Full Shine Balayage Tape in Hair Extensions User Manual

Introduction

This manual provides detailed instructions for the proper application, care, and maintenance of your Full Shine Balayage Tape in Human Hair Extensions. These extensions are designed to add volume and length, featuring a natural texture and reusable tape for ease of use. Please read all instructions carefully before installation to ensure optimal results and longevity of your extensions.

Image: Full Shine Balayage Tape in Hair Extensions, showcasing the installed look and individual tape wefts.

Product Features

• Real Human Hair: Can be styled with natural texture, healthy and bouncy.
• Reusable Tape: Easy to wear and remove, with tape color similar to hair for invisibility.
• Strong Adhesion: Tape is designed for long-lasting hold, not easy to fall out.
• Quantity: 20 pieces per pack. Recommended 1-2 packs for thick hair, 3-4 packs for fine hair.
• Weight: 30 grams for 10-12 inch, 50 grams for 14-24 inch.

Image: Diagram highlighting features of real human hair extensions, including natural texture and bounce.

Image: Illustration of the reusable tape feature, emphasizing ease of use and strong adhesion.

Image: Information on the number of pieces per pack and recommended quantities based on hair thickness.

Setup and Application (How to Wear)

Proper application is key to the longevity and natural look of your tape-in extensions. Follow these steps carefully:

Image: Visual guide detailing the 5-step application process for tape-in hair extensions.

1. Prepare Hair: Ensure your hair is clean, dry, and free of any oils or conditioners.
2. Part Hair: Put your hair horizontally and select the section where you intend to place the extension.
3. Expose Tape: Remove the white cover on the tape extension to expose the super tape adhesive.
4. Apply First Weft: Place the extension underneath your hair with the tape facing up.
5. Apply Second Weft: Place another extension exactly on top of the same position, sandwiching your natural hair between two tape wefts.
6. Secure: Press the tape wefts firmly in place with your fingertips for at least 5-10 seconds to secure the hold.
7. Seal (Optional): For enhanced security, use a flat iron on a low heat setting over the taped area. Ensure the heat is low to avoid damaging the tape or hair.

Image: Detailed visual instructions on how to wear tape-in hair extensions, showing the sandwich method.

Operating and Care

General Care Tips

• Washing: Wash extensions gently with sulfate-free shampoo and conditioner. Avoid scrubbing the tape area. Wash in a downward motion.
• Drying: Gently pat dry with a towel. Air drying is recommended. If using a blow dryer, use a low heat setting.
• Brushing: Use a soft-bristle brush or a loop brush designed for extensions. Start from the ends and work your way up, holding the roots to prevent pulling.
• Sleeping: Braid your hair loosely or tie it in a low ponytail before sleeping to prevent tangling.
• Swimming/Exercise: Minimize exposure to chlorine and saltwater. Always wash extensions immediately after swimming.

Styling

Full Shine extensions are made from real human hair, allowing for versatile styling. You can dye, perm, or curl them to match your desired look.

• Heat Styling: When using heat tools (flat irons, curling irons), ensure the temperature is under 160°C (320°F) to prevent damage to the hair and tape. Always use a heat protectant spray.
• Coloring: If dyeing, it is recommended to have a professional colorist perform the service to ensure even results and prevent damage. Always perform a strand test first.

Image: Guide on identifying real human hair and its ability to be dyed, permed, and curled, with a heat styling temperature warning.

Maintenance

Re-taping and Replacement

It is recommended to re-tape your extensions every 4-6 weeks, depending on hair growth and tape adhesion. The tape is replaceable.

Image: Instructions on correct tape usage, advising against folding and recommending cutting into two pieces if necessary.

Image: Step-by-step guide on how to replace the tape on your hair extensions.

1. Peel Off Backing: Carefully peel off the white backing from the new tape.
2. Align Tape: Match the new tape to the hair extension, aligning it from corner to corner.
3. Press Firmly: Press firmly so the tape adheres securely to the hair extension.
4. Apply: Peel the hair with the new tape and apply as per the application instructions.

Removal

To remove extensions without damaging your natural hair, follow these steps:

Image: Visual instructions for safely removing tape-in hair extensions.

1. Apply Remover: Use a professional product designed for taking out tape extensions. Apply it to the contact part of the hair and tape.
2. Wait: Allow the remover to sit for approximately one minute to dissolve the adhesive.
3. Gently Peel: Gently peel off the tape. Do not tear the tape too hard, as this might pull your own hair.
4. Clean Hair: After removal, wash your own hair to keep it clean. You can then replace with new tapes or reapply the extensions with fresh tape.

Troubleshooting

Specifications

Image: Visual representation of hair extension lengths from 10 to 24 inches.

Warranty and Support

Full Shine is committed to providing high-quality products. For any questions, concerns, or professional services regarding your hair extensions, please contact Full Shine customer support directly.

While specific warranty details are not provided in this manual, issues related to product defects or dissatisfaction should be directed to the seller for assistance with replacement or resolution.

Image: Information encouraging users to contact Full Shine for professional services and replacement.

You can visit the official Full Shine store on Amazon for more information and contact options: Full Shine Store