1. Introduction
This instruction manual provides comprehensive guidance for the assembly, proper use, and care of your new VASAGLE Side Table with 1 Drawer, Model ULET028W01. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image 1.1: The VASAGLE Side Table with 1 Drawer, shown in a living room setting next to a sofa.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the product.
- For safety reasons, it is mandatory to fix the product to the wall using the supplied anti-tip kit. This prevents accidental tipping, especially important in households with children or pets.
- Children are not permitted to climb on the product. Climbing can cause the table to tip over, leading to serious injury.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum static load capacity of 55.1 lb (25 kg) for the tabletop.
- Assemble the product on a soft, clean surface to prevent scratches or damage.
- Keep small parts and packaging materials away from children during assembly to avoid choking hazards.
3. Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x VASAGLE Side Table (Main unit components)
- 1 x Assembly Kit (Includes screws, dowels, and other fasteners)
- 1 x Anti-Tip Kit (For wall attachment)
- 1 x Instruction Manual
4. Setup & Assembly
Assembly typically takes approximately 20-30 minutes. Follow the numbered steps and illustrations provided in the included assembly kit. A Phillips head screwdriver (not included) may be required.
4.1 Preparation
- Clear a spacious area for assembly.
- Lay out all parts on a soft, clean surface (e.g., a blanket or carpet) to prevent scratches.
- Identify all components by their corresponding numbers/letters as per the assembly instructions.
4.2 Assembly Steps (General Overview)
- Attach Legs to Base: Secure the four pine legs to the bottom shelf using the provided fasteners.
- Construct Drawer Frame: Assemble the side panels and back panel to form the main structure of the table, ensuring the drawer runners (if applicable) are correctly oriented.
- Install Drawer: Assemble the drawer components and slide it into the designated slot. Note that this model features a drawer without metal rails, relying on a simple slide mechanism.

Image 4.1: The drawer of the side table, shown open with contents. The drawer operates without metal rails.
- Attach Tabletop: Secure the tabletop to the assembled frame.
- Install Anti-Tip Kit: Following the specific instructions in the anti-tip kit, attach the table to a wall stud or use appropriate wall anchors. This step is critical for stability and safety.
Refer to the detailed graphical instructions included in your package for precise step-by-step guidance.
5. Usage
The VASAGLE Side Table is designed for versatile use in various rooms. Its compact size and storage features make it suitable for:
- Bedroom Nightstand: Place next to your bed to hold a lamp, alarm clock, books, and other personal items. The drawer provides discreet storage for smaller essentials.

Image 5.1: The side table functioning as a nightstand, providing convenient bedside storage.
- Living Room End Table: Position beside a sofa or armchair to hold beverages, remote controls, or decorative items.
- Office or Study Accent: Use as a small storage unit for office supplies or as a surface for a small plant or decorative piece.
Ensure that items placed on the tabletop or within the drawer do not exceed the specified weight limits.
6. Maintenance
To ensure the longevity and appearance of your VASAGLE Side Table, follow these maintenance guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
- Heat and Moisture: Keep the table away from direct heat sources and areas of high humidity. Use coasters under hot or wet items.
- Fastener Checks: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
7. Troubleshooting
This section addresses common issues you might encounter with your side table.
- Issue: Table feels wobbly or unstable.
- Solution:
- Ensure all assembly screws are fully tightened.
- Verify that the table is placed on a flat, even surface.
- Confirm the anti-tip kit is correctly installed and secured to the wall.
- Issue: Drawer does not slide smoothly.
- Solution:
- Check for any obstructions inside the drawer compartment.
- Ensure the drawer itself is assembled correctly and not warped.
- As this model features a drawer without metal rails, minor friction is normal. Ensure the drawer is aligned properly within its guides.

Image 7.1: Detail of the drawer's interior, showing the simple slide mechanism without metal rails.
- Issue: Missing parts or damaged components upon arrival.
- Solution:
- Refer to the "Package Contents" section (Section 3) and the assembly instructions to confirm missing items.
- Contact VASAGLE customer support immediately with your purchase details and a description of the missing or damaged parts for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | VASAGLE |
| Model Name | Side Table with 1 Drawer |
| Model Number | ULET028W01 |
| Color | White |
| Material | Engineered Wood, Pine Legs |
| Product Dimensions (D x W x H) | 13.8"D x 19.7"W x 21.7"H |
| Product Weight | 24.3 lb (11 kg) |
| Max. Static Load Capacity (Tabletop) | 55.1 lb (25 kg) |
| Number of Drawers | 1 |
| Assembly Required | Yes |

Image 8.1: Dimensional diagram of the side table, illustrating its depth (13.8"), width (19.7"), and height (21.7").
9. Warranty & Support
VASAGLE products are manufactured with quality and durability in mind. For specific warranty information, please refer to the documentation included with your purchase or visit the official VASAGLE website.
If you encounter any issues, require replacement parts, or have questions regarding your product, please contact VASAGLE customer support. Have your model number (ULET028W01) and purchase details ready for faster service.
Contact Information:
- Website: www.vasagle.com (or refer to your purchase platform for direct support)
- Email: Refer to your product packaging or purchase confirmation for customer service email.







