Introduction
The V7 UCDDS1080P Universal USB-C Docking Station is designed to expand the connectivity of your computer, adding essential ports for enhanced productivity. This docking station allows you to connect dual HDMI displays, multiple USB 3.1 accessories, Gigabit Ethernet, and combo audio, all while providing up to 85 Watts of power delivery to your host computer via a single USB-C connection.
Product Features
- Connect your computer to monitors and various accessories, and charge your computer simultaneously via a single USB-C cable.
- Two HDMI 1.4 ports supporting up to 1080p resolution with a 60Hz refresh rate.
- Three USB 3.1 ports: two rear ports for general accessories (5V/.9A) and one front port supporting Battery Charge (BC 1.2) and Apple Charge 2.4A for faster device charging.
- Gigabit Ethernet port for stable and high-speed wired network connectivity.
- Combo 3.5 mm Audio In/Out jack for connecting headphones or a microphone.
- USB-C Power Delivery (PD 3.0) up to 85 Watts to charge your mobile computer.
- Thunderbolt compatible for broad device support.
Setup Instructions
- Connect Power: Plug the external power adapter into the DC IN port on the rear of the docking station, then connect it to a wall outlet.
- Connect to Computer: Connect the integrated USB-C cable from the docking station to an available USB-C port on your computer.
- Connect Displays: Connect up to two HDMI displays to the HDMI ports on the rear of the docking station using HDMI cables.
- Connect Peripherals: Connect your USB devices (e.g., keyboard, mouse, external hard drive) to the available USB 3.1 ports. Use the front USB port for faster charging of compatible devices.
- Connect Network: For a wired internet connection, connect an Ethernet cable from your router or modem to the Gigabit Ethernet port on the docking station.
- Connect Audio: Plug your headphones or microphone into the 3.5mm combo audio jack on the front of the docking station.
Rear panel of the docking station, featuring power input, Gigabit Ethernet, two USB 3.1 ports, and two HDMI outputs.
Front panel of the docking station, including a combo 3.5mm audio jack, a USB 3.1 port with charging capabilities, a USB-C port for host connection, and the power button.
Operating Instructions
- Power On/Off: Press the power button on the front panel to turn the docking station on or off.
- Display Configuration: Your computer should automatically detect the connected external displays. You can configure display settings (e.g., extend desktop, mirror displays, set primary display) through your operating system's display settings. The docking station supports up to 1080p resolution at 60Hz for each HDMI output.
- USB Connectivity: Use the USB 3.1 ports for connecting various USB devices. The front USB port offers enhanced charging capabilities for compatible smartphones and tablets.
- Network Connection: The Gigabit Ethernet port provides a stable and fast wired network connection, ideal for reliable internet access.
- Audio Functionality: The 3.5mm combo audio jack allows you to connect standard headphones or a headset with a microphone for audio input and output.
- Power Delivery: When connected to its power adapter and your computer via USB-C, the docking station will charge your laptop, providing up to 85 Watts of power.
Detailed diagram highlighting the input and output ports of the V7 UCDDS1080P docking station, including USB, HDMI, Ethernet, and Power Delivery.
Maintenance
- Keep the docking station clean by wiping it with a soft, dry cloth. Avoid using liquid cleaners or solvents.
- Ensure the device is placed in a well-ventilated area to prevent overheating.
- Protect the docking station from extreme temperatures, direct sunlight, and high humidity.
- Do not attempt to open or repair the device. Refer all servicing to qualified personnel.
Troubleshooting
- No Display Output:
- Verify all HDMI cables are securely connected to both the docking station and your monitors.
- Ensure the USB-C connection between the docking station and your computer is firm.
- Check your computer's display settings to ensure external monitors are detected and configured correctly (e.g., extended or mirrored).
- Restart your computer and the docking station.
- USB Devices Not Working:
- Confirm the docking station is powered on.
- Try connecting the USB device to a different USB port on the docking station.
- Test the USB device directly with your computer to determine if the issue is with the device itself.
- No Network Connection:
- Check the Ethernet cable connection to both the docking station and your network router/modem.
- Verify your computer's network settings.
- Ensure the docking station is powered on.
- Laptop Not Charging:
- Ensure your computer supports USB-C Power Delivery.
- Confirm the docking station's external power adapter is securely connected and plugged into a working power outlet.
- Check the USB-C connection between the docking station and your laptop.
Specifications
| Feature | Detail |
|---|---|
| Model Number | UCDDS1080P |
| Product Dimensions | 3.7 x 3.7 x 1.3 inches |
| Item Weight | 6.4 ounces |
| Color | Black |
| Hardware Interface | USB-C, HDMI, USB 3.1, Ethernet, 3.5mm Audio |
| Compatible Devices | Universal for USB-C Powered Devices |
| Total USB Ports | 3 |
| Total HDMI Ports | 2 |
| HDMI Resolution | Up to 1080p @ 60Hz (Dual Display) |
| Power Delivery | Up to 85 Watts |
| Ethernet Speed | Gigabit (10/100/1000 Mbps) |
| UPC | 662919106954 |
| Batteries | 1 A batteries required (Note: This specification may refer to a generic requirement or internal component, as the device is primarily externally powered.) |
Warranty and Support
V7 products are typically backed by a manufacturer's warranty. For detailed information regarding the warranty period and terms for your UCDDS1080P Universal USB-C Docking Station, please refer to the warranty card included with your product or visit the official V7 website. For technical support, troubleshooting assistance, or any product-related inquiries, please contact V7 customer service or visit their support portal online.