LEDMO 300W LED Parking Lot Light with Photocell (Model LED298)

1. Product Overview

The LEDMO 300W LED Parking Lot Light (Model LED298) is designed for outdoor commercial and area lighting applications. It features a high-efficiency LED light source, a dusk-to-dawn photocell for automatic operation, and a durable aluminum housing with a slip fitter mounting arm. This manual provides essential information for safe installation, operation, and maintenance.

Figure 1: LEDMO 300W LED Parking Lot Light with Slip Fitter Mount. This image shows the overall design of the LED parking lot light, including the main light fixture and the slip fitter mounting arm.

2. Safety Information

• Always disconnect power before installation, maintenance, or repair.
• Installation should be performed by a qualified electrician in accordance with national and local electrical codes.
• Ensure the mounting structure can support the weight of the fixture.
• Do not operate the fixture if any part is damaged.
• Avoid direct eye exposure to the light source when illuminated.

3. Installation

The LEDMO 300W LED Parking Lot Light is designed for slip fitter mounting on round or square poles. The mounting arm allows for 180-degree angle adjustment.

3.1 Components Included

• LED Parking Lot Light Fixture
• Slip Fitter Mounting Arm
• Dusk-to-Dawn Photocell (pre-installed)
• Mounting Hardware (screws, washers)

3.2 Installation Steps

1. Secure the Slip Fitter: Attach the slip fitter mounting arm to the pole (round or square) using the provided hardware. Ensure it is securely fastened. The recommended pole size for the slip fitter is 2.5 inches.
2. Wiring: Connect the fixture's wiring to the power supply in a junction box. Ensure proper grounding (Live, Neutral, Earth wires).
3. Mount the Light Fixture: Slide the LED light fixture onto the slip fitter arm and tighten the screws to secure it in place.
4. Adjust Angle: Adjust the angle of the light fixture as needed (up to 180 degrees) to achieve the desired illumination coverage. Tighten all adjustment screws to lock the position.

Figure 2: Slip Fitter Mounting Installation Steps. This diagram illustrates the three-step process for installing the light fixture onto a pole using the slip fitter mount, including wiring connections.

Figure 3: Typical Installation Height and Coverage. This image provides guidance on optimal installation heights and corresponding illumination coverage for different wattage lights, including the 300W model.

4. Operating Instructions

The LEDMO 300W LED Parking Lot Light is equipped with a dusk-to-dawn photocell sensor for automatic operation.

4.1 Automatic Operation (Dusk-to-Dawn)

• The integrated photocell sensor detects ambient light levels.
• When ambient light falls below a certain threshold (e.g., at dusk), the light fixture will automatically turn ON.
• When ambient light rises above a certain threshold (e.g., at dawn), the light fixture will automatically turn OFF.
• Ensure the photocell is not obstructed by any objects to guarantee proper function.

Figure 4: Dusk to Dawn Photocell. This image highlights the photocell sensor and its function in automatically turning the light on at dusk and off at dawn.

Figure 5: Photocell Operation Diagram. This diagram illustrates how the photocell detects light levels throughout the day to control the light's on/off state, optimizing energy usage.

5. Maintenance

The LEDMO 300W LED Parking Lot Light is designed for minimal maintenance due to its durable construction and efficient heat dissipation.

5.1 Cleaning

• Periodically clean the lens and housing with a soft, damp cloth to remove dirt, dust, or debris that may accumulate and affect light output or photocell function.
• Do not use abrasive cleaners or solvents.

5.2 Inspection

• Regularly inspect the fixture for any signs of damage, loose connections, or wear.
• Check the mounting hardware for tightness.

5.3 Heat Dissipation and Waterproofing

The fixture features a hollow-out heat sink design for efficient heat dissipation, contributing to a longer lifespan. Its IP65 waterproof rating ensures protection against dust and water jets, making it suitable for various outdoor weather conditions.

Figure 6: Heat Dissipation Design. This image illustrates the hollow-out heat sink design of the light fixture, which ensures efficient cooling and extends the product's lifespan.

Figure 7: IP65 Waterproof Rating. This image demonstrates the light's IP65 waterproof capability, ensuring reliable performance in various outdoor weather conditions like rain and snow.

6. Troubleshooting

If you encounter issues with your LEDMO Parking Lot Light, refer to the following common troubleshooting steps:

• Light does not turn ON:
  • Check the power supply and circuit breaker.
  • Ensure all wiring connections are secure.
  • Verify the photocell is not obstructed and is receiving sufficient ambient light (if it's daytime, it should be off).
• Light stays ON during the day:
  • Check if the photocell is obstructed by any object (e.g., leaves, debris, nearby artificial light sources).
  • Ensure the photocell is clean.
• Light flickers:
  • Check for loose wiring connections.
  • Ensure the voltage supply is stable and within the specified range (110 Volts).
• Reduced brightness:
  • Clean the light lens to remove any dirt or grime.
  • Verify the power supply is adequate.

If the issue persists after following these steps, please contact LEDMO customer support.

7. Specifications

8. Warranty

The LEDMO 300W LED Parking Lot Light comes with a 5-Year Seller Warranty. This warranty covers defects in materials and workmanship under normal use and service conditions. Please retain your proof of purchase for warranty claims.

9. Support

For technical assistance, warranty claims, or any other inquiries, please contact LEDMO customer support. You can find contact information on the official LEDMO website or through your purchase platform.

Manufacturer: targetlighting

Brand Store: Visit the LEDMO Store on Amazon