Introduction
This manual provides essential information for the safe and effective use of your Duracell 250 Lumen Aluminum LED Flashlight. Please read these instructions carefully before operating the device and retain them for future reference. This flashlight is designed for general illumination tasks, offering reliable performance in various indoor and outdoor settings.
Image: The Duracell 250 Lumen Aluminum LED Flashlight, showcasing its compact design.
Product Features
- Vivid Illumination: Equipped with a powerful LED, providing 250 lumens of bright light.
- Durable Construction: Crafted from aircraft-grade aluminum, ensuring durability and resistance to impact.
- Tail Cap Switch: Features a convenient tail cap switch for easy operation.
- Beam Distance: Projects light up to 180 meters for clear visibility.
- Battery Life: Provides up to 3 hours of continuous use with 3-AAA Duracell batteries (included).
- Water Resistance: Designed with water resistance for use in various conditions.
Image: Overview of key features including 250 lumens, 1 hour 30 minutes runtime, 180m beam distance, and 1m impact resistance.
Setup: Battery Installation
Your Duracell 250 Lumen Flashlight requires three (3) AAA alkaline batteries for operation. The batteries are included with your purchase.
- Unscrew the tail cap of the flashlight by turning it counter-clockwise.
- Insert the three AAA batteries into the battery compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the flashlight.
- Screw the tail cap back onto the flashlight by turning it clockwise until it is securely tightened.
Image: The Duracell flashlight shown with three AAA batteries, illustrating the battery type required.
Video: This video demonstrates the features and battery installation process for the Duracell 250 Lumen Aluminum Flashlight.
Operating Instructions
The Duracell 250 Lumen Flashlight is operated using the tail cap switch.
- To Turn On/Off: Press the tail cap switch completely until it clicks to turn the flashlight on or off.
- To Change Modes: While the flashlight is on, lightly press the tail cap switch (without clicking) to cycle through the available light modes: High, Low, and Strobe. The flashlight will remember the last mode used when turned off and on again.
Image: Close-up of the Duracell flashlight highlighting the tail cap switch and aircraft-grade aluminum body.
Maintenance
- Cleaning: Wipe the flashlight with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the light output becomes dim. Always replace all three batteries at the same time with new AAA alkaline batteries.
- Storage: If storing the flashlight for an extended period, remove the batteries to prevent leakage and damage. Store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | Batteries are depleted or incorrectly installed. | Replace batteries with new ones, ensuring correct polarity. Check that the tail cap is fully tightened. |
| Light is dim or flickers. | Low battery power or loose tail cap. | Replace batteries. Ensure the tail cap is securely tightened. |
| Cannot change light modes. | Switch not being pressed lightly enough or too quickly. | Ensure the flashlight is on. Lightly press the tail cap switch without fully clicking to cycle modes. Allow a brief pause between presses. |
Specifications
- Model Number: 8234DF250
- Light Output: 250 Lumens
- Beam Distance: 180 meters
- Power Source: 3 x AAA Batteries (Alkaline)
- Battery Life: Up to 3 hours
- Material: Aircraft-grade Aluminum
- Color: Black
- Flashlight Dimensions: Approximately 5.1 inches (Length) x 1.38 inches (Diameter)
- Item Weight: 5.1 ounces
- Water Resistance Level: Waterproof
- Manufacturer: Infinity X1
Image: The Duracell flashlight with indicated dimensions of 5.1 inches in length and 1.38 inches in diameter.
Warranty and Support
This product comes with a standard manufacturer's warranty. For specific details regarding warranty coverage, claims, or technical support, please refer to the product packaging or contact the manufacturer, Infinity X1, directly.
You can often find contact information for the manufacturer on their official website or through the retailer where the product was purchased.
