ZenStyle 2-Tier X-Design Console Table (Model 0765) User Manual

1. Safety Instructions

Read all instructions carefully before assembly and use. Keep this manual for future reference.

• Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
• Assemble the table on a soft, clean surface to prevent scratches.
• Tighten all screws and bolts securely, but do not overtighten. Periodically check and retighten fasteners as needed.
• Anti-Tipping Device: For added safety, especially in homes with children or pets, secure the table to a wall using the provided anti-tipping device. Follow the installation instructions carefully.
• Do not exceed the maximum weight capacity of 110 pounds per shelf.
• Keep small parts away from children during assembly to prevent choking hazards.
• This table is designed for indoor use only.

Figure 1: Illustration of the anti-tipping device. This device helps secure the table to a wall, preventing accidental tipping and enhancing safety.

2. Package Contents

Verify that all components listed below are included in your package before proceeding with assembly. If any parts are missing or damaged, please contact customer service.

Note: The exact number and type of fasteners may vary slightly. Refer to the included assembly guide for precise details.

3. Assembly Instructions

Assembly is straightforward and typically requires one person. Recommended tools include a hammer, screwdriver, and wrench (an Allen wrench is usually included).

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a protected surface. Compare them with the "Package Contents" list and the included assembly guide.
2. Attach Side Frames: Secure the side frames (C) to the tabletop (A) using the appropriate screws and bolts. Do not fully tighten yet.
3. Install Bottom Shelf: Connect the bottom shelf (B) to the side frames (C). Ensure the shelf is oriented correctly. Secure with screws and bolts, again, do not fully tighten.
4. Add Connecting Rods (if applicable): If your model includes additional connecting rods or supports (D), attach them now according to the assembly guide.
5. Final Tightening: Once all components are loosely assembled, place the table upright on a level surface. Systematically tighten all screws and bolts until secure. Avoid overtightening.
6. Install Anti-Tipping Device: Attach the anti-tipping device (F) to the back of the table and to a wall stud or using appropriate wall anchors. This step is crucial for stability and safety.

Figure 2: The robust X-structure design, crafted from high-density MDF, provides long-lasting support and stability for the console table.

4. Operating Instructions (Usage)

The ZenStyle 2-Tier X-Design Console Table is designed for versatile use in various indoor settings.

Placement

This console table is suitable for placement in:

• Entryways and Hallways
• Behind a Sofa
• Living Rooms
• Bedrooms
• Dining Rooms
• Guest Rooms

Functionality

Utilize the two tiers for various purposes:

• Top Surface: Ideal for displaying decorative items such as lamps, photo frames, vases, or for holding everyday essentials like keys and mail.
• Bottom Shelf: Provides additional storage and display space for books, magazines, small storage baskets, or plants.

Figure 3: The console table provides ample storage and display space for various items, enhancing the functionality and aesthetics of your living area.

Figure 4: The table's design allows for seamless integration into various spaces, from behind a sofa to an entryway, offering flexible styling options.

5. Maintenance and Care

Proper care will ensure the longevity and appearance of your console table.

• Cleaning: Wipe the smooth, flat surface with a damp or dry cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Spills: Immediately wipe up any spills to prevent staining or damage to the engineered wood.
• Sunlight and Heat: Avoid placing the table in direct sunlight or near heat sources, as this can cause fading or warping.
• Weight Distribution: Distribute weight evenly across the shelves to maintain stability and prevent stress on the structure.
• Fastener Check: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary.

Figure 5: Details of the table's construction, including the smooth coated surface for easy cleaning and stable legs.

6. Troubleshooting

If you encounter any issues with your ZenStyle console table, refer to the following common solutions:

If the problem persists or is not listed here, please contact ZenStyle customer service for assistance.

7. Product Specifications

Figure 6: Detailed product dimensions for the console table.

Figure 7: Key specifications including material, weight capacity, and dimensions.

8. Warranty and Customer Support

ZenStyle is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, we offer helpful customer service to address any concerns.

If you have any questions regarding product quality, assembly, missing parts, or any issues during use, please contact ZenStyle customer service. We aim for your satisfaction and guarantee easy and fast replacement for eligible issues.

For support, please refer to the contact information provided with your purchase or visit the official ZenStyle website.

Figure 8: ZenStyle is dedicated to customer satisfaction, offering support and replacements for product issues.