Image: The back of the thermometer hygrometer, highlighting the hanging hole for wall mounting and the durable stand for surface placement.
Operating Instructions
This mechanical thermometer hygrometer operates continuously without user intervention. No buttons or adjustments are required.
- Temperature Reading: The vertical scale displays temperature in both Fahrenheit (℉) and Celsius (℃). Read the temperature indicated by the red liquid column.
- Humidity Reading: The circular dial at the bottom displays relative humidity (RH) as a percentage (%). Read the humidity level indicated by the needle.
- Response Time: Allow approximately 15-30 minutes for the device to stabilize and provide accurate readings after placement or significant environmental changes.
Image: A close-up view of the thermometer and hygrometer dials, showing the temperature scale and humidity percentage.
Maintenance
The AikTryee Thermometer Hygrometer requires minimal maintenance.
- Cleaning: Wipe the device with a soft, damp cloth to remove dust or dirt. Do not use abrasive cleaners or immerse the device in water.
- Storage: If storing the device for an extended period, keep it in a dry place away from extreme temperatures.
- Calibration: This mechanical device is factory-calibrated and generally does not require user calibration. If you suspect significant inaccuracy, compare readings with a known accurate device in a stable environment.
Troubleshooting
- Inaccurate Temperature/Humidity Readings:
- Check Placement: Ensure the device is not in direct sunlight, near a heat source, or in an area with strong air currents. These factors can significantly affect readings.
- Allow Stabilization: After moving the device, allow 15-30 minutes for the readings to stabilize to the new environment.
- Environmental Extremes: Operating the device outside its specified temperature and humidity ranges (-20℉ to 120℉ / -30℃ to 50℃; 1% to 99% RH) may lead to inaccurate or no readings.
- No Movement in Dials:
- Verify Environmental Change: Ensure there is an actual change in temperature or humidity in the environment. Mechanical devices respond to changes, but may appear static in stable conditions.
- Physical Obstruction: Check for any physical damage or obstruction to the internal mechanisms. If the device has been dropped or impacted, internal components may be damaged.
Specifications
| Model Number | 192817325503 |
| Temperature Range | -20℉ to 120℉ (-30℃ to 50℃) |
| Temperature Accuracy | ±2℉ |
| Humidity Range | 1% to 99% RH |
| Humidity Accuracy | ±2% RH |
| Display Type | Analog |
| Power Source | Mechanical (No Battery Required) |
| Product Dimensions | 9 x 1.9 x 0.27 inches |
| Weight | 1.76 ounces |
| Material | Durable Plastic Casing |
| Special Feature | Integrated Kickstand and Hanging Hole |
Image: The thermometer hygrometer with its key dimensions labeled: 9 inches height, 2.16 inches width, and 0.2 to 0.4 inches thickness.
Warranty Information
AikTryee products are manufactured to high-quality standards. For specific warranty details, please refer to the product packaging or contact AikTryee customer support. Keep your purchase receipt as proof of purchase for any warranty claims.
Customer Support
If you have any questions, concerns, or require assistance with your AikTryee Outdoor/Indoor Thermometer Hygrometer, please contact our customer support team. Contact information can typically be found on the product packaging or the official AikTryee website.
For online support, you may visit the AikTryee Store on Amazon.
