PetSafe ZPA00-17089

PetSafe Plastic Pet Door User Manual

Model: ZPA00-17089

Introduction

The PetSafe Plastic Pet Door provides a convenient and reliable solution for allowing your pet freedom to enter and exit your home. This door-mounted pet door is designed for easy installation in various door types, including wood, PVC, metal, and paneled doors. Its durable, rust-free plastic frame and weather-resistant flap ensure long-lasting performance and comfort for your pet.

Important Safety Information

Please read and understand all instructions in this user manual before installing or using the PetSafe Plastic Pet Door. Failure to follow these instructions may result in injury or damage.

Always supervise your pet during initial use to ensure they learn to use the door safely.
Ensure the pet door is securely installed to prevent accidental detachment.
Use the included closing panel to restrict pet access or secure your home when needed.
Keep small children away from the pet door opening to prevent injury.
Regularly inspect the pet door for any signs of wear or damage, especially the flap, and replace components as necessary.

Package Contents

Verify that all components are present before beginning installation:

Inner Frame
Outer Frame
Flexible Flap (pre-installed)
Closing Panel
Installation Hardware (screws, nuts)
Cutting Template

Setup and Installation

The PetSafe Plastic Pet Door is designed for easy installation into various door types. For detailed, step-by-step instructions, please refer to the official Installation Manual PDF linked in the "Further Resources" section.

Choosing the Right Size

It is crucial to select the correct size pet door for your animal. Measure your pet's height and width to ensure comfortable passage. The large size pet door is suitable for dogs weighing up to 100 lb, with flap dimensions of 10 1/4 inches wide by 16 1/4 inches high.

Image: PetSafe Pet Door Sizing Chart. This chart provides recommended pet door sizes based on pet width, height, and weight for Small, Medium, Large, and X-Large pet doors.

Installation Overview

The installation process generally involves marking the opening using the provided template, cutting the opening in your door, and then securing the inner and outer frames together through the door. The pet door is compatible with wood, PVC, metal, and paneled doors from 1/16 inch to 2 inches thick.

Image: PetSafe Pet Door with key dimensions. The image shows the overall height of 19 3/4 inches, overall width of 12 1/2 inches, and flap dimensions of 10 1/4 inches wide by 16 1/4 inches high.

Image: The PetSafe Plastic Pet Door, showing the assembled inner and outer frames with the flexible flap.

Operating the Pet Door

The PetSafe Plastic Pet Door operates with a simple, smooth-swinging flap that allows your pet free access. The flap is weather-resistant and designed for durability.

Using the Closing Panel

A lockable slide panel is included to control your pet's access and to secure your home. To engage the closing panel, slide it into the designated grooves on the inner frame until it snaps securely into place. To remove, gently pull the panel outwards from the bottom tabs and slide it up.

Image: Diagram highlighting key features of the PetSafe Pet Door, including the paintable frame, snap-on closing panel, flexible and tinted flap, and magnetic closure at the bottom of the flap.

Maintenance

Regular maintenance will ensure the longevity and proper function of your PetSafe Plastic Pet Door.

Cleaning: The vinyl flap is cleanable and removable. Use mild soap and water to clean the flap and frame as needed. Avoid abrasive cleaners that could damage the plastic.
Inspection: Periodically check the flap for cracks or tears. Ensure the magnetic closure at the bottom of the flap is free of debris and functions correctly. Inspect the frame for any loosening of screws or damage.
Replacement Parts: Replacement flaps and other components may be available from PetSafe if needed.

Troubleshooting

Problem	Possible Cause	Solution
Pet is hesitant to use the door.	Unfamiliarity, fear of the flap.	Encourage your pet with treats and praise. Hold the flap open initially, then gently guide them through. Gradually lower the flap as they become comfortable.
Flap does not close completely.	Debris in the magnetic strip, damaged flap, or misaligned frame.	Clean the magnetic strip at the bottom of the flap. Inspect the flap for damage and replace if necessary. Check that the door frame is installed squarely.
Drafts or water entering through the door.	Improper sealing during installation, worn weather stripping, or flap not sealing.	Ensure proper sealing around the frame during installation. Check the weather stripping on the flap and replace if worn. Verify the magnetic closure is functioning.
Closing panel is difficult to insert or remove.	Debris in grooves, misaligned frame, or panel inserted incorrectly.	Clean the grooves on the frame. Ensure the panel is inserted straight and aligned with the tabs.

Specifications

Brand	PetSafe
Model Number	ZPA00-17089
Size	Large
Flap Dimensions (W x H)	10 1/4" x 16 1/4"
Product Dimensions	2 x 14 x 22.38 inches
Item Weight	3.8 pounds
Weight Limit	Up to 100 Pounds
Frame Material	Plastic
Compatible Door Thickness	1/16" to 2"
Color	White
Closure Type	Snap (for closing panel)
UPC	729849170896

Warranty and Support

PetSafe products are designed with quality and durability in mind. For specific warranty information and customer support, please visit the official PetSafe website or contact their customer service department. Retain your proof of purchase for warranty claims.

For assistance, visit: www.petsafe.com

Further Resources

For a comprehensive guide on installation and detailed instructions, please download the official PDF manual:

Download PetSafe Plastic Pet Door Installation Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.