Wagan EL8592 4800 Lumens LED Integrated Solar Powered Street Lamp Flood Light

1. Introduction

Thank you for choosing the Wagan EL8592 Solar Powered Street Lamp. This integrated LED flood light is designed for outdoor use, providing powerful illumination with the convenience of solar charging and motion sensing capabilities. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new solar lamp to ensure optimal performance and longevity.

Key Features:

• 4,800 Lumen, 90 LED Super Bright Light: Angle adjustable head with 90 LEDs provides a broad spread of light for wide areas.
• Motion Sensor: Operates in low mode and switches to high mode when motion is detected.
• Long Run Time: The integrated battery can provide up to 3 full nights (36 hours) of light on a single full charge.
• Weather/Waterproof: IP65 rated for protection against water and dust, with over-charge and over-discharge protection for safety.
• Easy to Install: Simple mounting to any hard surface (fence, pole, wall, tree) under direct sunlight.

2. Safety Information

Please read all safety instructions carefully before installing or operating the Wagan EL8592 Solar Lamp. Failure to follow these instructions may result in property damage, injury, or death.

• Always ensure the lamp is securely mounted to prevent falling.
• Do not look directly into the LED light when it is illuminated, as it may cause eye strain or damage.
• Keep the solar panel clean and free of obstructions to ensure efficient charging.
• Do not attempt to disassemble or modify the lamp. Refer all servicing to qualified personnel.
• Dispose of batteries according to local regulations. Do not incinerate batteries.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. Package Contents

Verify that all items are present in the package:

• Wagan EL8592 Solar Powered Street Lamp
• Remote Control
• Mounting Hardware (expansion bolts, nuts, washers)

4. Product Overview

Familiarize yourself with the components of your Wagan EL8592 Solar Lamp.

Figure 4.1: Product Components. This image highlights the key parts of the solar lamp: the monocrystalline solar panel on top, the durable casing, the night sensor and motion sensor on the front, mounting holes for installation, the power button, and the array of LED light bulbs.

Figure 4.2: Solar Lamp with Remote Control. This image displays the complete Wagan EL8592 solar street lamp, mounted on a pole, alongside its dedicated remote control for easy operation.

Figure 4.3: Product Dimensions. This diagram illustrates the physical dimensions of the Wagan EL8592 solar lamp, measuring 28.0 inches in length, 11.3 inches in width, and 3.0 inches in thickness.

5. Setup and Installation

Proper installation is crucial for the optimal performance of your solar lamp. Choose a location that receives direct sunlight for at least 6-8 hours daily.

5.1 Mounting Options

The Wagan EL8592 offers multiple mounting options:

• Wall Mount: Mount directly to a building wall using the included expansion bolts, nuts, and washers.
• Pole Mount: Attach to a standing or projecting pole (not included) using the included rear bracket, bolts, nuts, and washers.

Figure 5.1: Multiple Mounting Options. This image demonstrates the versatility of the Wagan EL8592, showing how it can be mounted on various types of poles or directly onto a wall, with close-ups of the required mounting hardware.

Figure 5.2: Wall Mount Example. This photograph shows the Wagan EL8592 solar lamp securely mounted on an exterior wall, effectively lighting up an outdoor space.

5.2 Adjustable Installation Angle

The lamp head can be adjusted to optimize light coverage and solar panel exposure.

Figure 5.3: Adjustable Installation Angle. This diagram illustrates how the lamp's angle can be adjusted, providing flexibility to direct light and optimize solar charging.

5.3 Installation Steps

1. Select a mounting location that receives maximum direct sunlight throughout the day.
2. Using the lamp's mounting bracket as a template, mark the drilling points on the desired surface (wall or pole).
3. Drill holes at the marked points.
4. Secure the mounting bracket to the surface using the provided hardware.
5. Attach the solar lamp to the mounted bracket, ensuring it is firmly secured.
6. Adjust the lamp head to the desired angle.
7. Press the power button on the lamp to activate it. The lamp will automatically turn on at dusk and off at dawn.

6. Operating Instructions

The Wagan EL8592 is designed for automatic operation, but also features a remote control for customized settings.

6.1 Automatic Operation

• The integrated light sensor (dusk-to-dawn sensor) automatically turns the lamp on at dusk and off at dawn.
• The motion sensor keeps the light in a low-power mode until motion is detected, at which point it switches to full brightness. After a period of no motion, it returns to low mode.

6.2 Remote Control Functions

The included remote control allows you to adjust various settings:

• Power Button: Turns the lamp ON/OFF.
• Constant Lighting Mode: Activates continuous illumination at a set brightness.
• Sensor Mode: Activates the motion sensor functionality (low light until motion detected, then full brightness).
• Time Settings (2H, 4H, 6H, 8H, 10H, 12H): Sets the duration for constant lighting mode.
• Brightness Settings (50%, 80%, 100%): Adjusts the light output intensity.

7. Maintenance

Regular maintenance ensures the longevity and efficiency of your solar lamp.

• Cleaning the Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency.
• Cleaning the Light Fixture: Clean the LED light surface and casing with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
• Battery Care: The integrated Lithium-Ion battery is designed for long life. For best performance, ensure the lamp receives adequate sunlight daily. Avoid prolonged storage in a completely discharged state.
• Operating Temperature: The lamp is designed to operate in a wide range of temperatures, from -4°F to 140°F (-20°C to 60°C).

Figure 7.1: Operating Temperature Range. This image illustrates the robust design of the Wagan EL8592, capable of functioning effectively in temperatures ranging from extreme cold (-4°F) to intense heat (140°F).

8. Troubleshooting

If you encounter issues with your Wagan EL8592 Solar Lamp, refer to the following common problems and solutions:

9. Specifications

Detailed technical specifications for the Wagan EL8592 Solar Lamp:

10. Warranty Information

The Wagan EL8592 Solar Powered Street Lamp comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

Please retain your proof of purchase for warranty claims.

11. Customer Support

For further assistance, technical support, or warranty inquiries, please contact Wagan customer service or visit their official website:

• Wagan Official Website: www.wagan.com
• Wagan Store on Amazon: Visit the Wagan Store

Wagan is a US-based, family-owned and operated company committed to providing reliable quality and dedicated customer support.