1. Product Overview
The Cornat Fuerte FUE15 is a high-pressure single-lever basin mixer designed for bathroom use. It features a robust chrome-plated brass body, a convenient pull-out spray, and a waste set. This faucet is suitable for connection to an instantaneous water heater or a central hot water supply system.
Image 1: Cornat Fuerte FUE15 Single-Lever Basin Mixer, showcasing its chrome finish and design.
2. Safety Information
- Always turn off the main water supply before beginning installation or maintenance.
- Ensure all connections are secure and watertight to prevent leaks.
- If you are unsure about any installation steps, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the chrome finish, as this may cause damage.
3. Package Contents
Please check that all components are present before starting installation:
- 1 x Cornat Fuerte FUE15 Single-Lever Basin Mixer
- 1 x Connection Hose (400 mm length)
- 1 x Waste Set (1 1/4")
- Mounting Accessories (gaskets, nuts, etc.)
4. Specifications
| Model Number | FUE15 |
| Brand | Cornat |
| Product Dimensions (L x W x H) | 28 x 20 x 9.5 cm |
| Item Weight | 1.92 kg |
| Material | Brass, Ceramic |
| Finish Type | Chrome |
| Mounting Type | Deck Mounted, Single-hole |
| Number of Handles | 1 (Lever) |
| Maximum Flow Rate | 9 Liters per minute |
| Valve Type | Cartridge Valve (Ceramic) |
| Connection Type | High Pressure (Pressure Resistant) |
| Connection Hose Length | 400 mm |
| Certifications | KTW Compliant |
Image 2: Detailed product dimensions for installation planning.
5. Installation Instructions
This section provides general guidance for installing your Cornat Fuerte FUE15 basin mixer. For detailed diagrams and specific steps, please refer to the included mounting accessories guide.
- Prepare the Installation Area: Ensure the basin has a single mounting hole. Clean the area around the mounting hole. Turn off the main water supply to prevent flooding.
- Mount the Faucet: Insert the faucet into the mounting hole of the basin. From underneath the basin, secure the faucet using the provided mounting accessories (gaskets, washer, and nut). Ensure the faucet is aligned correctly before fully tightening.
- Connect Water Hoses: Attach the flexible connection hoses to the hot and cold water supply lines. Ensure the hot water hose is connected to the hot water inlet and the cold water hose to the cold water inlet on the faucet. Tighten connections firmly but do not overtighten.
- Install the Waste Set: Follow the instructions provided with the 1 1/4" waste set to install it into the basin drain hole. Connect the pull rod from the faucet to the waste set mechanism.
- Check for Leaks: Once all connections are made, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, turn off the water supply and re-tighten the connections.
- Test Operation: Operate the faucet to check water flow and temperature control.
6. Operating Instructions
The Cornat Fuerte FUE15 basin mixer offers precise control over water flow and temperature.
- Water Flow and Temperature: The single lever controls both water flow and temperature. Lift the lever to increase water flow. Move the lever left for hot water and right for cold water.
- Pull-Out Spray: The faucet features a practical pull-out spray head. Gently pull the spray head from the spout to extend it. This allows for comfortable use beyond the basin, ideal for rinsing the basin or filling tall containers. Push the spray head back into the spout until it clicks into place.
Image 3: The pull-out spray head provides extended reach and flexibility.
- Aerator: The integrated aerator provides a soft, air-enriched water jet, reducing splashing and conserving water.
Image 4: The aerator ensures a soft, water-saving flow.
- Waste Set Operation: Use the pull rod located at the back of the faucet to open and close the basin waste plug.
7. Maintenance and Care
- Cleaning: Clean the chrome surface regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Avoid Harsh Chemicals: Do not use abrasive sponges, scouring pads, or cleaners containing alcohol, ammonia, bleach, or phosphoric acid, as these can damage the chrome finish and internal components.
- Aerator Maintenance: Periodically unscrew the aerator from the spout and clean any mineral deposits or debris. Rinse it under running water and reattach it.
- Cartridge Replacement: The faucet is equipped with a durable ceramic cartridge. If you experience persistent dripping or difficulty controlling water flow/temperature, the cartridge may need replacement. Consult a professional or refer to specific cartridge replacement instructions.
8. Troubleshooting
- Low Water Flow: Check if the aerator is clogged with debris. Clean or replace the aerator. Ensure water supply valves are fully open.
- Leaking from Spout: A persistent drip from the spout usually indicates a worn-out cartridge. The ceramic cartridge is replaceable.
- Leaking from Base: Check the tightness of the mounting nut and the condition of the gaskets underneath the basin.
- Difficulty Adjusting Temperature/Flow: This may also indicate a faulty or worn cartridge.
- No Hot/Cold Water: Ensure both hot and cold water supply lines are connected correctly and their respective shut-off valves are open.
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact customer support.
9. Warranty and Support
The Cornat Fuerte FUE15 basin mixer is manufactured to high-quality standards and comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your retailer or the manufacturer directly. Contact details can typically be found on the product packaging or the manufacturer's official website.