Product Overview
Gorilla Mounting Putty is a versatile, non-toxic, and repositionable adhesive solution designed for securely hanging lightweight items without causing damage to surfaces. It serves as an excellent alternative to traditional tapes, push pins, and fasteners, making it ideal for various indoor applications and temporary outdoor use.
This image displays three individual packages of Gorilla Mounting Putty. Each package is orange and white, highlighting that the putty is non-toxic, removable, and repositionable, and holds up to 2 lbs. The packages show the natural tan color of the putty squares.
What's Included
- 3 x 2oz (56g) packs of Gorilla Mounting Putty (84 pre-cut squares per pack)
Key Features
- No mess or holes: Ideal for hanging lightweight items without damaging surfaces.
- Safe to use: Non-toxic, low residue, and does not leave color behind.
- Adjustable: Removable and repositionable for flexible placement.
- Easy to use: Pre-cut squares are ready to use and can hold up to 2 lbs.
- Versatile: Suitable for use on paper, painted walls, wood, tile, metal, posters, plastic, glass, and more.
An infographic illustrating the holding power of Gorilla Mounting Putty. It states 'Holds up to 2 lbs' and advises using '4 squares per 1lb of weight' for optimal performance.
This image shows six different material textures: brick, painted wall, wood, tile, metal, and plastic, with checkmarks indicating that Gorilla Mounting Putty sticks to all of them.
This image highlights the convenience of pre-cut squares, showing a hand easily peeling a single square of putty from the larger sheet, ready for application.
A detailed diagram illustrating the compact size of each putty square, measuring 11mm by 9mm, and confirming its neutral tan color.
This image shows a woman and a child happily attaching drawings to a wall, emphasizing the putty's ease of use, removability, and repositionable nature without leaving mess or residue.
Setup and Application
Preparation
Before applying Gorilla Mounting Putty, ensure that both the surface where the item will be mounted and the item itself are clean and dry. This will help achieve the strongest bond.
Application Steps
- Remove the desired amount of putty squares directly from the package without kneading.
- Apply approximately 4 squares of putty per 1lb of weight to the object being mounted. Ensure even distribution of weight.
- Press the object firmly in place for 30 seconds to allow the Gorilla Mounting Putty to conform to the surface and create a strong bond.
The reverse side of the Gorilla Mounting Putty packaging, providing comprehensive instructions for use, including surface preparation, application steps, usage tips, important warnings, and storage recommendations.
Usage Tips
- Apply when the temperature is above 50°F (10°C). The recommended in-use temperature range is 50-85°F (10-30°C).
- To remove mounted items, do so carefully and dab any excess putty with the removed putty to lift it cleanly.
Important Considerations and Warnings
- Not for use on applications where injury could result if the mounted item fell.
- Not recommended for use on freshly painted walls or flocked wallpaper.
- Avoid direct exposure to water.
- May stain some surfaces. Test in an inconspicuous area first if concerned.
- Not recommended for hanging objects over 2lbs.
Storage
Store Gorilla Mounting Putty in a cool, dry place to maintain its effectiveness and longevity.
Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 9.25 x 6.75 x 1 inches; 9.52 ounces (total package) |
| Item Model Number | Removable |
| Material | Synthetic Rubber |
| Compatible Materials | Wood, Glass, Paper, Plastic, Metal |
| Item Form | Putty |
| Special Feature | Strong, Repositionable |
| Manufacturer | The Gorilla Glue Company |
Troubleshooting
Item Not Sticking Properly
- Ensure both surfaces (item and mounting surface) are completely clean and dry before application.
- Verify that you are using enough putty. The recommendation is approximately 4 squares per 1lb of weight.
- Press the item firmly against the surface for the recommended 30 seconds to allow the putty to properly adhere and conform.
- Check the weight of the item; Gorilla Mounting Putty is not recommended for objects over 2lbs.
Putty Leaving Residue
- If any residue is left on the surface after removal, use a fresh piece of Gorilla Mounting Putty to dab and lift the excess residue.
- Avoid rubbing the residue, as this can spread it.
Warranty and Support
Specific warranty information for Gorilla Mounting Putty is not provided in this manual. For detailed warranty terms, product support, or any inquiries, please contact The Gorilla Glue Company directly through their official website or customer service channels.