Introduction
Thank you for choosing the EUGAD 0666BY-2 Swivel Bar Stools. This instruction manual provides essential information for the safe assembly, proper operation, and effective maintenance of your new bar stools. Please read this manual thoroughly before assembly and retain it for future reference.
Image: Two EUGAD 0666BY-2 Anthracite Swivel Bar Stools, showcasing their design and color.
Product Features
The EUGAD 0666BY-2 bar stools are designed for comfort and versatility, featuring:
- Adjustable Height: Easily adjust the seat height to your preferred position using the lever.
- 360° Swivel: The seat can rotate a full 360 degrees for convenience and flexibility.
- Ergonomic Backrest: Designed with a comfortable backrest for support.
- Practical Footrest: An integrated footrest provides additional comfort.
- Stable Base: Equipped with a sturdy base for stability.
- Durable Material: Seat upholstered in faux leather, which is waterproof, soft, and wear-resistant.
- Versatile Use: Suitable for various settings including home bars, kitchens, cafes, bistros, and restaurants.
Image: Illustration highlighting the 360-degree swivel and adjustable seat height functions of the bar stool.
Image: Detailed view of the faux leather material, emphasizing its waterproof, soft, and wear-resistant characteristics.
Image: Visual representation of the bar stool's ergonomic backrest, practical footrest, and stable base design.
Setup and Assembly
Please ensure all components are present before beginning assembly. It is recommended to assemble the stools on a soft, clean surface to prevent scratches.
Components Checklist:
- Seat with backrest (1x per stool)
- Gas lift cylinder (1x per stool)
- Footrest ring (1x per stool)
- Base plate (1x per stool)
- Assembly hardware (screws, washers, Allen key - typically included)
Assembly Steps:
- Attach Seat to Gas Lift: Secure the seat to the top of the gas lift cylinder. Ensure it is firmly seated.
- Install Footrest: Slide the footrest ring onto the gas lift cylinder.
- Connect Base: Insert the bottom of the gas lift cylinder into the center hole of the base plate. Ensure the base is stable and level.
- Final Check: Verify all connections are secure and the stool is stable before use.
Image: Exploded view diagram showing the main components of the bar stool and their assembly order.
Operating Instructions
Height Adjustment:
To adjust the seat height, locate the lever positioned under the seat.
- To raise the seat: While standing, pull the lever upwards. The seat will automatically rise. Release the lever when the desired height is reached.
- To lower the seat: While seated, pull the lever upwards. The seat will lower under your weight. Release the lever when the desired height is reached.
360° Swivel Function:
The seat is designed to rotate freely 360 degrees. Simply turn the seat in any direction to adjust your orientation.
Maintenance
Regular maintenance will help prolong the life and appearance of your bar stools.
- Cleaning the Faux Leather: Wipe the faux leather surface with a soft, damp cloth. For stubborn stains, use a mild soap solution and immediately wipe dry. Avoid abrasive cleaners or solvents, as these can damage the material.
- Cleaning the Steel Base: Clean the steel base and footrest with a soft, dry cloth. For smudges or dirt, a slightly damp cloth can be used, followed by immediate drying to prevent water spots.
- Checking Connections: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.
- Avoid Overloading: Do not exceed the maximum weight capacity of the stool.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool is wobbly or unstable. | Loose connections or uneven floor. | Check and tighten all screws. Ensure the stool is on a flat, even surface. |
| Difficulty adjusting seat height. | Gas lift mechanism obstruction or malfunction. | Ensure the lever is fully engaged. Check for any obstructions around the gas lift. If the issue persists, contact customer support. |
| Squeaking noise during swivel or adjustment. | Lack of lubrication or loose components. | Apply a small amount of silicone-based lubricant to moving parts. Check and tighten all connections. |
Specifications
- Model: 0666BY-2
- Brand: EUGAD
- Color: Anthracite
- Seat Material Type: Faux Leather
- Frame Material: Alloy Steel
- Total Height: 84-116 cm (adjustable)
- Seat Height: 61.5-83.5 cm (adjustable)
- Seat Dimensions: 35 cm (depth) x 42 cm (width)
- Backrest Height: 25 cm
- Base Diameter: 41.5 cm (inferred from diagram)
- Product Dimensions (L x W x H): 42 x 35 x 106 cm (maximum height)
- Item Weight: 16.2 Kilograms (for the set of 2 stools)
- Features: With backrest, Swivel, Adjustable, Armless
- Style: Modern
- Country of Origin: China
Image: Technical drawing displaying the various dimensions of the bar stool, including height, seat, and base measurements.
Warranty and Support
Specific warranty details are not explicitly provided in the product information. For any questions regarding warranty, replacement parts, or technical support, please contact the seller directly through your purchase platform.
Please note that information regarding the availability of spare parts is not provided.