HOROW HT1000

Download PDF
Contents

HOROW HT1000 Dual Flush One Piece Toilet User Manual

Model: HT1000 | Brand: HOROW

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your HOROW HT1000 Dual Flush One Piece Toilet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.

HOROW HT1000 Dual Flush One Piece Toilet

Image 1.1: The HOROW HT1000 Dual Flush One Piece Toilet, showcasing its compact design.

2. Product Specifications

FeatureDetail
ModelHT1000
BrandHOROW
ColorWhite (Chrome Button)
Product Dimensions25"D x 13.1"W x 28.3"H
MaterialPorcelain, Ceramic
Item Weight86 Pounds
Installation TypeFloor Mounted
ShapeRound
Seat Material TypePP (Polypropylene)
Rough-In12 Inches (Standard)
Water Consumption1.28 Gallons per Flush (1.1 GPF light, 1.6 GPF full)
CertificationscUPC, UPC, WaterSense, CEC compliant
Included ComponentsInstallation Instruction, Installation Parts, Pre-installed Water Fitting, Toilet Seat, Wax Ring
HOROW HT1000 Toilet Dimensions Diagram

Image 2.1: Detailed dimensions for the HOROW HT1000 toilet, showing a 12-inch rough-in.

3. Setup and Installation

The HOROW HT1000 toilet is designed for straightforward installation. It is a floor-mounted unit with a standard 12-inch rough-in. The package includes all necessary components for installation.

3.1 Pre-Installation Checklist

  • Ensure you have the correct 12-inch rough-in measurement from the wall to the center of the drain pipe.
  • Verify your waterline connection is a U.S. standard 7/8'' size. An adapter for 1/2'' waterline is pre-installed.
  • Confirm all included components are present: toilet, soft-closing toilet seat, pre-installed flush valve, high-quality wax ring, floor bolts, and installation instructions.

3.2 Installation Steps (Overview)

For detailed step-by-step instructions, refer to the separate installation guide included in your package. The following is a general overview:

  1. Prepare the floor flange and ensure the area is clean and level.
  2. Install the wax ring onto the toilet's outlet or directly onto the floor flange.
  3. Carefully position the toilet over the floor bolts and press down firmly to create a seal with the wax ring.
  4. Secure the toilet to the floor using the provided floor bolts and caps.
  5. Connect the water supply line to the pre-installed water fitting.
  6. Install the soft-closing toilet seat using the quick-release hinges.
Inlet Valve Suggested Location for HOROW HT1000 Toilet

Image 3.1: Illustration of the suggested inlet valve location for optimal installation.

Toilet Seat Installation Guide

Image 3.2: Step-by-step guide for installing and removing the toilet seat.

The toilet features two large installation access points on the side, designed to simplify the installation process for plumbers and DIY enthusiasts.

4. Operating Instructions

The HOROW HT1000 features a highly efficient dual-flush system designed to conserve water without compromising performance.

4.1 Dual Flush Mechanism

The toilet is equipped with a dual-flush button located on top of the tank. This mechanism offers two flushing options:

  • Light Flush: Press the smaller button for a 1.1-gallon flush, suitable for liquid waste.
  • Full Flush: Press the larger button for a 1.6-gallon flush, designed for solid waste.

The average water consumption is 1.28 gallons per flush, contributing to water savings.

Dual Flush Button on HOROW HT1000 Toilet

Image 4.1: Close-up of the dual flush button on the toilet tank lid.

Powerful Flushing Action of HOROW HT1000 Toilet

Image 4.2: Visual representation of the powerful flushing action within the toilet bowl.

5. Maintenance and Cleaning

Regular maintenance and cleaning will ensure the longevity and hygienic performance of your HOROW HT1000 toilet.

5.1 Easy Cleaning Design

The toilet features a fully skirted trapway design and self-cleaning materials, which minimize corners and grooves where dirt can accumulate. This design facilitates easier cleaning compared to traditional toilets.

Skirted Design for Easy Cleaning

Image 5.1: Diagram illustrating the skirted design that simplifies cleaning.

5.2 Soft-Closing and Quick-Release Seat

The high-end PP seat includes a stainless steel durable hinge and a soft-closing mechanism to prevent slamming and reduce noise. The quick-release feature allows for easy removal of the seat, facilitating thorough cleaning of both the seat and the toilet bowl.

Soft-Closing Toilet Seat Mechanism

Image 5.2: Depiction of the soft-closing function of the toilet seat, ensuring quiet operation.

Quick-Release Toilet Seat for Easy Cleaning

Image 5.3: Instructions for using the quick-release hinges to remove the toilet seat for cleaning.

5.3 Cleaning Recommendations

  • Use mild, non-abrasive cleaners and a soft cloth or sponge.
  • Avoid harsh chemicals, abrasive pads, or strong acids, as these can damage the ceramic finish and seat material.
  • Regularly clean the exterior, interior bowl, and seat.
  • For hard water stains, use a cleaner specifically designed for toilet bowls, following the product's instructions.

6. Troubleshooting

This section addresses common issues you might encounter with your HOROW HT1000 toilet. For problems not listed here, please contact customer support.

ProblemPossible CauseSolution
Toilet does not flush completely or water level is low.
  • Insufficient water in the tank.
  • Flapper/flush valve not sealing properly.
  • Obstruction in the trapway.
  • Check the water supply valve is fully open.
  • Adjust the fill valve to ensure the water level reaches the fill line in the tank.
  • Inspect the flush valve for any obstructions or wear.
  • Use a toilet plunger to clear any clogs.
Toilet runs continuously or cycles on and off.
  • Flapper/flush valve not sealing.
  • Fill valve malfunction.
  • Float ball/cup not set correctly.
  • Ensure the flapper/flush valve chain has proper slack and the flapper seats correctly.
  • Check the fill valve for debris or damage.
  • Adjust the float to ensure it's not too high, causing water to overflow into the overflow tube.
Toilet seat feels loose or moves.
  • Mounting bolts are loose.
  • Hinges are not properly secured.
  • Tighten the mounting bolts for the toilet seat. Refer to Image 3.2 for seat installation.
  • Ensure the quick-release hinges are fully engaged.
Water leaks from the base of the toilet.
  • Improper wax ring seal.
  • Loose floor bolts.
  • Cracked toilet base.
  • Tighten floor bolts (do not overtighten).
  • If the leak persists, the toilet may need to be removed and the wax ring replaced.
  • Inspect the toilet for visible cracks. If cracked, replacement is necessary.

7. Warranty and Support

HOROW is committed to providing quality products and customer satisfaction.

7.1 Product Warranty

The HOROW HT1000 Dual Flush One Piece Toilet comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use and service.

7.2 After-Sales Service

HOROW offers lifetime after-sales service for this product. If you encounter any issues or require assistance, please contact our customer service center. We aim to respond to all inquiries within 12 hours.

For support, please refer to the contact information provided with your purchase documentation or visit the official HOROW website.

8. Additional Information

The compact design of the HOROW HT1000 makes it suitable for small bathrooms, powder rooms, and children's bathrooms, providing comfort without occupying excessive space.

Comparison of Standard Toilet vs. HOROW Short Toilet

Image 8.1: Visual comparison highlighting the space-saving benefits of the HOROW short toilet design.

Note: No official product videos with specified creator type or preview information were available in the provided data to embed.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.