Introduction
Welcome to your Spigen Slim Armor Case. This manual provides instructions for proper installation, use, and maintenance of your new protective case, designed specifically for the iPhone 12 Pro Max.
The Spigen Slim Armor case offers robust protection with its dual-layer hybrid structure, combining a flexible Thermoplastic Polyurethane (TPU) inner layer with a rigid Polycarbonate (PC) outer shell. It also features an integrated kickstand for enhanced functionality and Air Cushion Technology for superior impact absorption.
Image: The Spigen Slim Armor case features Air Cushion Technology in its corners for enhanced drop protection.
Installation Guide
1. Verify Device Compatibility
Ensure your device is the iPhone 12 Pro Max (6.7-inch model). This case is specifically designed for this model and is not compatible with iPhone 12, iPhone 12 Pro (6.1-inch), or iPhone 12 mini (5.4-inch).
Image: Compatibility chart illustrating that the case is exclusively for the iPhone 12 Pro Max (6.7-inch).
2. Case Installation
To install the case, first ensure your iPhone 12 Pro Max is clean and free of dust or debris.
- Gently align the top edge of your iPhone with the top edge of the soft TPU inner layer of the case.
- Insert the phone into the TPU layer, ensuring all corners are properly seated and the phone is snug.
- Once the phone is securely in the TPU layer, snap the rigid polycarbonate outer shell over the TPU layer. Start from one side and work your way around until it clicks into place, ensuring all edges are covered.
Image: Exploded view demonstrating the two-part installation of the Spigen Slim Armor case.
Using the Integrated Kickstand
Your Spigen Slim Armor case features a built-in kickstand for convenient hands-free viewing of media.
- Locate the kickstand on the back of the case, near the camera cutout.
- Gently pull the kickstand outwards from its recess until it locks into an open position.
- Place your iPhone on a flat surface in landscape orientation to utilize the kickstand for media viewing.
- To close, push the kickstand back into its recess until it lies flush with the case. Ensure it is fully closed to prevent accidental opening.
Image: Detail of the integrated kickstand in its extended position.
Care and Maintenance
To keep your Spigen Slim Armor case in optimal condition and prolong its lifespan:
- Regularly clean the case with a soft, damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the material and finish of the case.
- For stubborn dirt or smudges, a mild soap solution can be used. After cleaning, wipe with a clean, damp cloth and allow the case to air dry completely before reattaching it to your phone.
- Periodically remove the case from your phone to clean any dust or debris that may accumulate between the phone and the case, which can prevent scratches.
Troubleshooting
Case does not fit iPhone 12 Pro Max:
Ensure you have the correct device model, iPhone 12 Pro Max (6.7-inch). This case is not compatible with other iPhone 12 models. Refer to the "Verify Device Compatibility" section for detailed information.
Kickstand does not stay open:
Ensure the kickstand is fully extended until it clicks into its locked position. If it still does not hold, inspect for any obstructions or damage to the hinge mechanism. Avoid forcing the kickstand.
Case appears dirty or discolored:
Follow the cleaning instructions provided in the "Care and Maintenance" section. Over time, some materials may show signs of wear or discoloration depending on usage, environmental factors, and exposure to certain substances.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Spigen |
| Model Name | Slim Armor |
| Model Number | ACS01480 |
| Compatible Device | iPhone 12 Pro Max |
| Material | Polycarbonate (PC), Thermoplastic Polyurethane (TPU) |
| Color | Gunmetal |
| Key Features | Dual-layer protection, Air Cushion Technology, Integrated Kickstand |
| Dimensions (L x W x H) | 16.7 x 8.4 x 1.2 Centimeters |
| Item Weight | 48 Grams |
| Box Contents | 1 x Spigen Slim Armor Case |
Warranty Information
This Spigen product comes with a 1-year warranty against manufacturing defects from the date of purchase.
The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, normal wear and tear, or damage resulting from improper installation or maintenance.
To claim warranty service, please retain your proof of purchase and contact Spigen customer support through the channels listed in the Support section.
Customer Support
For further assistance, product inquiries, or warranty claims, please visit the official Spigen website or contact their customer service department.
Online Support: www.spigen.com/pages/contact-us
Manufacturer Contact Information: Spigen Korea Co., Ltd. / SpigenHQ, 446, Bongeunsa-ro, Gangnam-gu, Seoul, Rep. of Korea.
