GearLight GL-35RRLR

GearLight Radiance 3.5" Ring Light Instruction Manual

Model: GL-35RRLR

Introduction

The GearLight Radiance 3.5" Ring Light is a versatile, rechargeable LED lighting solution designed to enhance your appearance during video calls, online meetings, and content creation. Its compact size and clip-on design make it suitable for use with various devices, including phones, laptops, tablets, and desktop monitors. This manual provides essential information for the proper setup, operation, and care of your device.

GearLight Radiance 3.5 inch Ring Light clipped onto a laptop

Image: The GearLight Radiance 3.5" Ring Light in use, clipped to a laptop screen.

What's in the Box

  • GearLight Radiance 3.5" Ring Light
  • USB Charging Cable (3 feet)
  • User Manual (this document)

Setup

Follow these steps for initial setup and use of your Radiance Ring Light:

  1. Charging the Device: Before first use, fully charge the ring light using the provided 3-foot USB cable. Connect the micro-USB end to the charging port on the ring light and the USB-A end to a compatible USB power source (e.g., computer, wall adapter). The indicator light will show charging status. A full charge provides approximately 2 hours of runtime on the brightest setting.
  2. A 3-foot long USB charging cable for the ring light

    Image: The included 3-foot USB charging cable.

  3. Attaching to Your Device: The ring light features a wide, flexible clip that can attach to edges up to 1.25 inches thick. Carefully clip the light onto the top edge of your phone, laptop, tablet, or desktop monitor, ensuring it is securely positioned. For optimal lighting and to prevent glare on eyeglasses, mount the light off-center or slightly above eye level.
  4. GearLight Radiance Ring Light clipped onto various devices including a laptop, desktop monitor, tablet, and phone

    Image: The ring light demonstrating compatibility with multiple devices.

    Close-up of the flexible wide clip of the ring light

    Image: Detail of the flexible wide clip, showing its 1.25 inch capacity.

Setup Demonstration Video

Video: A demonstration of the GearLight Radiance Selfie Ring Light, including setup and features.

Operating Instructions

The Radiance Ring Light offers adjustable settings to optimize your lighting environment:

  1. Power On/Off: Locate the power button on the back of the ring light. Press once to turn the light on. Press and hold to turn it off.
  2. Adjusting Light Modes: The ring light features three distinct color modes: Daylight, White, and Warm. Press the mode button (usually indicated by a sun icon or 'M') to cycle through these options until you find your preferred color temperature.
  3. Adjusting Brightness Levels: Each color mode has 10 adjustable brightness levels. Use the '+' and '-' buttons to increase or decrease the light intensity.
  4. Illustration of the three color modes (Sunkissed Warm, Natural Daylight, Pearly White) and 10 intensity levels of the ring light

    Image: Visual representation of the three color modes and ten brightness levels.

  5. Portable Use: The compact and lightweight design allows for easy portability. Clip it onto your phone for on-the-go selfies or video calls.
  6. The ring light being held in a hand, demonstrating its pocket-sized and compact nature

    Image: The ring light's small size, fitting easily in a hand or pocket.

  7. Extended Use: For prolonged use, connect the ring light to a power source using the USB charging cable to ensure endless runtime.
  8. A split image showing a person with the ring light on (left) and off (right), highlighting improved lighting, reduced shadows, and minimized blemishes

    Image: A visual comparison demonstrating the lighting improvement provided by the ring light.

Maintenance

  • Keep the device clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Store the ring light in a cool, dry place when not in use.
  • Avoid exposing the device to extreme temperatures or direct sunlight for extended periods.

Troubleshooting

  • Light not turning on: Ensure the device is charged. If using while plugged in, verify the USB cable is securely connected to both the light and the power source.
  • Light not holding a charge: Ensure the charging cable is not damaged and the power source is functional. Allow sufficient time for charging (approximately 2 hours for a full charge).
  • Unstable clip: Ensure the clip is fully opened and securely attached to the device's edge. The maximum compatible thickness is 1.25 inches.

Specifications

FeatureDetail
BrandGearLight
Model NumberRadiance 3.5" Ring Light (GL-35RRLR)
Screen Size (Light Diameter)3.5 Inches
Battery LifeUp to 2 Hours (on brightest setting)
Connectivity TechnologyUSB
Flash Modes DescriptionAdjustable brightness and color temperature (Daylight, White, Warm)
Water Resistance LevelNot Water Resistant
Item Weight0.07 Kilograms
UPC850021168025

Warranty and Support

For warranty information, technical support, or any inquiries regarding your GearLight Radiance 3.5" Ring Light, please refer to the official GearLight website or contact their customer service directly. Keep your purchase receipt for warranty claims.

Visit the GearLight Store for more products and information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.