Introduction
The Sunbeam 3-in-1 Power Failure Night Light is a versatile lighting solution designed for convenience and safety. It functions as an automatic night light, an emergency power failure light, and a portable flashlight. Equipped with motion and photo sensors, it provides illumination when and where you need it most, adapting to various household needs.
Product Features
- 3-in-1 Functionality: Operates as a night light, power failure light, and integrated flashlight.
- Automatic Night Light: Utilizes a photo sensor to activate in low light conditions.
- Motion Sensor: Detects movement to provide illumination when entering a room or hallway.
- Color Changing LED: Offers a selection of colors for ambient lighting.
- Auto Dimming: Adjusts light intensity based on ambient light.
- Power Failure Light: Automatically illuminates during power outages, providing up to 16 hours of light.
- Integrated Flashlight: Detachable unit provides up to 5 hours of portable light.
- Light Output: 70 lumens with a range of 15 meters (49 feet) in flashlight mode.
Package Contents
Each package typically includes:
- Sunbeam 3-in-1 Power Failure Night Light units (quantity may vary, commonly sold in 3-packs).

Setup
- Unpacking: Carefully remove the night light units from their packaging.
- Placement: Select a standard 120V AC wall outlet in an area where ambient light is desired or where motion detection is beneficial (e.g., hallways, bathrooms, bedrooms). Ensure the outlet is easily accessible.
- Plug-in: Insert the night light firmly into the wall outlet. The unit will begin charging its internal battery for the flashlight function.
- Initial Charge: Allow the unit to charge for at least 24 hours before first use to ensure the internal battery is fully charged for optimal flashlight and power failure performance.
Operating Instructions
1. Automatic Night Light Mode
- When plugged into an outlet, the night light will automatically turn on in low light conditions due to its integrated photo sensor.
- The motion sensor will activate the light to a brighter setting when movement is detected within its range, then dim or turn off when no motion is detected for a period.
2. Color Changing Function
- The night light features multiple color options. To cycle through the available colors, gently press the button located on the side of the unit while it is plugged in.
- To select a specific color, press the button until your desired color is displayed. The light will remain on that color until changed again.
3. Integrated Flashlight Mode
- Detaching: To use as a flashlight, simply pull the unit out of the wall outlet. It will automatically switch to a bright white flashlight beam.
- Activation: If the flashlight does not immediately turn on, press the power button on the side of the unit.
- Recharging: To recharge, plug the unit back into a wall outlet.
4. Power Failure Light Mode
- In the event of a power outage, the night light will automatically illuminate, providing emergency lighting.
- The power failure light can provide illumination for up to 16 hours on a full charge.
Maintenance
- Cleaning: Disconnect the unit from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Battery Care: The internal NiMH battery is designed for long-term use. For optimal battery life, ensure the unit is regularly plugged in to maintain a charge. If stored for extended periods, periodically plug it in to recharge.
Troubleshooting
- Light not turning on: Ensure the unit is securely plugged into a working outlet. Check if the room is too bright for the photo sensor to activate the night light mode.
- Motion sensor not responding: Verify there are no obstructions blocking the sensor. Ensure the unit is placed in an area where motion can be detected effectively.
- Flashlight not working or holding charge: Ensure the unit has been plugged in for sufficient time to charge (at least 24 hours for initial charge). If the issue persists, the internal battery may need replacement (contact customer support).
- Color changing not working: Press the button firmly to cycle through colors. If stuck on one color, try unplugging and re-plugging the unit.
Specifications
| Specification | Detail |
|---|---|
| Model Number | 1600262 |
| Item Weight | 1.01 pounds |
| Product Dimensions | 11.61 x 1.73 x 11.73 inches |
| Type of Bulb | LED |
| Special Features | Color Changing, Dimmable, Motion Sensor |
| Battery Cell Type | NiMH (Internal Rechargeable) |
| Flashlight Lumens | 70 lumens |
| Flashlight Range | 15 meters (49 feet) |
| Flashlight Duration | Up to 5 hours |
| Power Failure Light Duration | Up to 16 hours |
Safety Information
- For indoor use only.
- Do not disassemble or attempt to repair the unit.
- Keep away from water and excessive moisture.
- Do not cover the unit when in operation.
- Ensure the unit is securely plugged into a properly functioning electrical outlet.
Warranty and Support
Sunbeam products are manufactured to high-quality standards. For warranty information, technical support, or customer service inquiries, please refer to the warranty card included with your product or visit the official Sunbeam website. Please have your model number (1600262) available when contacting support.





