Aqua Vista 22-B42CPL-BN-AV Bathroom Sink Faucet User Manual

Introduction

This manual provides instructions for the Aqua Vista 22-B42CPL-BN-AV Bathroom Sink Faucet. This two-handle faucet features an integrated LED light that activates with water flow and a brushed nickel finish. It is designed for bathroom sink applications and includes a pop-up drain assembly.

Product Features

• LED Light: Water flow activates the integrated LED light, requiring no batteries.
• Two-Handle Design: Separate handles for hot and cold water provide precise temperature control.
• High Arc Spout: Offers ample space for hand washing.
• Brushed Nickel Finish: Durable and aesthetically pleasing finish.
• Lead-Free Brass Construction: Ensures product durability and water safety.
• Ceramic Cartridges: Designed for drip-free performance.
• Included Pop-Up Drain: Completes the sink installation.

The Aqua Vista faucet in brushed nickel finish, with its integrated LED light illuminating the water stream.

A close-up view of the Aqua Vista faucet, emphasizing the LED light feature and the brushed nickel finish.

Setup and Installation

This faucet is designed for installation on 1 or 3-hole deck-mounted sinks. A deck plate is included to accommodate 3-hole configurations. It is recommended to consult a qualified plumber for installation to ensure proper function and compliance with local codes.

Included Components:

• Lavatory Faucet Assembly
• Deck Plate (for 3-hole installation)
• Pop-Up Drain Assembly
• Mounting Hardware
• Flexible Supply Lines

All components required for faucet installation.

Operating Instructions

1. Water Flow Activation: Turn the hot or cold water handle to initiate water flow. The integrated LED light will automatically illuminate when water is flowing.
2. Temperature Control: Use the left handle for hot water and the right handle for cold water. Adjust both handles to achieve the desired water temperature.
3. Spout Swivel: The high arc spout can be swiveled to direct water flow as needed.
4. LED Light Operation: The LED light is powered by the water flow itself and does not require batteries or external power. It will turn off automatically when the water flow stops.

Maintenance

• Cleaning the Finish: To maintain the brushed nickel finish, clean regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Hard Water Deposits: For areas with hard water, mineral deposits may accumulate on the faucet or LED component. Use a mild descaling solution or a mixture of vinegar and water to gently clean these areas. Ensure to rinse thoroughly after cleaning.
• Ceramic Cartridges: The faucet is equipped with durable ceramic cartridges designed for long-lasting, drip-free operation. If a leak occurs, contact a qualified plumber for repair or replacement of the cartridge.

Troubleshooting

If you encounter issues with your Aqua Vista faucet, refer to the following common troubleshooting steps:

• No Water Flow or Low Pressure:
  • Check if the water supply valves under the sink are fully open.
  • Inspect the aerator for clogs or debris. Unscrew the aerator and clean it if necessary.
  • Verify that the main water supply to your home is active.
• LED Light Not Activating:
  • Ensure sufficient water flow. The LED light requires a certain water pressure to activate.
  • Check for any obstructions in the spout that might impede water flow or the LED mechanism.
  • If the issue persists, contact customer support for assistance.
• Leaking Faucet:
  • Tighten any loose connections at the base of the faucet or supply lines.
  • If the leak is from the handles or spout, the ceramic cartridges may need inspection or replacement by a qualified professional.

Specifications

An annotated diagram detailing the material finish, eco-conscious low flow design, LED light activation by water flow, and overall function and beauty of the faucet.

Aqua Vista products are certified lead-free, ensuring water safety and quality.

Warranty and Support

Aqua Vista products are manufactured to meet regional, national, and international industry standards, including NSF/ANSI 61 and NSF/ANSI 372 for lead-free compliance. For specific warranty information, product support, or to inquire about replacement parts, please contact the manufacturer, Homewerks Worldwide, LLC. Refer to the product packaging or the manufacturer's official website for contact details.