Leeleberd 50ft RGB LED Strip Lights User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Leeleberd 50ft RGB LED Strip Lights, Model T-100. Please read this manual carefully before use to ensure proper functionality and safety.

Safety Information

• This product is designed for indoor use only. Do not expose to water or high humidity.
• Ensure the power adapter is connected to a suitable power outlet (24 Volts).
• Do not cover the LED strips or power adapter with flammable materials.
• Avoid direct eye exposure to the LED light.
• Keep out of reach of children.
• Do not attempt to repair or modify the product. Contact customer support for assistance.

Package Contents

Verify that all components are present in the package:

• 50ft RGB LED Strip Light
• Power Adapter
• IR Remote Control
• Control Box (with Bluetooth receiver)
• User Manual (this document)

Image: Overview of the Leeleberd 50ft RGB LED Strip Lights, including the strip, remote, and power adapter.

Setup and Installation

1. Prepare the Surface: Clean and dry the surface where you intend to install the LED strip. Ensure it is smooth and free of dust or oil for optimal adhesive performance.
2. Unroll the Strip: Carefully unroll the LED strip. Avoid bending it sharply or twisting it.
3. Connect Components:
   • Connect the LED strip to the control box. Ensure the arrows on both connectors align.
   • Connect the power adapter to the control box.
   • Plug the power adapter into a wall outlet.
   

   Image: Diagram illustrating the connection process: power adapter to control box, and control box to LED strip, ensuring arrow-to-arrow alignment.

4. Adhere the Strip: Peel off the protective backing from the adhesive tape on the back of the LED strip. Press the strip firmly onto the prepared surface.
5. Cutting and Linking (Optional): The LED strip can be cut every 3 LEDs along the designated cutting marks. Use a specific connector (not included, but mentioned in product description) to extend or re-link cut sections if desired. Ensure power is disconnected before cutting.

Operating Instructions

1. Bluetooth App Control

The LED strip lights can be controlled via a smartphone application for advanced features.

1. Download the App: Scan the QR code located on the white control box or search for the "Keepsmile" app (as indicated in image) in your device's app store.
2. Enable Bluetooth: Ensure Bluetooth is enabled on your smartphone.
3. Connect to Lights: Open the app. The app should automatically detect and connect to the LED strip lights. If not, follow the in-app instructions to add your device.
4. App Features:
   • Color Selection: Choose from millions of colors using the color wheel or preset options.
   • Brightness Adjustment: Adjust the light intensity.
   • Lighting Modes: Select various dynamic modes such as strobe, static, transition, and gradient.
   • Music Sync: Utilize the built-in microphone to synchronize light changes with music beats or ambient sounds.
   • Scheduling: Set timers to automatically turn the lights on or off at specific times.

Image: Example of the smartphone application interface, showing color selection and various control options.

Image: Bluetooth LED strip lights illuminating a room during a social gathering, controlled via a smartphone app.

2. IR Remote Control

The included IR remote control provides direct access to essential lighting functions.

1. Activate Remote: Remove the clear plastic tab from the battery compartment of the remote control before first use.
2. Point Remote: Point the remote control directly at the IR receiver on the control box for optimal response.
3. Remote Functions:
   • Power On/Off: Turn the lights on or off.
   • Color Buttons: Select primary colors (Red, Green, Blue, White) and various mixed colors.
   • DIY Colors: Create and save custom colors.
   • Brightness Up/Down: Adjust the light intensity.
   • Mode Selection: Cycle through different lighting effects (e.g., flash, fade, jump).
   • Speed Adjustment: Control the speed of dynamic lighting modes.

Image: The IR remote control, showing buttons for color selection, brightness, and various lighting modes.

3. Music Synchronization (Microphone Mode)

The LED strip lights feature a built-in microphone that allows them to react to sound and music.

• Activate Music Mode via the smartphone app or remote control (if available).
• The lights will change color and intensity in response to ambient sounds or music played nearby.

Image: LED strip lights displaying dynamic colors, synchronized with music, enhancing the atmosphere of a room.

Maintenance

• Cleaning: Disconnect power before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Adhesive: If the adhesive weakens over time, additional adhesive clips or double-sided tape may be used to secure the strip.
• Storage: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.

Troubleshooting

Specifications

Warranty and Support

Leeleberd products are manufactured with quality and reliability in mind. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Leeleberd website.

Please retain your proof of purchase for any warranty claims.