1. Introduction
Thank you for choosing the Kircuit AC/DC Adapter. This manual provides essential information for the safe and effective use of your power supply unit. Please read these instructions carefully before use and retain them for future reference. This adapter is designed to provide power to compatible devices, including the PRO-Form 395 E 395E 18/ Extended Stride Elliptical.
2. Safety Information
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Do not disassemble or attempt to repair the adapter. Refer all servicing to qualified personnel.
- Ensure the adapter is connected to a power outlet with the correct voltage (100-240V AC).
- Avoid placing heavy objects on the power cord or bending it excessively.
- Unplug the adapter from the power outlet when not in use for extended periods.
- This adapter features built-in safety protections including short circuit protection, excess voltage protection, over temperature protection, and overcurrent protection.
Diagram illustrating Kircuit's built-in safety protections: Short Cut protection, Excess Voltage protection, Over Temperature protection, and Overcurrent protection.
3. Product Overview
The Kircuit AC/DC Adapter is a high-quality replacement power supply designed for various electronic devices, specifically compatible with the PRO-Form 395 E 395E 18/ Extended Stride Elliptical. It features a durable design and multiple safety mechanisms to ensure reliable power delivery.
Key Features:
- Input: 100V-240V AC, 50/60Hz, 0.3A
- Output: Specific voltage and amperage for compatible devices (refer to device requirements)
- Cord Length: Approximately 6.5 feet (2 meters)
- Built-in Dynamic IC, Charger IC & Power fuse for rapid charging and overcharge protection.
- LED indicator for power status.
Product Components:
Main view of the Kircuit AC/DC adapter with its power cord, showing input and output specifications on the label.
Two Kircuit AC/DC adapters shown from different angles, highlighting their compact design and US plug type.
The Kircuit AC/DC adapter with its coiled power cord, indicating a cord length of 6.5 feet.
The Kircuit AC/DC adapter plugged into a white power strip on a desk, demonstrating its compact size.
Image detailing the durable design of the adapter's cable, showing high-quality materials and thick insulation.
Image comparing Kircuit's durable, UL standard plug design with a less robust alternative.
4. Setup Instructions
Follow these steps to set up your Kircuit AC/DC Adapter:
- Verify Compatibility: Ensure your device, such as the PRO-Form 395 E 395E 18/ Extended Stride Elliptical, requires the specific output voltage and amperage provided by this adapter. Check your device's original power supply or manual for specifications.
- Connect to Device: Insert the DC output plug of the Kircuit adapter firmly into the power input port of your elliptical or compatible device.
- Connect to Power Outlet: Plug the AC input prongs of the adapter into a standard 100-240V AC wall outlet.
- Power On: Once connected, the LED indicator on the adapter should illuminate, signifying that power is being supplied. You can now power on your device.
5. Operating Instructions
The Kircuit AC/DC Adapter operates automatically once connected. It provides a stable power supply to your device. The integrated LED indicator confirms that the adapter is receiving power from the wall outlet and is ready to deliver power to your connected device.
To discontinue use, simply unplug the adapter from the wall outlet first, then disconnect it from your device.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your adapter:
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
- Cable Care: Regularly inspect the power cord for any signs of damage, such as fraying or cuts. If damage is observed, discontinue use immediately and replace the adapter.
7. Troubleshooting
If you encounter issues with your Kircuit AC/DC Adapter, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to device / LED indicator off | Adapter not properly plugged in; Wall outlet not functioning; Device power issue; Adapter malfunction. | Ensure adapter is securely plugged into both the wall outlet and the device. Test the wall outlet with another appliance. Check the device's power switch. If issues persist, the adapter may need replacement. |
| Device not charging/powering on | Incorrect adapter specifications; Device malfunction; Loose connection. | Verify the adapter's output matches your device's requirements. Ensure all connections are firm. Test the device with its original power supply if available. |
| Adapter feels unusually hot | Overload; Poor ventilation; Internal fault. | Ensure the adapter is not covered and has adequate ventilation. Disconnect and allow to cool. If overheating persists, discontinue use and replace. |
8. Specifications
- Model: B08C9RXM51
- Brand: Kircuit
- Input: 100-240V AC, 50/60Hz, 0.3A
- Output: Refer to adapter label for specific voltage and amperage (e.g., 18V DC)
- Cord Length: 6.5 feet (approximately 2 meters)
- Safety Features: Short Circuit Protection, Over Voltage Protection, Over Temperature Protection, Overcurrent Protection
- Manufacturer: Kircuit
- First Available: July 3, 2020
9. Warranty and Support
Kircuit products are designed for reliability and performance. This Kircuit AC/DC Adapter is covered by a 3-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
A Kircuit adapter and its packaging box on a desk, with '3 YEAR' visible on the box, indicating warranty.
For technical support, warranty service, or general inquiries, please contact Kircuit customer service through your retailer or the official Kircuit website. Please have your model number (B08C9RXM51) and purchase date available when contacting support.