1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Globo 17006S Matte Black LED Pendant Light. Please read these instructions carefully before installation and retain them for future reference. Proper installation by a qualified electrician is recommended to ensure safety and optimal performance.
2. Safety Information
- Always disconnect the power supply at the main circuit breaker before installation, maintenance, or cleaning.
- This product is designed for indoor use only.
- Ensure the mounting surface can support the weight of the fixture.
- Do not modify the fixture or its components. Any modifications may void the warranty and create safety hazards.
- Handle the fixture with care to avoid damage to the LED components.
- Consult a qualified electrician if you are unsure about any part of the installation process.
3. Package Contents
Verify that all components are present and undamaged before beginning installation.
- 1 x Globo 17006S LED Pendant Light Fixture (with integrated LED)
- 1 x Mounting Bracket
- Mounting Hardware (screws, anchors, wire connectors)
- 1 x Instruction Manual
Image: The Globo 17006S LED Pendant Light fixture, showcasing its matte black finish and linear design.
4. Setup and Installation
4.1 Tools Required (Not Included)
- Phillips head screwdriver
- Wire strippers
- Drill (if needed for mounting anchors)
- Ladder
4.2 Installation Steps
- Turn off Power: Locate the circuit breaker controlling the light fixture's power supply and turn it off. Verify power is off using a voltage tester.
- Prepare Mounting Surface: If replacing an existing fixture, carefully remove it. Ensure the junction box is securely mounted and capable of supporting the new fixture's weight.
- Attach Mounting Bracket: Secure the provided mounting bracket to the junction box using the screws provided. Ensure it is firmly attached.
- Adjust Suspension Cables: The pendant light features adjustable suspension cables. Determine the desired hanging height and adjust the cables accordingly. Ensure both cables are of equal length for a level installation.
- Wire Connections: Carefully connect the electrical wires. Match the live (usually black or brown) wire from the fixture to the live wire from the ceiling, the neutral (usually white or blue) wire from the fixture to the neutral wire from the ceiling, and the ground (usually green/yellow or bare copper) wire from the fixture to the ground wire from the ceiling. Use the provided wire connectors and ensure all connections are secure.
- Mount Fixture: Carefully lift the pendant light fixture and attach it to the mounting bracket, securing it with the provided screws. Ensure no wires are pinched during this process.
- Restore Power: Once the fixture is securely installed and all connections are checked, restore power at the circuit breaker.
Image: The Globo 17006S LED Pendant Light installed above a dining table, demonstrating its linear design and ambient lighting.
5. Operating Instructions
The Globo 17006S LED Pendant Light is operated via a standard wall switch. Simply toggle the wall switch to turn the light on or off. This fixture does not support dimming unless connected to a compatible LED dimmer switch (sold separately) and installed by a qualified electrician.
6. Maintenance
6.1 Cleaning
To clean the fixture, ensure the power is off. Use a soft, dry, or slightly damp cloth to wipe the surfaces. Do not use abrasive cleaners, solvents, or polishes as these can damage the finish and electrical components.
6.2 LED Light Source
The Globo 17006S features an integrated LED light source. The LED is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced. Contact a qualified electrician or the manufacturer for assistance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty wall switch. | Check the circuit breaker and ensure power is on. Verify all wire connections are secure (with power off). Test the wall switch or consult an electrician. |
| Light flickers. | Loose wiring connection. Incompatible dimmer switch (if applicable). | Check all wire connections (with power off). Ensure a compatible LED dimmer switch is used, or remove the dimmer. |
| Light is dim. | Incompatible dimmer switch (if applicable). Incorrect voltage supply. | Ensure a compatible LED dimmer switch is used, or remove the dimmer. Verify the fixture is connected to the correct voltage (230V). |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 17006S |
| Brand | GLOBO |
| Material | Metal, Plastic |
| Color | Matte Black |
| Shade Color | White Opal |
| Dimensions (L x W x H) | 121 x 8 x 120 cm (47.6 x 3.1 x 47.2 inches) |
| Item Weight | 1.35 kg (2.98 lbs) |
| Light Source | Integrated LED |
| Number of Bulbs | 1 (integrated LED module) |
| Max Wattage | 40 Watts |
| Voltage | 230 Volts |
| Luminous Flux (Source) | 2840 lumens |
| Luminous Flux (Output) | 1970 lumens |
| Color Temperature | 3000 Kelvin (Warm White) |
| Energy Efficiency Label | A |
| Power Source | AC |
9. Warranty and Support
Specific warranty information for the Globo 17006S LED Pendant Light is not provided in the product details. Availability of spare parts and software updates is also not specified. For warranty claims, technical support, or inquiries regarding spare parts, please contact your retailer or the manufacturer directly. Always retain your proof of purchase for any warranty-related requests.
