AMERICAN PHOENIX 10x15 Pop Up Tent Instruction Manual

Introduction

Thank you for choosing the AMERICAN PHOENIX 10x15 Pop Up Tent. This instant canopy is designed for commercial, outdoor, and party use, providing reliable shade and shelter. This manual provides detailed instructions for safe setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tent.

Image: The AMERICAN PHOENIX 10x15 Pop Up Tent providing shade over a market stall, demonstrating its large coverage area and suitability for outdoor events.

Safety Information

Please read and understand all safety warnings and instructions before setting up or using the tent. Failure to follow these instructions may result in injury or damage to the product.

• Always set up the tent on a flat, stable surface.
• Secure the tent properly using stakes and ropes (not included, but highly recommended) to prevent it from being lifted by wind.
• Do not use the tent in severe weather conditions, including strong winds, heavy rain, or snow. Disassemble and store the tent during such conditions.
• Keep all flame and heat sources away from the tent fabric. The fabric is water-resistant but not fireproof.
• Ensure all frame components are fully extended and locked into place before use.
• Supervise children around the tent, especially during setup and takedown.
• Avoid collecting rainwater on the canopy. If water accumulates, gently push up from underneath to release it.

Components List

The package includes the following components:

• 1 x 10x15 Pop Up Tent Frame (Steel frame with white matte powder coating)
• 1 x 10x15 Canopy Top (420D Polyester with PU coating)

Note: Sidewalls and carry bag are not included and must be purchased separately if desired.

Image: A detailed diagram of the tent frame, highlighting key features such as reinforced carbon steel pins, double layer connectors, scratch-free tower plugs, thickened bottom plates, reinforcement center poles, and hand guard buttons for injury prevention.

Setup Instructions

Setting up your AMERICAN PHOENIX Pop Up Tent is a straightforward process, ideally requiring two people for ease and safety.

Step 1: Unpack and Position the Frame

1. Remove the tent frame from its packaging.
2. Place the folded frame in the desired setup location.
3. With a person at each end, gently pull the frame outwards, partially extending it.

Image: The tent frame in its partially folded state with the canopy top already draped over it, ready for full extension.

Step 2: Attach the Canopy Top

1. Unfold the canopy top and place it over the partially extended frame. Ensure the corners of the canopy align with the corners of the frame.
2. Secure the canopy to the frame using the Velcro straps located on the underside of the canopy.
3. Ensure the canopy is centered and taut on the frame.

Image: A close-up view of the canopy fabric, showing the durable 420D Polyester material with PU coating and the AMERICAN PHOENIX brand tag.

Step 3: Fully Extend the Frame

1. From opposite sides, continue to pull the frame outwards until it is fully extended.
2. Push up on the center truss bars until they click into place, locking the frame in its open position.
3. Ensure all cross-bars are fully extended and locked.

Image: An interior view of the tent's truss system, demonstrating the full extension and interlocking mechanism of the frame for stability.

Step 4: Adjust Height and Secure Legs

1. Press the push buttons on each of the four legs to adjust the tent to your desired height. There are 4 adjustable height options.
2. Ensure each leg is securely locked at the chosen height.
3. For maximum stability, use stakes (not included) to anchor the tent legs to the ground. Attach ropes to the canopy corners and stake them down at an angle.

Image: A technical diagram illustrating the tent's dimensions (10x15FT) and the four adjustable height settings for both maximum peak height (115-124 inches) and maximum valance clearance height (70-79 inches).

Operating the Tent

Adjusting Height

To adjust the height of the tent, locate the push buttons on each leg. Simultaneously press the buttons and slide the inner leg up or down to the desired height setting. Ensure all four legs are set to the same height and are securely locked before use.

Image: A hand demonstrating the use of the injury-proof button for easy height adjustment, highlighting the design for user comfort and safety.

Takedown and Storage

1. Lower the tent to its lowest height setting by pressing the leg buttons.
2. Release the center truss locks by gently pushing down on the center of the frame until it disengages.
3. With a person at each end, push the frame inwards to collapse it.
4. Remove the canopy top and fold it neatly.
5. Fold the frame completely. Store both the frame and canopy in a dry, cool place, preferably in a carry bag (if purchased separately).

Maintenance

• Cleaning: Clean the canopy fabric with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Allow the fabric to air dry completely before folding and storing to prevent mildew.
• Frame Care: Wipe down the steel frame with a damp cloth to remove dirt and debris. Ensure the frame is dry before storage to prevent rust. The frame is rust and corrosion resistant, but proper care extends its lifespan.
• Storage: Store the tent in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect all components for signs of wear, damage, or loose connections. Replace any damaged parts immediately.

Image: An illustration highlighting the UV-proof and waterproof properties of the canopy's PU coating, designed to shield from sun and water.

Troubleshooting

Specifications

• Brand: AMERICAN PHOENIX
• Model Number: 10X15WH
• Product Dimensions: 170"L x 115"W x 125"H (10x15FT footprint)
• Coverage Area: Approximately 150 square feet
• Frame Material: Steel (with white matte powder coating), Alloy Steel poles
• Canopy Material: 420D Polyester with PU coated
• Water Resistance Level: Waterproof
• Ultraviolet Light Protection: 0.99 (99%)
• Adjustable Heights: 9.5 ft - 9.8 ft - 10.1 ft - 10.4 ft (Maximum Peak Height)
• Assembly Required: Yes

Warranty and Support

AMERICAN PHOENIX is committed to providing high-quality products. For any questions, concerns, or support needs regarding your 10x15 Pop Up Tent, please contact the manufacturer directly.

While specific warranty details are not provided in this manual, please refer to your purchase documentation or the seller's information for any applicable warranty coverage. Protection plans may also be available for purchase separately to extend coverage.

For additional information or to purchase accessories like sidewalls or a carry bag, please visit the official AMERICAN PHOENIX store or contact your retailer.

Manufacturer: AMERICAN PHOENIX

For customer service, please refer to the contact information provided at the point of purchase or on the product packaging.